|
Korean Journal of Chemical Engineering
1-7 |
Facility siting and plant layout optimization for chemical process safety Jung S |
8-13 |
Application of hollow fiber supported liquid membrane as a chemical reactor for esterification of lactic acid and ethanol to ethyl lactate Teerachaiyapat T, Ramakul P |
14-24 |
Evaluation of multiloop chemical dosage control strategies for total phosphorus removal of enhanced biological nutrient removal process Garikiparthy PSN, Lee SC, Liu H, Kolluri SS, Esfahani IJ, Yoo CK |
25-32 |
Dynamic optimization of maintenance and improvement planning for water main system: Periodic replacement approach Kim JW, Choi GB, Suh JC, Lee JM |
33-45 |
Estimation of local concentration from measurements of stochastic adsorption dynamics using carbon nanotube-based sensors Jang H, Lee JH, Braatz D |
46-56 |
Optimization study of pressure-swing distillation for the separation process of a maximum-boiling azeotropic system of water-ethylenediamine Fulgueras AM, Poudel J, Kim DS, Cho J |
57-62 |
Microfluidic room temperature ionic liquid droplet generation depending on the hydrophobicity and interfacial tension Hwang JW, Choi JH, Choi B, Lee G, Lee SW, Koo YM, Chang WJ |
63-72 |
Modeling and experimental studies of ammonia absorption in a spray tower Zhu J, Liu Z, Bai J, Yang Y, Peng Q, Ye S, Chem M |
73-79 |
Performance analysis of K-based KEP-CO2P1 solid sorbents in a bench-scale continuous dry-sorbent CO2 capture process Park YC, Jo SH, Lee SY, Moon JH, Ryu CK, Lee JB, Yi CK |
80-89 |
Selective hydrogenation of sunflower oil over Ni catalysts Cepeda EA, Calvo B, Sierra I, Iriarte-Velasco U |
90-98 |
Optimization of biodiesel production from a calcium methoxide catalyst using a statistical model Suwanthai W, Punsuvon V, Vaithanomsat P |
99-106 |
Sustainable production of acetaldehyde from lactic acid over the carbon catalysts Tang C, Peng J, Li X, Zhai Z, Gao H, Bai W, Jiang N, Liao Y |
107-113 |
Preparation of titanium dioxide/tungsten disulfide composite photocatalysts with enhanced photocatalytic activity under visible light Zheng L, Zhang W, Xiao X |
114-119 |
Preparation of Cu/ZnO catalyst using a polyol method for alcohol-assisted low temperature methanol synthesis from syngas Jeong Y, Kang JY, Kim I, Jeong H, Park JK, Park JH, Jung JC |
120-125 |
Fabrication of bioanode by using electrically conducting polythiophene via entrapment technique Inamuddin, Beenish, Naushad M |
126-131 |
Efficient and selective oxidation of olefins and alcohols using nanoparticles of WO3-supported manganese oxides (W1-xMnxO3) Amini M |
132-139 |
Deep extractive desulfurization of oil over 12-Molibdophosphoric acid encapsulated in metal-organic frameworks Rafiee E, Nobakht N |
140-146 |
Ethylene and mixed 2-butene cis/trans isomers metathesis: Influence of lanthanum as a second metal on the WO3/SiO2 catalysts Poovarawan N, Thitiapichart T, Suriye K, Panpranot J, Limsangkass W, Aires FJCS, Praserthdam P |
147-153 |
Ash deposition characteristics of Moolarben coal and its blends during coal combustion Lee BH, Kim SI, Kim SM, Oh DH, Gupta S, Jeon CH |
154-158 |
Improvement of sediment microbial fuel cell performance by application of sun light and biocathode Najafgholi Z, Rahimnejad M |
159-169 |
Removal of Pb2+ from the aqueous solution by tartrate intercalated layered double hydroxides Shen Y, Zhao X, Zhang X, Li S, Liu D, Fan L |
170-177 |
Removal of UO2 2+ from aqueous solution using halloysite nanotube-Fe3O4 composite He W, Chen Y, Zhang W, Hu C, Wang J, Wang P |
