|
Korean Journal of Chemical Engineering, Vol.31, No.12, 2286-2290, 2014
One-pot synthesis of 5-hydroxymethylfurfural directly from cottonseed hull biomass using chromium (III) chloride in ionic liquid
We studied the direct synthesis of 5-hydroxymethylfurfural (5-HMF) from cottonseed hull biomass under acid condition in one-pot. The influence of HCl dosage, reaction temperature and time, CrCl3·6H2O amount, and cottonseed hull loading on the yield of 5-HMF was investigated. As a result, a 5-HMF yield up to 51% was obtained using 1-butyl-3-methylimidazolium chloride ([Bmim]Cl) catalyzed with chromium (III) chloride at 130 ℃ for 2 h. The [Bmim]Cl/
CrCl3·6H2O/HCl system was found to have high activity and selectivity for the dehydration of cellulose into 5-hydroxymethylfurfural. This work provides a low cost, environment-friendly and energy-efficient process to directly convert raw biomass into bio-fuels and chemicals.
[References]
- Black M, Miller R, J. Chem. Technol. Biotechnol., 81(11), 1725, 2006
- Corma A, Iborra S, Velty A, Chem. Rev., 107(6), 2411, 2007
- Rostrup-Nielsen J, Science, 308, 1421, 2005
- Chun JA, Lee JW, Yi YB, Hong SS, Chung CH, Korean J. Chem. Eng., 3, 930, 2010
- Chang C, Cen PL, Ma XJ, Bioresour. Technol., 98(7), 1448, 2007
- Li CZ, Zhang ZH, Zhao ZK, Tetrahedron Lett., 50, 5403, 2009
- Roman-Leshkov Y, Barrett CJ, Liu ZY, Dumesic JA, Nature, 447, 982, 2007
- Zakrzewska ME, Bogel-Lukasik E, Bogel-Lukasik R, Chem. Rev., 111(2), 397, 2011
- Zhao HB, Holladay JE, Brown H, Zhang ZC, Science, 316, 1597, 2007
- Jadhav H, Taarning E, Pedersen CM, Bols M, Tetrahedron Lett., 53, 983, 2012
- Tian J, Wang JH, Zhao S, Jiang CY, Zhang X, Wang XH, Cellulose, 17, 587, 2010
- Wang P, Yu HB, Zhan SH, Wang SQ, Bioresour. Technol., 102(5), 4179, 2011
- Liu B, Zhang ZH, Zhao ZK, Chem. Eng. J., 215, 517, 2013
- Lin Y, Tanaka S, Appl. Microbiol. Biotechnol., 69(6), 627, 2006
- Li XJ, Pang YZ, Zhang RH, Bioresour. Technol., 80(2), 157, 2001
- Cheng HN, Dowd MK, Selling GW, Biswas A, Carbohydr. Polym., 80, 449, 2010
- Zhou Q, Gong WQ, Xie CX, Yang DJ, Ling XQ, Yuan X, Chen SH, Liu XF, J. Hazard. Mater., 185, 502, 2011
- Estrada AER, Royse DJ, Bioresour. Technol., 98(10), 1898, 2007
- Hu L, Sun Y, Lin L, Ind. Eng. Chem. Res., 51(3), 1099, 2012
- Burrell AK, Del Sesto RE, Baker SN, McCleskey TM, Baker GA, Green Chem., 9, 449, 2007
- Ververis C, Georghiou K, Danielidis D, Hatzinikolaou DG, Santas P, Santas R, Corleti V, Bioresour. Technol., 98(2), 296, 2007
- Yi YB, Lee JW, Hong SS, Choi YH, Chung CH, J. Ind. Eng. Chem., 17(1), 6, 2011
- Hsu WH, Lee YY, Peng WH, Wu KCW, Catal. Today, 174(1), 65, 2011
- Zhang LX, Yu HB, Wang P, Dong H, Peng XH, Bioresour. Technol., 130, 110, 2013
- Sharam GD, Phys. Status Solidi A-Appl. Res., 158, 599, 1996
- Yemis O, Mazza G, Bioresour. Technol., 102, 7371, 2013
- Chen T, Chidambaram M, Lin ZP, Smit B, Bell AT, J. Phys. Chem. B, 114(17), 5790, 2010
- Tong XL, Ma Y, Li YD, Carbohydr. Res., 345, 1698, 2010
- Zhou LL, Liang RJ, Ma ZW, Wu TH, Wu Y, Bioresour. Technol., 129, 450, 2013
- Zhang YY, Deng JH, Shan YH, Zhou YS, Wang GM, Li MS, J. Chem. Eng. Chin. Univ., 24, 824, 2010
- Yang FL, Liu QS, Bai XF, Du YG, Bioresour. Technol., 102(3), 3424, 2011
- Qi XH, Watanabe M, Aida TM, Smith RL, ChemSusChem, 3, 1071, 2010
[Cited By]
- You SJ, Park ED, Park MJ, Korean Journal of Chemical Engineering, 33(3), 806, 2016
- Esmaeili N, Zohuriaan-Mehr MJ, Bouhendi H, Bagheri-Marandi G, Korean Journal of Chemical Engineering, 33(6), 1964, 2016
|