|
Korean Journal of Chemical Engineering, Vol.33, No.2, 616-622, 2016
Preparation of nanoporous activated carbon and its application as nano adsorbent for CO2 storage
Nanoporous activated carbons, as adsorbent for CO2 storage, were prepared from walnut shells via two chemical processes including phosphoric acid treatment and KOH activation at high temperature. Specific surface area and porosities were controlled by KOH concentration and activation temperature. The obtained adsorbents were characterized by N2 adsorption at 77.3 K. Their carbon dioxide adsorption capacities were measured at different pressures at 290 K by using volumetric adsorption equipment. The KOH-treated nanoporous carbons typically led to the production of high specific surface areas and high micropore volumes and showed better performance for CO2 adsorptions. The maximum experimental value for adsorption capacity happened when pressure increased from 5 to 10 bar (1.861-2.873mmol·g.1). It was found that in order to improve the highest capacity of CO2 adsorption for KOH-modified carbon (9.830-18.208mmol·g.1), a KOH: C weight ratio of 3.5 and activation temperature of 973 K were more suitable for pore development and micro-mesopore volume enhancement.
[References]
- Siriwardance R, Shen M, Fisher E, Poston J, Smith DH, U.S Department of energy, National energy technology laboratory, 3610 Collins Ferry Road, Morgantown, WV 26507-0880.
- Na BK, Koo KK, Eum HM, Lee H, Song HK, Korean J. Chem. Eng., 18(2), 220, 2001
- Hwang KS, Gong SY, Lee WK, Korean J. Chem. Eng., 8(3), 148, 1991
- Xu XC, Song CS, Andresen JM, Miller BG, Scaroni AW, Energy Fuels, 16(6), 1463, 2002
- Siriwardane RV, Shen MS, Fisher EP, Energy Fuels, 19(3), 1153, 2005
- Bansal RC, Dannet J, Stoectdi F, Activated carbon, Marcel Dekker (1998).
- Buczek B, Swiatkowski A, Zietek S, Trznadel BJ, Fuel, 79, 1247, 2000
- Daud WMAW, Shabuddin W, Sulaiman MZ, Carbon, 38, 1925, 2000
- Arenillas A, Smith KM, Drage TC, Snape CE, Fuel, 84(17), 2204, 2005
- Drage TC, Arenillas A, Smith KM, Pevida C, Piippo S, Snape CE, Fuel, 86(1-2), 22, 2007
- Gray ML, Soong Y, Champagne KJ, Baltrus J, Stevens RW, Toochinda P, Chuang SSC, Sep. Purif. Technol., 35(1), 31, 2004
- Huang HY, Yang RT, Chinn D, Munson CL, Ind. Eng. Chem. Res., 42(12), 2427, 2003
- Maroto-Valer MM, Tang Z, Zhang YZ, Fuel Process. Technol., 86(14-15), 1487, 2005
- Przepiorski J, Skrodzewicz M, Morawsid AW, Appl. Surf. Sci., 225, 335, 2004
- Plaza MG, Pevida C, Arenillas A, Rubiera F, Pis JJ, Fuel, 86(14), 2204, 2007
- Plaza MG, Pevida C, Arias B, Fermoso J, Arenillas A, Rubiera F, Pis JJ, J. Therm. Anal. Calorim., 92, 601, 2008
- Gil RR, Ruiz B, Lozano MS, Fuente E, J. Anal. Appl. Pyrolysis, 110, 194, 2014
- Balsamo M, Budinova T, Erto A, Lancia A, Petrova B, Petrov N, Tsyntsarski B, Sep. Purif. Technol., 116, 214, 2013
- Robertson C, Mokaya R, Microporous Mesoporous Mater., 179, 151, 2013
- Guo B, Chang L, Xie K, J. Nat. Gas Chem., 15, 223, 2006
- Himeno S, Komatsu T, Fujita S, J. Chem. Eng. Data, 50(2), 369, 2005
- Sevilla M, Fuertes AB, J. Colloid Interface Sci., 366(1), 147, 2012
- Kim BJ, Cho KS, Park SJ, J. Colloid Interface Sci., 342(2), 575, 2010
- Meng LY, Park SJ, Mater. Chem. Phys., 137(1), 91, 2012
- Otowa T, Tanibata R, Itoh M, Gas Sep. Purif., 7, 241, 1993
- Py X, Goetz V, Plantard G, Chem. Eng. Process., 47(3), 308, 2008
- Meng LY, Park SJ, Bull. Korean Chem. Soc., 33, 3749, 2012
- Romanos J, Beckner M, Rash T, Firlej L, Kuchta B, Yu P, Suppes G, Wexler C, Pfeifer P, Nanotechnology, 23, 015401, 2012
|