About The Journal
  Aims and Scope
  Editorial Board
  Submit a Manuscript 
  Subscription Information
  Guidelines for Publication
  Ethics
Articles & Issues
  Search
  Issue
  Online First
  KJChE on
For Authors
  Instructions to Authors
  Ethical Responsibilities of
  Authors in KJChE
  Ethics in Publishing
  Peer Review Process
  Author's Checklist
  Copyright Transfer Form
Contact us
 
 
 
Issue
Korean Journal of Chemical Engineering,
Vol.33, No.11, 3035-3049, 2016
Recent development in thermoplastic/wood composites and nanocomposites: A review
Borah JS, Kim DS
Thermoplastic composites filled with wood-base fillers have gained increasing attention, because compared to virgin polymers they have many advantages of light weight, high strength and stiffness, low cost, biodegradability and renewability. These advantages let them find a large dispersal in many areas of technical applications. However, poor interfacial interaction between hydrophilic wood-base fillers and hydrophobic polymer matrices should be improved to get reasonable physical properties for their wide applications. The interfacial interaction could be improved by addition of coupling agents and chemical modifications of wood-base fillers. To improve physical properties of the thermoplastic/wood composites, further nanofillers can be incorporated. This review summarizes recent developments in thermoplastic/wood composites and deals with wood-base fillers for thermoplastics, various interface modification methods and various thermoplastic/wood composites as well as nanocomposites. This review can provide reasonable future perspectives in this research area and stimulate development of new innovative thermoplastic/wood composites as well as nanocomposites.
Keywords: Thermoplastics; Wood; Interface Modification; Composites; Nanocomposites
[References]
  1. Clemons C, Forest Prod. J., 52, 10, 2002
  2. Ford M, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, WI, 199 (May 1999).
  3. Ashori A, Bioresour. Technol., 99(11), 4661, 2008
  4. Turku I, Karki T, J. Thermplast Comp. Mater., 27, 180, 2014
  5. Ismail H, Salmah A, Nasir M, Polym. Test, 20, 819, 2001
  6. Oksman K, Clemons C, J. Appl. Polym. Sci., 67(9), 1503, 1998
  7. Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451, 1998
  8. Stain MM, Kokta BV, Imbert C, Polym. Plast. Technol. Eng., 33, 89, 1994
  9. Felix JM, Gatenholm PJ, J. Appl. Polym. Sci., 50, 699, 1993
  10. Gauthier R, Joly C, Coupas A, Gauthier H, Escoubes M, Polym. Compos., 19, 287, 1998
  11. Park B, Kim DS, Polym. Korea, 35(2), 124, 2011
  12. Jang SY, Kim DS, Polym. Korea, 39(1), 130, 2015
  13. Seo YW, Kim DS, Polym. Korea, 38(3), 327, 2014
  14. Wang Y, Yeh FC, Lai SM, Chan HC, Shen HF, Polym. Eng. Sci., 43(4), 933, 2003
  15. Lai SM, Yeh FC, Wang Y, Chan HC, Shen HF, J. Appl. Polym. Sci., 87(3), 487, 2003
  16. Lu JZ, Wu QL, Negulescu II, J. Appl. Polym. Sci., 96(1), 93, 2005
  17. Gonzalez L, Rodriguez A, Debenito JL, Marcosfernandez A, J. Appl. Polym. Sci., 63(10), 1353, 1997
  18. Culler SR, Ishida H, Koenig JL, Polym. Compos., 7, 231, 1986
  19. Ricardo BS, Peter WH, Hasan J, Hou-min C, Bioresour. Technol., 8, 1456, 2013
  20. Kalia S, Kaushik VK, Sharma RK, J. Nat. Fibers, 8, 27, 2011
  21. Prasad N, Agarwal VK, Sinha S, Korean J. Chem. Eng., 32(12), 2534, 2015
  22. Valadez-Gonzalez A, Cervantes-Uc JM, Olayo R, Herrera-Franco PJ, Compos. Pt. B-Eng., 30, 321, 1999
  23. Poletto M, Zattera AJ, Forte MMC, Santana RMC, Bioresour. Technol., 109, 148, 2012
  24. Hetzer M, De Kee D, Chem. Eng. Res. Des., 86(10A), 1083, 2008
  25. Lundin T, Effect of Accelerated Weathering on the Physical and Mechanical Properties of Natural-Fiber Thermoplastic Composites, M. S. Thesis, University of Wisconsin-Madison (2001).
