|
Total 11 articles [ 저자: Piumsomboon P ] |
No. |
Article |
1 |
Korean Journal of Chemical Engineering, 38 (3), pp.540-551 (2021) Computational fluid dynamics simulation of methanol to olefins in stage circulating fluidized bed riser: Effect of reactor stage parameters on product yields Soanuch C, Korkerd K, Phupanit J, et al. |
2 |
Korean Journal of Chemical Engineering, 32 (6), pp.1081-1093 (2015) Evaluation of biomass component effect on kinetic values for biomass pyrolysis using simplex lattice design Chayaporn S, Sungsuk P, Sunphorka S, et al. |
3 |
Korean Journal of Chemical Engineering, 31 (2), pp.350-363 (2014) Characterization of fluidization regime in circulating fluidized bed reactor with high solid particle concentration using computational fluid dynamics Chalermsinsuwan B, Thummakul T, Gidaspow D, et al. |
4 |
Korean Journal of Chemical Engineering, 30 (4), pp.963-975 (2013) Comparisons of particle cluster diameter and concentration in circulating fluidized bed riser and downer using computational fluid dynamics simulation Chalermsinsuwan B, Gidaspow D, Piumsomboon P |
5 |
Korean Journal of Chemical Engineering, 29 (11), pp.1525-1530 (2012) Catalytic steam reforming of biomass-derived tar for hydrogen production with K2CO3/NiO/γ-Al2O3 catalyst Kuchonthara P, Puttasawat B, Piumsomboon P, et al. |
6 |
Korean Journal of Chemical Engineering, 28 (3), pp.686-696 (2011) Experiment and 3D simulation of slugging regime in a circulating fluidized bed Amornsirirat C, Chalermsinsuwan B, Mekasut L, et al. |
7 |
Korean Journal of Chemical Engineering, 24 (6), pp.936-941 (2007) Furfural production by acid hydrolysis and supercritical carbon dioxide extraction from rice husk Sangarunlert W, Piumsomboon P, Ngamprasertsith S |
8 |
Korean Journal of Chemical Engineering, 24 (6), pp.989-995 (2007) Co-combustion of coal and biomass in a circulating fluidized bed combustor Prompubess C, Mekasut L, Piumsomboon P, et al. |
9 |
Korean Journal of Chemical Engineering, 24 (4), pp.612-617 (2007) Effect of the geometry and pattern of the flow channel on the performance of polymer electrolyte membrane fuel cell Hongthong K, Pruksathorn K, Piumsomboon P, et al. |
10 |
Korean Journal of Chemical Engineering, 23 (4), pp.570-575 (2006) Optimum condition of membrane electrode assembly fabrication for PEM fuel cells Nakrumpai B, Pruksathorn K, Piumsomboon P |
|
|