ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2025 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received August 19, 2016
Accepted November 29, 2016
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Comparative study of electrocoagulation and electrochemical Fenton treatment of aqueous solution of benzoic acid (BA): Optimization of process and sludge analysis

Department of Chemical Engineering, Indian Institute of Technology Roorkee, Roorkee-247667 (Uttarakhand), India
vksandhwar@gmail.com
Korean Journal of Chemical Engineering, April 2017, 34(4), 1062-1072(11)
https://doi.org/10.1007/s11814-016-0343-8
downloadDownload PDF

Abstract

Benzoic acid containing synthetic solution was pretreated by acid precipitation at various pH (1-3) and temperature (15-60 °C). Pre-treated solution was further treated by electrocoagulation (EC) and electrochemical Fenton (EF) processes using iron anode and graphite cathode. Optimization of independent operating parameters, namely, initial pH: (3-11), current density (A/m2): (15.24-76.21), electrolyte concentration (mol/L): (0.03-0.07) and electrolysis time (min): (15-95) for EC process and pH: (1-5), current density (A/m2): (15.24-76.21), H2O2 concentration (mg/L): (100-500) and electrolysis time (min): (15-95) for EF process, was performed using central composite design (CCD) in response surface methodology (RSM). Maximum removal efficiencies of BA- 76.83%, 88.50%; chemical oxygen demand (COD) - 69.23%, 82.21% and energy consumption (kWh/kg COD removed) - 30.86, 21.15 were achieved by EC and EF processes, respectively, at optimum operating conditions. It was found that EF process is more efficient than EC process based on removal of BA and COD with lower energy consumption. The sludge obtained after EC and EF treatments was analyzed by XRD, FTIR, DTA/TGA and SEM/EDX techniques.