  26. Osswald TA, Menges G, Materials Science of Polymers for Engineers, Hanser Publishers, New York (1995).
  27. DeFosse M, Modern Plast., 80, 25, 2003
  28. Saheb DN, Jog JP, Adv. Polym. Technol., 18(4), 351, 1999
  29. Adler E, Wood Sci. Technol., 11, 169, 1977
  30. Eichhorn S, Baillie C, J. Mater., 6, 2107, 2001
  31. Kim EG, Kim BS, Kim DS, J. Appl. Polym. Sci., 103(2), 928, 2007
  32. Matuana LM, Polym. Compos., 19, 446, 1998
  33. Agrawal R, Saxena NS, Sharma KB, Thomas S, Sreekala MS, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 277, 77, 2000
  34. Weyenberg I, Ivens J, Coster A, Kino B, Baetens E, Verpoest I, Compos. Sci. Technol., 63, 1241, 2003
  35. Yim H, Kim DS, Polym. Adv. Technol., 23, 1441, 2012
  36. Paul A, Joseph K, Thomas S, Compos. Sci. Technol., 57, 67, 1997
  37. Joseph K, Thomas S, Pavithran C, Polymer, 37(23), 5139, 1996
  38. Sreekala MS, Kumaran MG, Joseph S, Jacob M, Thomas S, Appl. Compos. Mater., 7, 295, 2000
  39. Sreekala MS, Kumaran MG, Thomas S, Compos. Pt. A-Appl. Sci. Manuf., 33, 763, 2002
  40. Harnnarongchai W, Kaschta J, Schubert DW, Sombatsompop N, Polym. Compos., 33, 2084, 2012
  41. Rong MZ, Zhang MQ, Liu Y, Yang GC, Zeng HM, Compos. Sci. Technol., 61, 1437, 2001
  42. Yakubu A, Gabriel AO, Cheku M, Paul AM, Int. J. Carbohydrat. Chem., ID 141034, 2013
  43. Peydecastaing J, Girardeau S, Vaca-Garcia C, Borredon M, Cellulose, 13, 95, 2006
  44. Freire CSR, Silvestre AJD, Neto CP, Belgacem MN, Gandini A, J. Appl. Polym. Sci., 100(2), 1093, 2006
  45. Dong X, Dong Y, Jiang M, Wang L, Tong J, Zhou J, Ind. Crop. Prod., 46, 301, 2013
  46. Shang W, Huang J, Luo H, Chang PR, Feng J, Xie G, Cellulose, 20, 179, 2013
  47. Dankovchi TA, Hsieh YL, Cellulose, 14, 469, 2007
  48. Jang SY, Kim DS, J. Appl. Polym. Sci., 144, 42929, 2016
  49. Zafeiropoulos NE, Compos. Pt. A-Appl. Sci. Manuf., 33, 1083, 2002
  50. Gregorova A, Wimmer R, Hrabalova M, Koller M, Ters T, Mundigler N, Holzforschung, 63, 565, 2009
  51. Bledzki AK, Sperber VE, Proc. Fifth Int. Conf. on Wood fiber-Plast. Compos., Forest Prod. Soc., Madison, Wis., 187 (May 1999).
