Issue
Korean Journal of Chemical Engineering,
Vol.35, No.11, 2296-2302, 2018
A strategy to prepare internally plasticized PVC using a castor oil based derivative
Internally plasticized PVC was prepared via chemical reaction of azide PVC and alkynyl group containing castor oil methyl ester. The chemical structure of alkynyl group containing castor oil methyl ester and internally plasticized PVC was characterized with FT-IR and 1H NMR. Properties of internally plasticized PVC, including thermal stability, tensile tests and resistance to extraction in different solvents, was investigated. The results showed that alkynyl group containing castor oil methyl ester, as internal plasticizer of PVC, not only decreased the Tg of PVC from 84.6 °C to 41.6 °C efficiently, but also presented no plasticizer loss in five different solvents. The tensile tests showed that elongation at break and tensile strength of internally plasticized PVC was 353.8% and 18.1MPa. The internally plasticized PVC has potential application in replacing the traditional PVC material in PVC products with high durability.
[References]
  1. Zhou Y, Yang N, Hu S, Resour. Conserv. Recycl., 73, 33, 2013
  2. Qiu Z, Zhou P, RSC Adv., 4, 51411, 2014
  3. Jia P, Zhang M, Hu L, Zhou J, Feng G, Zhou Y, Polym. Degrad. Stabil., 121, 292, 2015
  4. Vieira MGA, da Silva MA, dos Santos LO, Beppu MM, Eur. Polym. J., 47, 254, 2011
  5. Rahman M, Brazel CS, Prog. Polym. Sci, 29, 1223, 2004
  6. Jia P, Zhang M, Hu L, Zhou Y, Korean J. Chem. Eng., 33(3), 1080, 2016
  7. Benjamin S, Masai E, Kamimura N, Takahashi K, Anderson RC, Faisal PA, J. Hazard. Mater., 340, 360, 2017
  8. Perez AL, Liong M, Plotkin K, Rickabaugh KP, Paustenbach DJ, Chemosphere, 167, 541, 2017
  9. Li JH, Ko YC, Kaohsiung J. Med. Sci., 28, S17, 2012
  10. Gani KM, Tyagi VK, Kazmi AA, Environ. Sci. Pollut. Res., 24, 17267, 2017
  11. Jia P, Zhang M, Hu L, Feng F, Bo C, Zhou Y, ACS. Sustain. Chem. Eng., 3, 2187, 2015
  12. Chen J, Li X, Wang Y, Li K, Huang J, Jiang J, Nie X, J. Taiwan Inst. Chem. E., 65, 488, 2016
  13. Jia P, Zhang M, Liu C, Hu L, Feng G, Bo C, Zhou Y, RSC Adv., 5, 41169, 2015
  14. Chieng BW, Ibrahim NA, Then YY, Loo YY, Polymers, 9, 204, 2017
  15. Arrieta MP, Samper MD, Jimenez-Lopez M, Aldas M, Lopez J, Ind. Crop. Prod., 99, 196, 2017
  16. Ang DTC, Khong YK, Gan SN, J. Vinyl. Addit. Techn., 22, 80, 2016
  17. Lee S, Park MS, Shin J, Kim YW, Polym. Degrad. Stabil., 147, 1, 2018
  18. Jia P, Hu L, Yang X, Zhang M, Shang Q, Zhou Y, RSC Adv., 7, 30101, 2017
  19. Jia P, Zhang M, Hu L, Song F, Feng G, Zhou Y, SCI REPUK, 8, 1589, 2018
  20. Jia P, Zhang M, Hu L, Wang R, Sun C, Zhou Y, Polymers, 9, 621, 2017
  21. Jia P, Hu L, Zhang M, Feng G, Zhou Y, Eur. Polym. J., 87, 209, 2017
  22. Navarro R, Perrino MP, Garcia C, Elvira C, Gallardo A, Reinecke H, Macromolecules, 49(6), 2224, 2016
  23. Lee KW, Chung JW, Kwak SY, Macromol. Rapid Commun., 37(24), 2045, 2016
  24. Choi J, Kwak SY, Environ. Sci. Technol., 41, 3763, 2007
  25. Yu BY, Chung JW, Kwak SY, Environ. Sci. Technol., 42, 7522, 2008
  26. Choi W, Chung JW, Kwak SY, ACS Appl. Mater. Interfaces, 6, 11118, 2014
  27. Liu C, Li J, Lei W, Zhou Y, Ind. Crop. Prod., 52, 329, 2014
  28. Zhang L, Zhang M, Zhou Y, Hu L, Polym. Degrad. Stabil., 98, 2784, 2013
  29. Jia P, Hu L, Zhang M, Zhou Y, J. Therm. Anal. Calorim., 124, 1331, 2016
  30. Jia P, Wang R, Hu L, Zhang M, Zhou Y, Pol. J. Chem. Technol., 19, 16, 2017
  31. Lafarge J, Kebir N, Schapman D, Gadenne V, Burel F, Cellulose, 20, 2779, 2013
  32. Kiskan B, Demiray G, Yagci Y, J. Polym. Sci. A: Polym. Chem., 46(11), 3512, 2008
  33. Qu HQ, Liu X, Xu JZ, Ma HY, Jiao YH, Xie JX, Ind. Eng. Chem. Res., 53(20), 8476, 2014
  34. Levchik SV, Weil ED, Polym. Adv. Technol., 15, 691, 2004
  35. Balabanovich AI, Zevaco TA, Schnabel W, Macromol. Mater. Eng., 289, 181, 2004
  36. Balabanovich AI, Thermochim. Acta, 435(2), 188, 2005