Issue
Total 140 articles [ 키워드: Coal ]
No. Article
31 Korean Journal of Chemical Engineering, 34 (5), pp.1554-1562 (2017)
A mode transition strategy from air to oxyfuel combustion in a 35MW coal-fired power plant boiler
Luo Z, Cheng W, Wu B, et al.
32 Korean Journal of Chemical Engineering, 34 (5), pp.1563-1575 (2017)
Experimental and numerical predictions of ash particle erosion in SCR monolithic catalysts for coal-fired utility boilers
Yu C, Si F, Ren S, et al.
33 Korean Journal of Chemical Engineering, 34 (4), pp.1238-1249 (2017)
Comparison of catalytic pyrolysis and gasification of Indonesian low rank coals using lab-scale bubble fluidized-bed reactor
Kang TJ, Park HJ, Namkung H, et al.
34 Korean Journal of Chemical Engineering, 34 (4), pp.1273-1280 (2017)
Impact of co-firing lean coal on NOX emission of a large-scale pulverized coal-fired utility boiler during partial load operation
Zheng Y, Gao X, Sheng C
35 Korean Journal of Chemical Engineering, 34 (1), pp.54-61 (2017)
Pneumatic transport characteristics of coarse size pulverized coal for the application of fast circulating fluidized bed gasification
Lee JW, Chung SW, Ryu SO, et al.
36 Korean Journal of Chemical Engineering, 34 (1), pp.105-109 (2017)
Bio-solubilization of the untreated low rank coal by alkali-producing bacteria isolated from soil
Baylon MG, David Y, Pamidimarri SDVN, et al.
37 Korean Journal of Chemical Engineering, 33 (12), pp.3401-3406 (2016)
Efficient in situ drying of low rank coal in a pressurized down-flow flash dryer
Yi M, Lee JW
38 Korean Journal of Chemical Engineering, 33 (10), pp.2788-2801 (2016)
Advances in the biological treatment of coal for synthetic natural gas and chemicals
Sudheer PDVN, David Y, Chae CG, et al.
39 Korean Journal of Chemical Engineering, 33 (9), pp.2610-2621 (2016)
Operational characteristics of the pilot-scale coal gasification with filtration and hot fuel gas desulfurization
Lee J, Kang SH, Kim HS, et al.
40 Korean Journal of Chemical Engineering, 33 (7), pp.2142-2159 (2016)
Coal and solvent properties and their correlation with extraction yield under mild conditions
Kim K, Cho H, Lee S, et al.
[1] [2] [3] 4 [5] [6] [7] [8] [9] [10]