  52. Rowell RM, Hand Book of Wood Chemistry and Wood Composites, CRC Press, London (2012).
  53. Faruk O, Saini M, Biofiber Reinforcements in Composite Materials, Woodhead Publishing, Elsevier, U.K. (2014).
  54. Bledzki AK, Reihmane S, Gassan J, Polym. Plast. Technol. Eng., 37, 451, 1998
  55. Balasuriya PW, Ye L, Mai YW, Wu J, J. Appl. Polym. Sci., 83(12), 2505, 2002
  56. Kim JP, Yoon TH, Mun SP, Rhee JM, Lee JS, Bioresour. Technol., 97(3), 494, 2006
  57. Adhikary KB, Pang S, Staiger MP, Compos. B: Eng., 39, 807, 2008
  58. Nourbakhsh A, Ashori A, J. Compos. Mat., 43, 877, 2009
  59. Ndlovu SS, Reenen AJ, Luyt AS, Compos. Pt. A-Appl. Sci. Manuf., 51, 80, 2013
  60. Rodriguez-Llamazares S, Zuniga A, Castano J, Radovic LR, J. Appl. Polym. Sci., 122(3), 1731, 2011
  61. Tisserat B, Reifschneider L, Joshee N, Finkenstadt VL, BioResour., 8, 4440, 2013
  62. Sewda K, Maiti SN, Polym. Bull., 70(10), 2657, 2013
  63. Hanif MPM, Supri AG, Firuz Z, Appl. Mech. Mat., 679, 132, 2014
  64. Bengtsson M, Gatenholm P, Oksman K, Compos. Sci. Technol., 65, 1468, 2005
  65. AlMaadeed MA, Nogellova Z, Micusik M, Novak I, Krupa I, Mater. Des., 53, 29, 2014
  66. Mirmehdi SM, Zeinaly F, Dabbagh F, Compos. B: Eng., 56, 137, 2014
  67. Cui Y, Lee S, Noruziaan B, Cheung M, Tao J, Compos. Pt. A-Appl. Sci. Manuf., 39, 655, 2008
  68. Geng Y, Li K, Simonsen J, J. Appl. Polym. Sci., 91, 3667, 2004
  69. Selke SE, Wichman I, Compos. Pt. A-Appl. Sci. Manuf., 35, 321, 2004
  70. Atuanya CU, Ibhadode AOA, Igboanugo AC, Tribology Indust., 33, 11, 2011
  71. Marcovich NE, Villar MA, J. Appl. Polym. Sci., 90(10), 2775, 2003
  72. Raj RG, Kokta BV, Maldas D, Daneault C, Polym. Compos., 9, 404, 1988
  73. Hong H, Liao H, Zhang H, He H, Liu T, Jia D, Compos. Pt. A-Appl. Sci. Manuf., 64, 90, 2014
  74. Li B, He J, Polym. Degrad. Stabil., 83, 241, 2004
  75. Pan M, Mei C, Song Y, BioResour., 7, 1760, 2012
  76. Stark NM, White RH, Mueller SA, Osswald TA, Polym. Degrad. Stabil., 95, 1903, 2010
  77. Stark NM, Matuana LM, J. Appl. Polym. Sci., 90(10), 2609, 2003
  78. Stark NM, Matuana LM, Clemons CM, J. Appl. Polym. Sci., 93(3), 1021, 2004
  79. Kuan CF, Kuan HC, Ma CCM, Huang CM, Compos. Pt. A-Appl. Sci. Manuf., 37, 1696, 2006
  80. Yuan Q, Wu D, Gotama J, Bateman S, J. Thermoplast. Compos. Mater., 21, 195, 2008
  81. Coutinho FM, Costa TH, Carvalho DL, J. Appl. Polym. Sci., 65(6), 1227, 1997
  82. Zaini WIJ, Ismail MYAE, Mansor MS, Mustafah J, Polym. Int., 40, 51, 1996
  83. Perez E, Fama L, Pardo SG, Abad MJ, Bernal C, Compos. B:Eng., 43, 2795, 2012
  84. Bledzki AK, Faruk O, Appl. Compos. Mater., 10, 365, 2003
  85. Thumm A, Dickson AR, Compos. Pt. A-Appl. Sci. Manuf., 46, 45, 2013
  86. Nunez AJ, Sturm PC, Kenny JM, Aranguren MI, Marcovich NE, Reboredo MM, J. Appl. Polym. Sci., 88(6), 1420, 2003
  87. Sombatsompop N, Yotinwattanakumtorn C, Thongpin C, J. Appl. Polym. Sci., 97(2), 475, 2005
  88. Correa CA, Razzino CA, Hage E, J. Thermoplast. Compos. Mater., 20, 323, 2007
  89. Ichazo MN, Albano C, Gonzalez J, Perera R, Candal MV, Compos. Struct., 54, 207, 2001
  90. Karmarkar A, Chauhan SS, Modak JM, Chanda M, Compos. Pt. A-Appl. Sci. Manuf., 38, 227, 2007
