|
Korean Journal of Chemical Engineering, Vol.18, No.1, 127-132, 2001
Modeling for Industrial Heat Exchanger Type Steam Reformer
In a heat exchanger type steam methane reformer, the temperature profiles and mole fractions along the axial distance from the top of the reformer can be predicted by using the channel model, considering radiation heat transfer. The cross-section of the reformer tube was divided into several channels as concentric circles and then heat transfer and mass transfer at the interfaces between adjacent channels were considered. Because the steam reformer is operated at high temperature, the radiation and convection were combined into one heat transfer coefficient to simplify the transfer analysis. This model predicts the industrial plant data very well; therefore, it may be used with confidence to design the industrial heat exchanger type reformer.
[References]
- Allen DW, Gerhard ER, Likins MR, Ind. Eng. Chem. Process Des. Dev., 14, 256, 1975
- Bloch AG, "Thermal Radiation-Heat Transfer," Energy, Leningrad, 1967
- Elnashaie SSEH, Adris AM, Soliman MA, Al-Ubaid AS, Can. J. Chem. Eng., 70, 786, 1992
- Froment GF, Bischoff KB, "Chemical Reactor Analysis and Design," John Wiley, New York, 1979
- Khomenko AA, Apelbaum LO, Shub FS, Snagovskii S, Temkin MI, Kinet. Katal., 12, 423, 1971
- Kim DH, Lee TJ, HWAHAK KONGHAK, 29(4), 396, 1991
- Kim JH, Choi BS, Yi J, HWAHAK KONGHAK, 37(2), 210, 1999
- Ko KD, Lee JK, Park D, Shin SH, Korean J. Chem. Eng., 12(4), 478, 1995
- Kulkarni BD, Boriswamy LK, Catal. Rev.-Sci. Eng., 22, 431, 1980
- Nam SW, Yoon SP, Ha HY, Hong SA, Maganyuk AP, Korean J. Chem. Eng., 17(3), 288, 2000
- Namaguchi T, Kikuchi K, Chem. Eng. Sci., 43, 2295, 1988
- Nirula SC, "Ammonia from Natural Gas by ICI"LCA" Process," PEP review No.89-1-3, SRI International, California, 1990
- Park JH, Lee JS, Chung HC, Kim YS, Wee JH, Lim JH, Chun HS, HWAHAK KONGHAK, 36(6), 877, 1998
- Sherwood TK, Pigford RL, Wilke CR, "Mass Transfer," McGraw-Hill, 1975
- Schneider RV, LeBlanc JR, Hydrocarb. Process., Mar., 51, 1992
- Sosna MH, Yanatinskii BV, Sokolinskii YA, Evenchik NS, Nikitina LN, Theoretical Found. Chem. Eng., (in Russian), 23, 785, 1989
- Twigg MV, "Catalyst Handbook," Wolfe Publishing, 1989
- Westerterp KR, Proceedings Int. Conf. Heat & Mass Transfer, 20, 617, 1986
- Xu J, Froment GF, AIChE J., 35, 88, 1989
- Xu J, Froment GF, AIChE J., 35, 97, 1989
[Cited By]
- Lee KB, Chun BH, Lee JC, Park CJ, Kim SH, Korean Journal of Chemical Engineering, 19(1), 87, 2002
- Yeo YK, Hwang KS, Yi SC, Kang H, Korean Journal of Chemical Engineering, 21(4), 761, 2004
|