|
Total 12 articles [ 키워드: Sintering ] |
No. |
Article |
1 |
Korean Journal of Chemical Engineering, 39 (12), pp.3464-3472 (2022) Comprehensive evaluation of high-temperature sintering behavior of sea sand vanadia-titania magnetite based on grey relational analysis Xing ZX, Huang Z, Cheng GJ, et al. |
2 |
Korean Journal of Chemical Engineering, 39 (7), pp.1796-1804 (2022) Characteristics of Li2CO3 as sintering aid for Ce0.8Sm0.2 O2-δ electrolyte in solid oxide fuel cells Park GS, Mo SI, Kim JH, et al. |
3 |
Korean Journal of Chemical Engineering, 38 (8), pp.1720-1726 (2021) Transparent Metal-Mesh heater using Silver-coated copper nanoparticles sintered with intense pulsed light irradiation on PET substrate Song SM, Cho SM |
4 |
Korean Journal of Chemical Engineering, 37 (11), pp.1907-1914 (2020) Simultaneous removal of NOx and SO2 using two-stage O3 oxidation combined with Ca(OH)2 absorption Zou Y, Wang Y, Liu X, et al. |
5 |
Korean Journal of Chemical Engineering, 37 (8), pp.1436-1439 (2020) Ultra-fast fabrication of anode-supported solid oxide fuel cells via microwave-assisted sintering technology Kim KJ, Park JH, Lee KT |
6 |
Korean Journal of Chemical Engineering, 34 (12), pp.3102-3110 (2017) Multilateral approaches for investigation of particle stickiness of coal ash at low temperature fouling conditions Namkung H, Kim HT, Wang F, et al. |
7 |
Korean Journal of Chemical Engineering, 31 (9), pp.1641-1650 (2014) Improvement of thermal regeneration of spent granular activated carbon using air agent : Application of sintering and deoxygenation Cho JH, Kim YS, Jeon SB, et al. |
8 |
Korean Journal of Chemical Engineering, 31 (2), pp.224-229 (2014) The influence of calcination temperature on catalytic activities in a Co based catalyst for CO2 dry reforming Song SH, Son JH, Budiman AW, et al. |
9 |
Korean Journal of Chemical Engineering, 27 (2), pp.645-650 (2010) Sintering characteristics of TiO2 nanoparticles by microwave processing Jung S, Kim JH |
10 |
Korean Journal of Chemical Engineering, 26 (2), pp.500-505 (2009) Influence of sintering temperature on microstructural changes of ceramic Raschig ring Salehi M, Salem A |
|
|