| Issue |
Korean Journal of Chemical Engineering
|
| 2035-2045 |
Removal of pollutants from wastewater using alumina based nanomaterials: A review Ramakrishna Mahesh, Khushi Vora, Madhu Hanumanthaiah, Anuradha Shroff, Pavan Kulkarni, Sridharan Makuteswaran, Suresh Ramdas, Hemanth Lakshmipura Ramachandraih, Anjanapura Venkatarmanaiah Raghu |
| 2046-2059 |
Current progress on gold recovery from refractory ore and waste electrical and electronic equipment Xuran Ji, Zhijie Shen, Wenping Xu, Shimiao Yao, Hairong Zhang, Lian Xiong, Hailong Li, Haijun Guo, Xuefang Chen, Xinde Chen |
| 2060-2081 |
Wastewater from the textile industry: Review of the technologies for wastewater treatment and reuse Ali Ahsan, Farrukh Jamil, Moeen Ali Rashad, Murid Hussain, Abrar Inayat, Parveen Akhter, Ala’a H. Al-Muhtaseb, Kun-Yi Andrew Lin, YoungKwon Park |
| 2082-2086 |
Synthesis of an antibiotic-preserving antimicrobial tetracycline-loaded gellan gum gel Gokul Paramasivam, Duraisami Dhamodharan, Somasundaram Chandra Kishore, Hun-Soo Byun |
| 2087-2090 |
Synthesis of graphitic carbon from Pisum sativum for supercapacitor applications Pranoti H. Patil, Suchitra B. Ravan, Saurabh S. Thoravat, Tukaram D. Dongale, Sushilkumar A. Jadhav |
| 2091-2101 |
An LSTM model with optimal feature selection for predictions of tensile behavior and tensile failure of polymer matrix composites Jaewook Lee, Nagyeong Lee, Jinkyung Son, Dongil Shin |
| 2102-2118 |
Activated carbon from municipal waste for enhanced CO2/CH4 membrane separation: Experimental, modeling and simulation Abolfazl Jomekian, Bahamin Bazooyar |
| 2119-2127 |
Physics-informed neural networks for learning fluid flows with symmetry Younghyeon Kim, Hyungyeol Kwak, Jaewook Nam |
| 2128-2137 |
Criteria for evaluating working fluids in loop gravity-assisted heat systems Jianxun Chen, Jinping Liu, Xiongwen Xu, Lingjiao Liang, Yinhao Yu |
| 2138-2148 |
Gas transport characteristics of mixed matrix membrane containing MIL-100 (Fe) metal-organic frameworks and PEBAX precursors Vahid Pirouzfar, Narges Roustaie, Chia-Hung Su |
| 2149-2158 |
Hydrogenation of dimethyl 2,5-furandicarboxylate to dimethyl tetrahydrofuran-2,5-dicarboxylate over Ru/HY Chengfeng Li, Qishen Lyu, Zheng Li, Shuliang Yang, Yong Sun, Xing Tang, Xianhai Zeng, Lu Lin |
| 2159-2164 |
Synthesis of stabilizer-free small PdAg alloy nanoparticles supported on carbon using a continuous Couette-Taylor reactor with enhanced electrochemical activity toward ethanol oxidation reaction Pengfei Jiang, Jiyu Hyun, Hyun Su Park, Suk Ho Bhang, Woo-Sik Kim, Taekyung Yu |
| 2165-2173 |
Electrochemical property based on the structural control of pitch-based carbon anode Jin Ung Hwang, Ji Sun Im, Jong Dae Lee |
| 2174-2186 |
Hydrogen production by catalytic steam reforming of waste cooking oil over La-Ni/ZSM-5 catalyst Na Xiao, Rui Zhao, Yufei Liu, Wei Zhan, Yonghui Xu, Zhengshun Wu |
| 2187-2198 |
Anticorrosive efficiency and adsorption characteristics of natural plant gums on mild steel exposed to the Diesel/Saline water biphasic system Raji Palanisamy, Jayapriya Jayaprakash, Duraisami Dhamodharan, Hun-Soo Byun |
| 2199-2208 |
