Issue
Korean Journal of Chemical Engineering,
Vol.30, No.3, 563-573, 2013
Computational fluid dynamics simulation of multiphase flow in packed sieve tray of distillation column
Computational fluid dynamic models (CFD) have been used for the description of hydraulic characteristics of packed sieve tray (PST). PST is a conventional sieve tray combined with a slice thickness of packing on the tray deck. Eulerian-Eulerian framework has been used to solve the equations of both liquid and gas phases assumed as two interpenetrating phases. A commercial scaled sieve tray has been simulated based on a three-dimensional unsteady state model. Comparison with experimental data proves good agreement for the simulation results under the studied conditions. Effects of the packing on the liquid velocity distribution, clear liquid height and vertical liquid volume fraction distribution have been investigated. The simulation results show that 3.08 cm of packing thickness could increase the clear liquid height up to 17 percent and froth height up to 10 percent as well as promoting froth density by 6 percent with the only drawback of increasing wet pressure drop up to 16 percent in froth regime.
[References]
  1. Spagnoloand DA, Chuang KT, Ind. Eng. Chem. Pro. Des.Dev., 23, 561, 1984
  2. Chen GX, Afacan A, Xu C, Chuang KT, Can. J. Chem. Eng., 68, 382, 1990
  3. Chen GX, Chuang KT, Chien C, Ye Y, Gas Sep. Pur., 6, 207, 1992
  4. Chen GX, Predicting and improving sieve tray efficiency sieve tray efficiencies in distillation, Ph. Thesis, University of Alberta, 1993
  5. Salem ABSH, Sep. Sci. Technol., 28, 2255, 1993
  6. Mehta B, Chuang KT, Nandakumar K, Chem. Eng. Res. Des., 76, 834, 1998
  7. Mehta B, Model for liquid phase flow on sieve trays, Msc. Thesis, University of Alberta, 1997
  8. Fischer CH, Quarini JL, Three-dimensional heterogeneous modeling of distillation tray hydraulics, AIChE Meeting, Miami Beach, USA, 1998
  9. Liu CJ, Yuan XG, Yu KT, Zhu XJ, Chem. Eng. Sci., 55(12), 2287, 2000
  10. Van Baten JM, Krishna R, Chem. Eng., 77, 143, 2000
  11. Bennett DL, Agrawal R, Cook PJ, AIChE J., 29, 434, 1983
  12. Gesit G, Nandakumar K, Chuang KT, AIChE J., 49(4), 910, 2003
  13. Colwell CJ, Ind. Eng. Chem. Pro. Des. Dev., 20, 298, 1981
  14. Teleken JG, Werle LO, Parisotto IGB, Marangoni C, Meneguelo AP, Ricardo, Machado AF, Fluid-dynamics study of multiphase flow in a sieve tray of a distillation column, 20th European Symposium on Compute Aided Process Engineering-ESCAPE20, 2010
  15. Zarei T, Rahimi R, Zivdar M, Korean J. Chem. Eng., 26(5), 1213, 2009
  16. Alizadehdakhel A, Rahimi M, Alsairafi AA, Korean J. Chem. Eng., 26(2), 475, 2009
  17. Li XG, Liu DX, Xu SM, Li H, Chem. Eng. Process., 48(1), 145, 2009
  18. Olujic Z, Jodecke M, Shilkin A, Schuch G, Kaibel B, Chem. Eng. Process., 48(6), 1089, 2009
  19. Rahimi R, Abbaspour D, Chem. Eng. Process., 47(9-10), 1504, 2008
  20. Yin F, Liquid maldistribution and mass transfer efficiency in randomly packed distillation column, Ph. Thesis, University of Alberta, 1999
  21. Kister HZ, Distillation Design, McGraw-Hill, New York, 1992
  22. Yin FH, Wang ZC, Afacan A, Nandakumar K, Chuang KT, Can. J. Chem. Eng., 78(3), 449, 2000
  23. Lockett MJ, Distillation tray fundamental, Cambridge University Press, Cambridge, 1968
  24. Solari B, Bell RL, AIChE J., 32, 640, 1986
  25. Kachur JP, Afacan A, Chuang KT, Chem. Eng. Res. Des., 82(7), 813, 2004