178-188 |
Ultrasound-assisted adsorption of textile dyes using modified nanoclay: Central composite design optimization Hassani A, Soltani RDC, Kiransan M, Karaca S, Karaca C, Khataee A |
189-196 |
Electrochemical degradation of the Acid Orange 10 dye on a Ti/PbO2 anode assessed by response surface methodology Bonyadinejad G, Sarafraz M, Khosravi M, Ebrahimi A, Taghavi-Shahri SM, Nateghi R, Rastaghi S |
197-206 |
Separation of mercury and arsenic from produced water via hollow fiber contactor:Kinetic and mass transfer analysis Sribudda D, Wannachod T, Ramakul P, Pancharoen U, Phatanasri S |
207-215 |
Degradation of ultrahigh concentration pollutant by Fe/Cu bimetallic system at high operating temperature Lai B, Ji Q, Yuan Y, Yuan D, Zhou Y, Wang J |
216-222 |
Immobilization of cellulase on functionalized cobalt ferrite nanoparticles Bohara RA, Thorat ND, Pawar SH |
223-229 |
An integrated process for continuous cellulosic bioethanol production Han M, Kim Y, Cho WS, Cho GW, Chung BW |
230-237 |
Enhancement of lipid production in marine microalga Tetraselmis sp. through salinity variation Kim G, Lee CH, Lee K |
238-247 |
Application of novel nanobiocomposites for removal of nickel(II) from aqueous environments: Equilibrium, kinetics, thermodynamics and ex-situ studies Varghese LR, Das D, Das N |
248-254 |
Vapor-liquid equilibria for the binary mixtures of dimethyl ether (DME)+dimethyl carbonate (DMC) Jeong WJ, Lim JS |
255-259 |
Hydrogen bond dynamics in liquid water: Ab initio molecular dynamics simulation Kim C, Yeom MS, Kim E |
260-264 |
Measurement and correlation of vapor-liquid equilibria for a binary system containing 1-butyl-3-methylimidazolium tridecafluorohexylsulfonate and carbon dioxide Hong SK, Park YK |
265-270 |
Solvent recovery in solvent deasphalting process for economical vacuum residue upgrading Ahn S, Shin S, Im SI, Lee KB, Nho NS |
271-276 |
Excess volume and excess enthalpy of binary mixtures composed of 1,2-dichloropropane and 1-alkanol (C5-C8) Sim HW, Kim MG |
277-284 |
Phase behavior for the poly(alkyl methacrylate)+supercritical CO2+DME mixture at high pressures Choi YS, Chio SW, Byun HS |
285-289 |
Flame retardant coated polyolefin separators for the safety of lithium ion batteries Lee JY, Shin SH, Moon SH |
290-298 |
High surface area polyaniline nanofiber synthesized in compressed CO2 and its application to a hydrogen sensor Pham QM, Kim S |
299-304 |
Improving the tensile strength of carbon nanotube yarn via one-step double [2+1] cycloadditions Kim HJ, Lee J, Park B, Sa JH, Jung A, Kim T, Park J, Hwang W, Lee KH |
305-311 |
A simple synthesis of Ag2+xSe nanoparticles and their thin films for electronic device applications Vo DQ, Dung DD, Cho S, Kim S |
312-318 |
Preparation of monodisperse poly(styrene-co-divinylbenzene) microspheres by vibration dispersion method Wang Y, Li G, Chen S, Si R, Fan J |
319-329 |
Synthesis and characterization of polyhedral oligomeric silsesquioxane-based waterborne polyurethane nanocomposites Honarkar H, Barmar M, Barikani M, Shokrollahi P |
330-336 |
Morphology, thermal, mechanical, and barrier properties of graphene oxide/poly(lactic acid) nanocomposite films Kim SW, Choi HM |
337-343 |
Characteristics and intermolecular interaction of eutectic binary mixtures: Reline and Glyceline Mjalli FS, Ahmed OU |
344-349 |
Electrochemical sensor applications of Pt supported porous gold electrode prepared using cellulose-filter Kim J, Oh SY, Park JY, Kim Y |
|