  91. Nachtigall SMB, Cerveira GS, Rosa SML, Polym. Test, 26, 619, 2007
  92. Dominkovics Z, Danyadi L, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 38, 1893, 2007
  93. Danyadi L, Janecska T, Szabo Z, Nagy G, Moczo J, Pukanszky B, Compos. Sci. Technol., 67, 2838, 2007
  94. Bouza R, Lasagabaster A, Abad MJ, Barral L, J. Appl. Polym. Sci., 109(2), 1197, 2008
  95. Gwon JG, Lee SY, Chun SJ, Doh GH, Kim JH, Korean J. Chem. Eng., 27(2), 651, 2010
  96. Xie Y, Krause A, Militz H, Steuernagel L, Mai C, Compos. Pt. A-Appl. Sci. Manuf., 44, 32, 2013
  97. Poletto M, Zattera AJ, Santana RMC, Polym. Compos., 35, 1935, 2014
  98. Malakani M, Bazyar B, Talaiepour M, Hemmasi AH, Ghasemi I, BioResour., 10, 2113, 2015
  99. Chatree H, Thanate R, Wiriya T, J. Thermoplast. Compos. Mater., 28, 179, 2015
  100. Hristov VN, Krumova M, Vasileva S, Michler GH, J. Appl. Polym. Sci., 92(2), 1286, 2004
  101. Hristov N, Lach R, Grellmann W, Polym. Test, 23, 581, 2004
  102. Hristov VN, Vasileva S, Polym. Compos., 25, 521, 2004
  103. Danyadi L, Moczo J, Pukanszky B, Compos. Pt. A-Appl. Sci. Manuf., 41, 199, 2010
  104. Rimdusit S, Wongsongyot S, Jittarom S, Suwanmala P, Tiptipakorn S, J. Polym. Res., 18, 801, 2011
  105. Stark N, J. Thermoplast. Compos. Mater., 14, 421, 2001
  106. Lin QF, Zhou XD, Dai G, J. Appl. Polym. Sci., 85(14), 2824, 2002
  107. Bledzki AK, Faruk O, Compos. Sci. Technol., 64, 693, 2004
  108. Mishra S, Verma J, J. Appl. Polym. Sci., 101(4), 2530, 2006
  109. Borysiak S, Paukszta D, Helwig M, Polym. Degrad. Stabil., 91, 3339, 2006
  110. Borysiak S, J. Therm. Anal. Calorim., 119, 1955, 2015
  111. Arao Y, Nakamura S, Tomita Y, Takakuwa K, Umemura T, Tanaka T, Polym. Degrad. Stabil., 100, 79, 2014
  112. Guan YH, Liao W, Xu ZZ, Chen MJ, Huang JQ, Wang YZ, RSC Adv., 5, 59865, 2015
  113. Jiang H, Kamdem DP, J. Vinyl Addit. Technol., 10, 59, 2004
  114. Rocha N, Kazlauciunas A, Gil MH, Goncalves PM, Guthrie JT, Compos. Pt. A-Appl. Sci. Manuf., 40, 653, 2009
  115. Ashori A, Kiani H, Mozaffari SA, J. Appl. Polym. Sci., 120(3), 1788, 2011
  116. Joshi PS, Marathe DS, J. Reinforc. Plast. Compos., 29, 2522, 2010
  117. Thanate R, Panuk L, Songpol U, J. Thermoplast. Compos. Mater., 27, 719, 2014
  118. Kociszewski M, Gozdecki C, Wilczynski A, Zajchowski S, Mirowski J, Eur. J. Wood Prod., 70, 113, 2012
  119. Petchwattana N, Covavisaruch S, J. Bionic Eng., 10, 110, 2013
  120. Shah BL, Matuana LM, J. Vinyl Addit. Technol., 11, 160, 2005
  121. Xu K, Li K, Zhong T, Guan L, Xie C, Li S, Compos. B: Eng., 58, 392, 2014
  122. Muller M, Militz H, Krause A, Polym. Degrad. Stabil., 97, 166, 2012
  123. Muller M, Radovanovic I, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 125(1), 308, 2012
  124. Muller M, Gruneberg T, Militz H, Krause A, J. Appl. Polym. Sci., 124(6), 4542, 2012
  125. Muller M, Gellerich A, Militz H, Krause A, Eur. J. Wood Prod., 71, 199, 2013
  126. Zhu D, Sheng Y, Liu X, Chen Q, J. Reinforc. Plast. Compos., 31, 1025, 2012
  127. Zhang X, Zhang Y, Jin D, Zhu M, Wu Q, J. Biobased Mat. Bioenergy, 9, 155, 2015
  128. Valle GCX, Tavares MIB, Luetkmeyer L, Stael GC, Macromol. Symp., 258, 113, 2007
