Overall
- Language
- English
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
- Publication history
-
Received April 13, 2010
Accepted July 19, 2010
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits
unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
Most Cited
Pinhole formation in PEMFC membrane after electrochemical degradation and wet/dry cycling test
Department of Chemical Engineering, Sunchon National University, 315 Magok-dong, Suncheon-si, Jeollanam-do 540-742, Korea 1HMC Eco Technology Research Institute, 104 Mabuk-dong, Giheung-gu, Youngin-si, Gyunggi-do 446-912, Korea
parkkp@sunchon.ac.kr
Korean Journal of Chemical Engineering, February 2011, 28(2), 487-491(5), 10.1007/s11814-010-0381-6
Download PDF
Abstract
During the operation of a PEMFC, the polymer membrane is degraded by electrochemical reactions and mechanical stresses. We investigated the effects of repeated electrochemical and mechanical degradations in a membrane. For mechanical degradation, the membrane and MEA were repeatedly subjected to wet/dry cycles; for electrochemical degradation, the cell was operated under open-circuit voltage (OCV)/low-humidity conditions. The repeated wet/dry cycles led to a decrease in the mechanical strength of the membrane. When the MEA was degraded electrochemically, repeated wet/dry cycling resulted in the formation of pinholes in the membrane. In the case of different MEAs that were first degraded electrochemically, the extents of their hydrogen crossover currents increased due to repeated wet/dry cycling being different. Therefore, these results indicated that the membrane durability could be evaluated by these methods of repeated electrochemical degradation and wet/dry cycles.
Keywords
References
Uribe FA, Gottesfeld S, Zawodzinski TA, J. Electrochem. Soc., 149(3), A293 (2002)
Okada T, Handbook of Fuel Cells vol.3, John Wiley & Sons Ltd., Chichester, Elgland, 627 (2003)
Kienitz BL, Baskaran H, Zawodzinski TA, Electrochim. Acta, 54(6), 1671 (2009)
Okada T, Satou H, Okuno M, Yuasa M, J. Phys. Chem. B, 106(6), 1267 (2002)
Laconti AB, Hamdan M, McDonald RC, Handbook of Fuel Cells vol.3, John Wiley & Sons Ltd., Chichester, Elgland, 647 (2003)
Mittal VO, Kunz HR, Fenton JM, Electrochem. Solid State Lett., 9(6), A299 (2006)
Liu W, Zuckerbrod D, J. Electrochem. Soc., 152(6), A1165 (2005)
Endoh E, Terazono S, Widjaja H, Takimoto Y, Electrochem. Solid State Lett., 7(7), A209 (2004)
Wahdame B, Candusso D, Harel F, Francois X, Pera MC, Hissel D, Kauffmann JM, J. Power Sources, 182(2), 429 (2008)
Dong Q, Mench MM, Cleghorn S, Beuscher U, J. Electrochem. Soc., 152(11), A2114 (2005)
Teranishi K, Kawata K, Tsushima S, Hirai S, Electrochem. Solid State Lett., 9(10), A475 (2006)
Ohma A, Suga S, Yamamoto S, Shinohara K, J. Electrochem. Soc., 154(8), B757 (2007)
Yu HM, Ziegler C, J. Electrochem. Soc., 153(3), A570 (2006)
Ralph TR, Barnwell DE, Bouwman PJ, Hodgkinson AJ, Petch MI, Pollington M, J. Electrochem. Soc., 155(4), B411 (2008)
Mathias MF, Makharia R, Gasteiger HA, Conley JJ, Fuller TJ, Gittleman CJ, Kocha SS, Miller DP, Mittelsteadt CK, Xie T, Yan SG, Yu PT, Electrochem. Soc. Interface., 14(3), 24 (2005)
Tang HL, Shen PK, Jiang SP, Fang W, Mu P, J. Power Sources, 170(1), 85 (2007)
Huang XY, Solasi R, Zou Y, Feshler M, Reifsnider K, Condit D, Burlatsky S, Madden T, J. Polym. Sci. B: Polym. Phys., 44(16), 2346 (2006)
Chen C, Fuller TF, Polymer Degradation and Stability., 94, 1436 (2009)
Okada T, Handbook of Fuel Cells vol.3, John Wiley & Sons Ltd., Chichester, Elgland, 627 (2003)
Kienitz BL, Baskaran H, Zawodzinski TA, Electrochim. Acta, 54(6), 1671 (2009)
Okada T, Satou H, Okuno M, Yuasa M, J. Phys. Chem. B, 106(6), 1267 (2002)
Laconti AB, Hamdan M, McDonald RC, Handbook of Fuel Cells vol.3, John Wiley & Sons Ltd., Chichester, Elgland, 647 (2003)
Mittal VO, Kunz HR, Fenton JM, Electrochem. Solid State Lett., 9(6), A299 (2006)
Liu W, Zuckerbrod D, J. Electrochem. Soc., 152(6), A1165 (2005)
Endoh E, Terazono S, Widjaja H, Takimoto Y, Electrochem. Solid State Lett., 7(7), A209 (2004)
Wahdame B, Candusso D, Harel F, Francois X, Pera MC, Hissel D, Kauffmann JM, J. Power Sources, 182(2), 429 (2008)
Dong Q, Mench MM, Cleghorn S, Beuscher U, J. Electrochem. Soc., 152(11), A2114 (2005)
Teranishi K, Kawata K, Tsushima S, Hirai S, Electrochem. Solid State Lett., 9(10), A475 (2006)
Ohma A, Suga S, Yamamoto S, Shinohara K, J. Electrochem. Soc., 154(8), B757 (2007)
Yu HM, Ziegler C, J. Electrochem. Soc., 153(3), A570 (2006)
Ralph TR, Barnwell DE, Bouwman PJ, Hodgkinson AJ, Petch MI, Pollington M, J. Electrochem. Soc., 155(4), B411 (2008)
Mathias MF, Makharia R, Gasteiger HA, Conley JJ, Fuller TJ, Gittleman CJ, Kocha SS, Miller DP, Mittelsteadt CK, Xie T, Yan SG, Yu PT, Electrochem. Soc. Interface., 14(3), 24 (2005)
Tang HL, Shen PK, Jiang SP, Fang W, Mu P, J. Power Sources, 170(1), 85 (2007)
Huang XY, Solasi R, Zou Y, Feshler M, Reifsnider K, Condit D, Burlatsky S, Madden T, J. Polym. Sci. B: Polym. Phys., 44(16), 2346 (2006)
Chen C, Fuller TF, Polymer Degradation and Stability., 94, 1436 (2009)
