|
Korean Journal of Chemical Engineering, Vol.28, No.4, 1139-1143, 2011
Total oxidation of propane over Cu-Mn mixed oxide catalysts prepared by co-precipitation method
The catalytic activity of Cu-Mn mixed oxides with varying Cu/Mn ratios prepared by co-precipitation method was examined for the total oxidation of propane. The nature and phase of the metal oxide species formed were characterized by various methods such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), H2 temperature-programmed reduction (TPR) as well as BET surface area measurement. The co-precipitation method provides highly interdispersed copper and manganese metallic elements forming Cu-Mn mixed oxide of spinel structure (Cu1.5 Mn1.5O4). Besides the spinel-type Cu-Mn mixed oxide, CuO or Mn2O3 phases could be formed depending on the Cu/Mn molar ratio of their precursors. The catalytic activity of Cu-Mn mixed oxide catalyst for propane oxidation was much higher than those of single metal oxides of CuO and Mn2O3. The higher catalytic activity likely originates from a synergic effect of spinel-type Cu-Mn mixed oxide and CuO. The easier reducibility and BET surface area seems to be partially responsible for the high activity of Cu-Mn mixed oxide for total oxidation of propane.
[References]
- Neyestanaki AK, Kumar N, Lindfors LE, Appl. Catal. B: Environ., 7(1-2), 95, 1995
- Ferrandon M, Carno J, Jaras S, Bjornbom E, Appl. Catal. A: Gen., 180(1-2), 141, 1999
- Papaefthimiou P, Ioannides T, Verykios XE, Appl. Catal. B: Environ., 15(1-2), 75, 1998
- Morales MR, Barbero BP, Cadus LE, Appl. Catal. B: Environ., 67(3-4), 229, 2006
- Marecot P, Fakche A, Kellali B, Mabilon G, Prigent M, Barbier J, Appl. Catal. B: Environ., 3(4), 283, 1994
- Garetto TF, Rincon E, Apesteguia CR, Appl. Catal. B: Environ., 48(3), 167, 2004
- Yazawa Y, Takagi N, Yoshida H, Komai S, Satsuma A, Tanaka T, Yoshida S, Hattori T, Appl. Catal. A: Gen., 233(1-2), 103, 2002
- Carno J, Ferrandon M, Bjornbom E, Jaras S, Appl. Catal. A: Gen., 155(2), 265, 1997
- Craciun R, Nentwick B, Hadjiivanov K, Knozinger H, Appl. Catal. A: Gen., 243(1), 67, 2003
- Mirzaei AA, Shaterian HR, Kaykhaii M, Appl. Surf. Sci., 239(2), 246, 2005
- Fortunato G, Oswald HR, Reller A, J. Mater. Chem., 11, 905, 2001
- Kramer M, Schmidt T, Stowe K, Maier WF, Appl. Catal. A: Gen., 302(2), 257, 2006
- Jones C, Cole KJ, Taylor SH, Crudace MJ, Hutchings GJ, J. Mol. Catal. A-Chem., 305(1-2), 121, 2009
- Njagi EC, Chen CH, Genuino H, Galindo H, Huang H, Suib SL, Appl. Catal. B: Envron., 99, 103, 2004
- Hutchings GJ, Mirzaei AA, Joyner RW, Siddiqui MRH, Taylor SH, Appl. Catal. A: Gen., 166(1), 143, 1998
- Kanungo SB, J. Catal., 58, 419, 1979
- Chen H, Tong XL, Li YD, Appl. Catal. A: Gen., 370(1-2), 59, 2009
- Wollner A, Lange F, Schmelz H, Knozinger H, Appl. Catal. A: Gen., 94, 181, 1993
- Spassova I, Khristova M, Panayotov D, Mehandjiev D, J. Catal., 185(1), 43, 1999
- Zhi K, Liu Q, Zhang Y, He S, He R, J. Fuel Chem. Technol., 38, 445, 2010
- Tanaka Y, Takeguchi T, Kikuchi R, Eguchi K, Appl. Catal. A: Gen., 279(1-2), 59, 2005
- Sinha APB, Sanjana NR, Biswas AB, J. Phys. Chem., 62, 191, 1958
- Miahara S, J. Phys. Soc. Jpn., 17B-I, 181, 1962
- Lasse GB, J. Phys. Chem. Solids., 27, 383, 1966
- Veprek S, Cocke DL, Kehl S, Oswald HR, J. Catal., 100, 250, 1986
- Solsona B, Davies TE, Garcia T, Vazquez I, Dejoz A, Taylor SH, Appl. Catal. B: Environ., 84(1-2), 176, 2008
- Leith IR, Howden MG, Appl. Catal., 37, 75, 1992
- Gentry SJ, Hurst NW, Jones A, J. Chem. Soc. Faraday Trans. I., 77, 603, 1981
- Buciuman FC, Patcas F, Chem. Eng. Process., 38, 569, 1999
[Cited By]
- Ahn CW, You YW, Heo I, Hong JS, Jeon JK, Ko YD, Kim YH, Park H, Suh JK, Journal of Industrial and Engineering Chemistry, 47, 439, 2017
- Lee HJ, Yang JH, You JH, Yoon BY, Journal of Industrial and Engineering Chemistry, 89, 156, 2020
|