Surface modification of petroleum residue-activated carbon using citric acid for enhanced cobalt removal from an aqueous solution Jong-Soo Choi, Choong Jeon, Suk Soon Choi |
| 2209-2218 |
Photoelectrocatalysis performance of Se doped-TiO2/Ti nanotube arrays for visible-light-driven degradation of diazinon pesticide Muhammad Nurdin, Abdul Haris Watoni, Muhammad Natsir, Sarifa Rahmatilah, Maulidiyah Maulidiyah, Dwiprayogo Wibowo, La Ode Agus Salim, Siti Naqiyah Sadikin, Catherina Manukpadang Bijang, Akrajas Ali Umar |
| 2219-2238 |
Rhodamine B dye degradation by fabricated Ti/RuO2 anode: Optimization by RSM, reaction mechanism, study of sludge Monica Ranga, Shishir Sinha, Pinakshi Biswas |
| 2239-2252 |
Low-temperature synthesis and characterization of porous chromium terephthalate MIL-101(Cr) and its photocatalytic degradation of phenanthrene Usman Abubakar Adamu, Noor Hana Hanif Abu Bakar, Zakariyya Uba Zango, Nonni Soraya Sambudi, Anwar Iqbal, Mohd Hazwan Hussin, Tuan Sherwyn Hamidon |
| 2253-2262 |
Removal of free fatty acid from waste cooking oil using an adsorbent derived from cassava peels Amnat Phetrungnapha, Nalinnipa Wiengnak, Kamol Maikrang |
| 2263-2270 |
Immobilization of commercial acid phosphatases from wheat germ and potato onto ion exchangers Frederico Alves Lima, Pedro Alves Martins, Wilson Galvão de Morais Júnior, Eloízio Júlio Ribeiro, José Manuel Guisán, Miriam Maria de Resende |
| 2271-2281 |
Experimental study of cured dust layer structure parameters based on semantic segmentation Bin Li, Zhongli Ji, Junfeng Mu, Yulin Ren, Zhen Liu |
| 2282-2292 |
Carbon dioxide absorption by Ammonia-promoted aqueous triethanolamine solution in a packed bed Hamed Rashidi, Hossein Azimi, Parvaneh Rasouli |
| 2293-2302 |
Thermophysical properties of N-isopropyl-2-propanamine+alkanol (C1-C3) mixtures as absorbents for carbon dioxide capture Sweety Verma, Payal Bhagat, Suman Gahlyan, Manju Rani, Naveen Kumar, Rajesh Kumar Malik, Yongjin Lee, Sanjeev Maken |
| 2303-2311 |
Designing CuSe-gCN nanocomposite as an active electrocatalyst for water oxidation Fatemah Farraj Alharbi, Zahoor Ahmad, Adeel Hussain Chughtai, Rabia Yasmin Khosa, Hafiz Muhammad Tahir Farid |
| 2312-2320 |
Correlation and thermal conductivity sensitivity analysis of ternary hybrid nanofluids containing CuO and TiO2 nanoparticles and multi-walled carbon nanotubes Mohammad Hemmat Esfe, Soheyl Alidoust, Davood Toghraie |
| 2321-2333 |
Visibly transparent UV protection and adjusted mechanical properties of films composed of lignin-derived wastes and poly[(R)-3-hydroxybutyric acid] Aliaksandr Karnitski, Jae-Wook Choi, Heesuk Kim, Chun-Jae Yoo, Hyunjoo Lee, Dong Jin Suh, Kwang Ho Kim, Changsoo Kim, Kyeongsu Kim, Jeong-Myeong Ha |
| 2334-2341 |
Automated paint coating using two consecutive images with CNN regression Byoung Chul Kim, Jin Whan Park, Young Han Kim |
| 2342-2355 |
Bio-based composite as phase change material including spent coffee grounds and beeswax paraffin Moez Souissi, Abdelwaheb Trigui, Ilyes Jedidi, Mohamed Sahbi Loukil, Makki Abdelmouleh |
| 2356-2364 |
Synthesis and characterization of epoxy resin-based ion-imprinted polymer for selective removal of copper ions Sining Zhu, Haitao Wan, Zhibo Yan, Chen Xi, Yuzhuo Zhang, Fan Zhang |
