Abstract.We evaluated the correlation between the biomass constituents and their kinetic values. To simplify the models and indicate the effect of each constituent, pure biomass components and their mixtures were used as biomass model. The experiments were set up based on simplex-lattice design. The pyrolysis of synthesized biomass was performed by non-isothermal thermogravimetric analyzer. Several kinetic models in the literature, including Kissinger-Akahira-Sunose, Ozawa-Flynn-Wall and analytical method were used to determine kinetic values for each experiment. The generated regression models and predicted kinetic values from those methods were compared. The results obtained from analytical model (for n≠1) showed a good agreement (R2>0.95) with those obtained from experiments. This study also provide contour plots for all cases in order to observe the behavior of biomass pyrolysis at different component ratio.
Choobuathong N, Effects of chemical composition of biomass on pyrolysis and combustion, Department of Chemical Technology, Chulalongkorn University, Bangkok (2007)., 2007
Unz S, Wen T, Beckmann M, Characterization of biomass used in thermal processes with regard to the kinetic properties, 35th
International Technical Conference on Clean Coal & Fuel Systems, Clearwater, Florida, USA (2010)., 2010
Liu Q, Zhong Z, Wang S, Luo Z, J. Anal. Appl. Pyrolysis, 90, 213, 2011
TAPPI PRESS, Atlanta, USA. TAPPI Standard T-222 om-98, “Acidinsoluble lignin in wood and pulp, TAPPI Test Methods”, TAPPI PRESS, Atlanta, USA (1998)., 1998
Browning BL, Methods of wood chemistry, Wiley Inter-Science Publishers, New York (1967)., 1967
TAPPI Official Test Method T 203 om-88, “Alpha-, Beta-, and Gamma-Cellulose in Pulp”, the TAPPI Press, Atlanta, Georgia, revised 1988, correction 1992, pp. 1-3 (1988)., 1988
White JE, Catallo WJ, Legendre BL, J. Anal. Appl. Pyrolysis, 91, 1, 2011
Kissinger HE, Anal. Chem., 29, 1702, 1957
Akahira T, Sunose T, Research Report of Chiba Institute of Technology, 16, 22, 1971