  129. Jiang HH, Kamdem DP, J. Appl. Polym. Sci., 107(2), 951, 2008
  130. Fang Y, Wang Q, Bai X, Wang W, Cooper PA, J. Therm. Anal. Calorim., 109, 1577, 2012
  131. Pilarski JM, Matuana LM, J. Vinyl Addit. Technol., 11, 1, 2005
  132. Fabiyi JS, McDonald AG, J. Rein. Plast. Compos., 32, 547, 2012
  133. Chaochanchaikul K, Rosarpitak V, Sombatsompop N, eXP. Polym. Let., 7, 146, 2013
  134. Kositchaiyong A, Rosarpitak V, Prapagdee B, Sombatsompop N, Compos. B: Eng., 53, 25, 2013
  135. Kositchaiyong A, Rosarpitak V, Hamada H, Sombatsompop N, Int. Biodeter. Biodegrad., 91, 128, 2014
  136. Maldas D, Kokta BV, Raj RG, Daneault C, Polymer, 29, 1255, 1988
  137. Maldas D, Kokta BV, J. Appl. Polym. Sci., 41, 185, 1990
  138. Maldas D, Kokta BV, J. Appl. Polym. Sci., 40, 917, 1990
  139. Maldas D, Kokta BV, Polym. Eng. Sci., 31, 1351, 1991
  140. Maldas D, Kokta BV, J. Adhes. Sci. Technol., 3, 529, 2012
  141. Poletto M, Zeni M, Zattera AJ, J. Thermoplast. Compos. Mater., 1, 1, 2011
  142. Poletto M, Dettenborn J, Zeni M, Zattera AJ, Waste Manage., 31, 779, 2011
  143. Lisperguer J, Bustos X, Saravia Y, J. Appl. Polym. Sci., 119(1), 443, 2011
  144. Huda MS, Drzal LT, Misra M, Mohanty AK, J. Appl. Polym. Sci., 102(5), 4856, 2006
  145. Takatani M, Ikeda K, Sakamoto K, Okamoto T, J. Wood Sci., 54, 54, 2008
  146. Petinakis E, Yu L, Edward G, Dean K, Liu H, Scully AD, J. Polym. Environ., 17, 83, 2009
  147. Dikobe DG, Luyt AS, J. Appl. Polym. Sci., 104(5), 3206, 2007
  148. Rahman KS, Islam MN, Rahman MM, Hannan MO, Dungani R, Khalil HPSA, SpringerPlus, 2, 629, 2013
  149. Kord B, Hooman A, Ghasemi HI, Wood Sci. Technol., 45, 111, 2011
  150. Zhao Y, Wang K, Zhu F, Xue P, Jia M, Polym. Degrad. Stabil., 91, 2874, 2006
  151. Deka BK, Mandal M, Maji TK, J. Reinf. Plast. Compos., 31, 657, 2012
  152. Lee H, Kim DS, J. Appl. Polym. Sci., 111(6), 2769, 2009
  153. Islam MS, Ahmad MB, Hasan M, Aziz SA, Jawaid M, Haafiz MKM, Zakaria SAH, BioResour., 10, 1394, 2015
  154. Tabari HZ, Danesh MA, Pia RH, Nourbakhsh A, Int. Conf. Nanotechnol. Biosensors, 2, 20, 2011
  155. Yeh SK, Gupta RK, Polym. Eng. Sci., 50(10), 2013, 2010
  156. Lee YH, Kuboki T, Park CB, Sain M, Kontopoulou M, J. Appl. Polym. Sci., 118(1), 452, 2010
  157. Sheshmani S, Ashori A, Hamzeh Y, J. Appl. Polym. Sci., 118(6), 3255, 2010
  158. Khanjanzadeh H, Pirayesh H, Salari A, Eur. J. Wood Prod., 71, 211, 2013
  159. Lee YH, Kuboki T, Park CB, Sail M, Polym. Eng. Sci., 51(5), 1014, 2011
  160. Faruk O, Matuana LM, Compos. Sci. Technol., 68, 2073, 2008
  161. Faruk O, Matuana LM, J. Vinyl Addtv. Technol., 14, 60, 2008
  162. Fu SY, Song PA, Yang HT, Jin YM, Lu FZ, Ye JW, Wu Q, J. Mater. Sci., 45(13), 3520, 2010
  163. Kordkheili HY, Farsi M, Rezazadeh Z, Compos. B: Eng., 44, 750, 2013
  164. Tabar MM, Tabarsa T, Mashkour M, Khazaeian A, J. Indian Academy Wood Sci., 12, 15, 2015
  165. Zhang ZX, Zhang J, Lu BX, Xin ZX, Kang CK, Kim JK, Compos. B: Eng., 43, 150, 2012
  166. Deka BK, Maji TK, Compos. Pt. A-Appl. Sci. Manuf., 42, 2117, 2011
  167. Deka BK, Maji TK, Polym. Eng. Sci., 6, 1, 2012
  168. Deka BK, Maji TK, Compos. Sci. Technol., 70, 1755, 2010
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.