|
Korean Journal of Chemical Engineering, Vol.29, No.3, 304-309, 2012
Intrinsic kinetics of the Fischer-Tropsch synthesis over an impregnated cobalt-potassium catalyst
The optimal amount of 15 wt%Co/10 wt%K/Al2O3 catalyst was prepared using the impregnation technique in order to study the kinetics of the Fischer-Tropsch synthesis. The rate of synthesis was measured in a fixed-bed micro reactor with H2/CO feed ratio of 1-3 and space velocity in the range of 2,700-5,200 h^(-1) under reactor pressure of 8 bar and a temperature range of 210-240℃ . The experimental data were best fitted by a Langmuir-Hinshelwood-Hougen-Watson (LHHW) approach rate in the form of -rCO=(k2K1PCOPH2)/(1+K1PCO). Furthermore, the data were fitted fairly well by a power law equation in the form of -rCO=kPCO 1.32PH21.42. The activation energies for LHHW approach model and power law equation were obtained as 138.5 kJ/mol and 87.39 kJ/mol, respectively.
[References]
- van der Laan GP, Beenackers AACM, Appl. Catal. A: Gen., 193(1-2), 39, 2000
- Song HS, Ramkrishna D, Trinh S, Wright H, Korean J. Chem. Eng., 21(2), 308, 2004
- Rofer-Depoorter CK, Chem. Rev., 81, 447, 1981
- Kim CU, Kim YS, Chae HJ, Jeong KE, Jeong SY, Jun KW, Lee KY, Korean J. Chem. Eng., 27(3), 777, 2010
- Kim YH, Hwang DY, Song SH, Lee SB, Park ED, Park MJ, Korean J. Chem. Eng., 26(6), 1591, 2009
- Pour AN, Zamani Y, Tavasoli A, Shahri SMK, Taheri SA, Fuel., 87, 2004, 2008
- Jeon JK, Kim CJ, Park YK, Ihm SK, Korean J. Chem. Eng., 21(2), 365, 2004
- Pour AN, Shahri SMK, Bozorgzadeh HR, Zamani Y, Tavasoli A, Marvast MA, Appl. Catal. A: Gen., 348(2), 201, 2008
- Yang Y, Xiang HW, Xu YY, Bai L, Li YW, Appl. Catal. A: Gen., 266(2), 181, 2004
- Raje AP, O'Brien RJ, Davis BH, J. Catal., 180(1), 36, 1998
- Iglesia E, Reyes SC, Soled SL, in: Computer-Aided Design of Catalysts, E. R. Becker, et al. Eds., Dekker, New York, 1993
- Sarup B, Wojciechowski BW, Can. J. Chem. Eng., 74, 62, 1989
- Yates IC, Sattereld CN, Energy and Fuels., 5, 168, 1991
- Yang CH, Massoth FE, Oblad AG, Adv. Chem. Ser., 178, 35, 1979
- Anderson RB, in: Catalysis, Emmett PH Ed., Reinhold, New York, 1956
- Brotz W, Z. Elektrochem., 5, 301, 1949
- Botes FG, van Dyk B, McGregor C, Ind. Eng. Chem. Res., 48(23), 10439, 2009
- Irankhah A, Haghtalab A, Farahani EV, Sadaghianizadeh K, J. Nat. Gas Chem., 16, 115, 2007
- Zennaro R, Tagliabue M, Bartholomew CH, Catal. Today, 58(4), 309, 2000
- Herington EFG, Chem. Ind., 65, 346, 1946
- Lox ES, Marin GB, De Graeve E, Bussier P, Appl. Catal. A., 40, 197, 1988
- Van der Laan GP, Beenackers AACM, Catal. Rev.-Sci. Eng., 41(3-4), 255, 1999
- Wang YN, Ma WP, Lu YJ, Yang J, Xu YY, Xiang HW, Zha YL, Zhang BJ, Fuel., 82, 195, 2003
- Mears DE, in: Chemical Reaction Engineering II, H. M. Hulburt Ed., ACS Monograph, Washington, 1974
- Mollavali M, Yaripour F, Atashi H, Sahebdelfar S, Ind. Eng. Chem. Res., 47(9), 3265, 2008
- Ponec V, Van Barnevald WA, Ind. Eng. Chem. Prod. Res. Dev., 18, 268, 1979
- Christman K, Scober O, Ertl G, Neumann M, J. Chem. Phys., 60, 4719, 1974
[Cited By]
- Miroliaei AR, Shahraki F, Atashi H, Karimzadeh R, Journal of Industrial and Engineering Chemistry, 18(6), 1912, 2012
- Mansouri M, Atashi H, Tabrizi FF, Mirzaei AA, mansouri G, Journal of Industrial and Engineering Chemistry, 19(4), 1177, 2013
- Lee E, Yun S, Park YK, Jeong SY, Han J, Jeon JK, Journal of Industrial and Engineering Chemistry, 20(3), 775, 2014
- Hemmati MR, Khodagholi MA, Korean Journal of Chemical Engineering, 32(12), 2473, 2015
|