ISSN: 0256-1115 (print version) ISSN: 1975-7220 (electronic version)
Copyright © 2024 KICHE. All rights reserved

Articles & Issues

Language
English
Conflict of Interest
In relation to this article, we declare that there is no conflict of interest.
Publication history
Received June 30, 2013
Accepted January 12, 2014
articles This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.
Copyright © KIChE. All rights reserved.

All issues

Characteristics of coal upgraded with heavy oils

1Clean Fuel Center, Korea Institute of Energy Research, Daejeon 305-343, Korea 2Department of Green Energy Technology, Graduate School of Green Energy Technology, Chungnam National University, 99, Daehak-ro, Yuseong-gu, Daejeon 305-764, Korea
cian@kier.re.kr
Korean Journal of Chemical Engineering, June 2014, 31(6), 981-985(5), 10.1007/s11814-014-0017-3
downloadDownload PDF

Abstract

We investigated the ability of an oil coating to upgrade Indonesian low-rank coal, which has a low ash content and a moisture content of approximately 30%. Proximate and ultimate analyses of the characteristics of coal samples containing different amounts of asphalt (ASP) and palm fatty acid distillate (PFAD) were studied, including the samples’ calorific values, crossing-point temperatures (CPT), specific surface areas, pore sizes, structural changes, and moisture readsorption. The results showed that the 0.5% PFAD-coated coal was the highest quality. This coal showed few physical and chemical changes, and it had a low surface area and a high CPT value.

References

Katalambula H, Gupta R, Energy Fuels, 23(7), 3392 (2009)
Li CZ, Advances in the science of victorian brown coals, Elsevier, Oxford (2004)
Sugita S, Deguchi T, Shigehisa T, Kobe Steel Engineering Reports Vol. 53, Kobe Steel, Ltd., Japan (2003)
Umar DF, Daulay B, Usui H, Deguchi T, Sugita S, Coal Prep., 25, 31 (2005)
Kinoshita S, Yomamoto S, Deguchi T, Shigehisa T, Kobelco Technology Review No. 29, Kobe Steel, Ltd., Japan (2010)
Carras JN, Young BC, Prog. Energy Combust., 20, 1 (1994)
Choi H, Thiruppathiraja C, Kim S, Rhim Y, Lim J, Lee S, Fuel Process. Technol., 92(10), 2005 (2011)
Jo W, Choi H, Kim S, Yoo J, Chun D, Rhim Y, Lim J, Lee S, Korean J. Chem. Eng., 30(5), 1034 (2013)
Weiquing Z, Shuguang J, Kai W, Lanyun W, Zhengyan W, Liwen K, Xiaorui J, Procedia Eng., 26, 480 (2011)
Ohki A, Xie X, Inakajima T, Itahara T, Maeda S, Coal Prep., 21, 23 (1999)
Tahmasebi A, Yu JL, Han YN, Yin FK, Bhattacharya S, Stokie D, Energy Fuels, 26(6), 3651 (2012)
Tahmasebi A, Yu JL, Bhattacharya S, Energy Fuels, 27(1), 154 (2013)
Kim HS, Nishiyama Y, Ideta K, Miyawaki J, Matsushita Y, Park JI, Mochida I, Yoon SH, J. Ind. Eng. Chem., 19(5), 1673 (2013)
Brunauer S, Emmett PH, Teller E, J. Am. Chem. Soc., 60, 309 (1938)
Barret EP, Joyner LG, Halenda PH, J. Am. Chem. Soc., 73, 373 (1951)
Sing KSW, Everett DH, Haul RAW, Moscou L, Pierotti RA, Rouquerol J, Siemieniewska T, Pure Appl. Chem., 57, 603 (1985)
Rouquerol F, Rouquerol J, Sing K, Adsorption by powders and porous solids, Academic Press, London (1999)

The Korean Institute of Chemical Engineers. F5, 119, Anam-ro, Seongbuk-gu, 233 Spring Street Seoul 02856, South Korea.
Phone No. +82-2-458-3078FAX No. +82-507-804-0669E-mail : kiche@kiche.or.kr

Copyright (C) KICHE.all rights reserved.

- Korean Journal of Chemical Engineering 상단으로