References

Wittcoff HA, Reuben BG, Plotkin JS, Industrial Organic Chemicals, 2nd Ed., Wiley-Interscience (2004).
Kleerebezem R, Beckers J, Pol LWH, Lettinga G, Biotechnol. Bioeng., 91(2), 169 (2005)
Pophali GR, Khan R, Dhodapkar RS, Nandy T, Devotta S, J. Environ. Manage., 85, 1024 (2007)
Karthik M, Dafale N, Pathe P, Nandy T, J. Hazard. Mater., 154(1-3), 721 (2008)
Guyot JP, Macarie H, Noyola A, Appl. Biochem. Biotechnol., 24/25, 579 (1990)
Macarie H, Guyot JP, Appl. Microbiol. Biotechnol., 38, 398 (1992)
Young JC, Kim IS, Page IC, Wilson DR, Brown GJ, Cocci AA, Water Sci. Technol., 42, 277 (2000)
Noyola A, Macarie W, Guyot JP, Environ. Technol., 11, 239 (1990)
Zhang XX, Cheng SP, Wan YQ, Sun SL, Zhu CJ, Zhao DY, Pan WY, Int. Biodeterior. Biodegrad., 58, 94 (2006)
Shirota M, Seki T, Tago K, Katoh H, Marumo H, Furuya M, Shindo T, Ono H, J. Toxicol. Sci., 33, 431 (2008)
US EPA, Part 136 (1992).
Thamer BJ, Voigt AF, J. Phys. Chem., 56, 225 (1952)
Zhang XX, Sun SL, Zhang Y, Wu B, Zhang ZY, Liu B, Yang LY, Cheng SP, J. Hazard. Mater., 176(1-3), 300 (2010)
Meyer RB, Fischbein A, Rosenman K, Lerman Y, Drayer DE, Reidenberg MM, Am. J. Med., 76, 989 (1984)
Cui L, Shi Y, Dai G, Pan H, Chen J, Song L, Wang S, Chang HC, Sheng H, Wang X, Toxicol. Appl. Pharmcol., 210, 24 (2006)
Cui L, Dai G, Xu L, Wang S, Song L, Zhao R, Xiao H, Zhou J, Wang X, Toxicology, 201, 59 (2004)
Wibbertmann A, Kielhorn JG, Koennecker I, Mangelsdorf C, Melber C, World Health Organization (2000).
Verrna S, Prasad B, Mishra IM, J. Hazard. Mater., 178(1-3), 1055 (2010)
Wu CH, React. Kinet. Catal. Lett., 90(2), 301 (2007)
Central Pollution Control Board (CPCB) (2005).
Asghar A, Raman AAA, Daud WMAW, J. Clean Prod., 87, 826 (2015)
Chon MA, Sharma AK, Burn S, Saint CP, J. Clean Prod., 35, 230 (2012)
Lopez-Grimau V, Gutierrez MC, Valldeperas J, Crespi M, Color Technol., 128, 36 (2011)
Chen GH, Sep. Purif. Technol., 38(1), 11 (2004)
Holt PK, Barton GW, Mitchell CA, Chemosphere, 59, 355 (2005)
Brillas E, Sires I, Oturan MA, Chem. Rev., 109(12), 6570 (2009)
Li JP, Ai ZH, Zhang LZ, J. Hazard. Mater., 164(1), 18 (2009)
Atmaca E, J. Hazard. Mater., 163(1), 109 (2009)
Neyens E, Baeyens J, J. Hazard. Mater., 98(1-3), 33 (2003)
Ma J, Song W, Chen C, Ma W, Zhao J, Tang Y, Environ. Sci. Technol., 395, 5810 (2005)
Mohajeri S, Aziz HA, Isa MH, Zahed MA, Adlan MN, J. Hazard. Mater., 176, 749 (2009)
Azama M, Bahram M, Nouri S, Naseri A, J. Serb. Chem. Soc., 77, 235 (2012)
Garcia-Segura S, Almeida LC, Bocchi N, Brillas E, J. Hazard. Mater., 194, 109 (2011)
Virkutyte J, Rokhina E, Jegatheesan V, Bioresour. Technol., 101(5), 1440 (2010)
Marashi SKF, Kariminia HR, Savizi ISP, Biotechnol. Lett., 35(2), 197 (2013)
Verma S, Prasad B, Mishra IM, Ind. Eng. Chem. Res., 50(9), 5352 (2011)
Garg KK, Prasad B, J. Taiwan Inst. Chem. Eng., 56, 122 (2015)
APHA, Washington DC, U.S.A. (1995).
Garg KK, Prasad B, Srivastava VC, Sep. Purif. Technol., 128, 80 (2014)
Garg KK, Prasad B, J. Environ. Chem. Eng., 4, 178 (2016)
Thiruvenkatachari R, Kwon TO, Moon IS, J. Environ. Sci. Health Part A-Toxic/Hazard. Subst. Environ. Eng., 41, 1685 (2006)
Park TJ, Lim JS, Lee YW, Kim SH, J. Supercrit. Fluids, 26(3), 201 (2003)
Garg KK, Prasad B, J. Environ. Chem. Eng., 3, 1731 (2015)
Verma S, Prasad B, Mishra IM, J. Hazard. Toxic Radioact. Waste., 18(3), 040140 (2014)
Can OT, Bayramoglu M, Kobya M, Ind. Eng. Chem. Res., 42(14), 3391 (2003)
Kushwaha JP, Srivastava VC, Mall ID, Environ. Energy Eng., 57, 2589 (2010)
Kallel M, Belaid C, Boussahel R, Ksibi M, Montiel A, Elleuch B, J. Hazard. Mater., 163(2-3), 550 (2009)
Watts RJ, Foget MK, Kong SH, Teel AL, J. Hazard. Mater., 69, 229 (1999)
Nidheesh PV, Gandhimathi R, Desalination, 299, 1 (2012)
Nidheesh PV, Gandhimathi R, Environ. Sci. Pollut. Res., 21, 8585 (2014)
Lee H, Shoda M, J. Hazard. Mater., 153(3), 1314 (2008)
Badawy MI, Ali MEM, J. Hazard. Mater., 136(3), 961 (2006)
Oturan MA, Oturan N, Lahitte C, Trevin S, J. Electroanal. Chem., 507(1-2), 96 (2001)
Kurt U, Apaydin O, Gonullu MT, J. Hazard. Mater., 143(1-2), 33 (2007)
Narayanan TSNS, Magesh G, Rajendran N, Fresenius Environ. Bull., 12, 776 (2003)
Song G, Cao C, Chen SH, Corrosion Sci., 47, 323 (2005)
ASTM, D 3838-05, Philadelphia PA, United State of America (2011).
Garg KK, Prasad B, J. Taiwan Inst. Chem. Eng., 60, 383 (2016)

The Korean Institute of Chemical Engineers. F5,119, Anam-ro, Seongbuk-gu, Seoul, Republic of Korea
TEL. No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로