|
Korean Journal of Chemical Engineering, Vol.26, No.5, 1208-1212, 2009
Developing a new model to predict mass transfer coefficient of salicylic acid adsorption onto IRA-93: Experimental and modeling
An experimental breakthrough curve for Salicylic acid in an adsorption recovery process was determined by an anion-exchange resin IRA-93. The volumetric mass transfer coefficients were calculated by employing constant wave propagation theory. Meanwhile, the effects of volumetric feed flow rates on this break through curve and mass transfer coefficients at different flow rates were also studied in order to develop three new models to predict mass transfer coefficient. The results demonstrated that by the increase in the feed flow rates, the amount of adsorption reduces. However, while the volumetric feed flow rates increase the overall volumetric mass transfer coefficients will increase. This grows the feeling that the feed flow rate should be optimized. The optimum flow rate for the adsorption was found to be 7 mg/l in this study. In addition, three new models to predict the mass transfer coefficient in respect of feed rates were developed in this research work which showed very high fittings with R2>0.99. These models could fully support the experimental data obtained.
[References]
- Otero M, Zabkova M, Rodrigues AE, Sep. Purif. Technol., 45(2), 86, 2005
- Kunin K, Pure Appl. Chem., 46, 205, 1976
- Morao A, Lopes A, de Amorim MTP, Goncalves IC, Electrochim. Acta, 49(9-10), 1587, 2004
- Kujawski W, Warszawski A, Ratajczak W, Porebski T, Capala W, Ostrowska I, Sep. Purif. Technol., 40(2), 123, 2004
- Lin SH, Pan CL, Leu HG, Chem. Eng. J., 87(2), 163, 2002
- Deosarkar SP, Pangarkar VG, Sep. Purif. Technol., 38(3), 241, 2004
- Crook EH, McDonell RP, McNulty JT, Ind. Eng. Chem. Prod. Res. Dev., 14, 113, 1975
- Farrier DS, Hines AL, Wang SE, J. Colloid Interface Sci., 69, 233, 1979
- Gusler GM, Browne TE, Cohen Y, Ind. Eng. Chem. Res., 32, 2727, 1993
- Hanesian D, Perna AJ, The sitting, process analysis and design of a manufacturing facility using hazardous material in a residential community (The manufacture of aspirin), Workbook, New Jersey Institute of Technology, Newark, New Jersey, 1999
- Daughton CG, Ternes TA, Environ. Health Perspect., 107, 907, 1999
- Erikson E, Auffarth K, Eilersen AM, Henze M, Ledin A, Water SA., 29, 2003
- Li XT, Pan BC, Meng FW, Ion. Exch. Adsorpt., 21, 209, 2005
- Chatzopoulos D, Varma A, Chem. Eng. Sci., 50(1), 127, 1995
- Wolborska A, Pustelnik P, Water Res., 30, 2643, 1996
- Slaney AJ, Bhamidimarri R, Water Sci. Technol., 38, 227, 1998
- Wolborska A, Chem. Eng. J., 73(2), 85, 1999
- Chern JM, Chien YW, Water Res., 36, 647, 2002
- Pan BC, Xiong Y, Li AM, React. Funct. Polym., 53, 63, 2002
- Salamatinia B, Kamaruddin AH, Abdullah AZ, Chem. Eng. J., 145, 259, 2008
- Takac S, Calik G, Aytar M, Ozdamar TH, Biochem. Eng. J., 2, 101, 1998
- Carberry JJ, Chemical and catalytic reaction engineering, McGraw-Hill, 1976
- Chatzopoulos D, Varma A, Chem. Eng. Sci., 50(1), 127, 1995
- Wolborska A, Pustelnik P, Water Res., 30, 2643, 1996
- Slaney AJ, Bhamidimarri R, Water Sci. Technol., 38, 227, 1998
- Wolborska A, Chem. Eng. J., 73(2), 85, 1999
[Cited By]
- Kong L, Zhang Z, Xing H, Yang Q, Su B, Bao Z, Yang Y, Ren Q, Korean Journal of Chemical Engineering, 32(3), 511, 2015
- Kim D, Lee S, Kim M, Lee E, Yoo CK, Korean Chemical Engineering Research, 54(5), 621, 2016
|