Oxidative coupling of methane (OCM) was carried out over Na+-ZrO2-Cl/Al2O3 catalysts in a temperature range from 1023 to 1123 K. The catalysts were prepared by impregnating the Ձ- or Ճ-Al2O3 supports with sodium carbonate and/or zirconyl chloride. The OCM activity was examined using the catalysts prepared by three different preparation procedures. The best catalyst was the one prepared by subsequent impregnation of sodium carbonate-preimpregnated Ճ-Al2O3 with a mixed solution of sodium carbonate and zirconyl chloride. It was found that preimpregnated sodium played an important role in reducing the combustion activity of the Ճ-Al2O3. The catalyst with an optimal composition showed the highest C2 selectivity and yield of 40.8% and 15.1% respectively. From the X-ray diffraction analysis it was found that tetragonal ZrO2 was formed and that NaCl existed in the catalysts with relatively high sodium contents.
Amenomiya Y, Birss VI, Goledzinowski M, Galuszka J, Sanger AR, Catal. Rev.-Sci. Eng., 32, 163, 1990
Chang JS, Park SE, J. Korean Chem. Soc., 36(1), 147, 1992
Hinsen W, Bytyn W, Baerns M, "Oxidative Dehydrogenation and Coupling of Methane," Proc. 8th Int. Congr. Catal., Berlin, Vol. III, 581, 1984
Hutchings GJ, Scurrell MS, "Studies of the Mechanism of the Oxidative Coupling of Methane Using Oxide Catalysts," in "Methane Conversion by Oxidative Processes: Fundamental and Engineering Aspects," (Wolf, E.E., ed.), Van Nostrand Reinhold, New York, 200, 1992
Keller GE, Bhasin MM, J. Catal., 73, 9, 1982
Khan AZ, Ruckenstein E, Appl. Catal. A: Gen., 90, 199, 1992
Khan AZ, Ruckenstein E, J. Catal., 139, 304, 1993
Lee JS, Oyama ST, Catal. Rev.-Sci. Eng., 30, 249, 1988
Park SE, Chang JS, Appl. Catal. A: Gen., 85, 117, 1992