Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support (γ-Al₂O₃/α-Al₂O₃ composite) by dip coating and then heat-treated at 550 ℃. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20-40 ℃ conditions and 0.0-1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂>CO₂>N₂>CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂>CH₄>CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion.

Surface Diffusion Knudsen Diffusion Blocking Effect Silica Membrane Adsorption TPABr Templating Method Separation Factor

Ahn H, Yoo HK, Shul Y, Hyun S, Lee CH, J. Chem. Eng. Jpn., 35(4), 334 (2002) 
Bae JS, Do DD, Korean J. Chem. Eng., 20(6), 1097 (2003)
Bhandarkar M, Shelekhin AB, Dixon AG, Ma YH, J. Membr. Sci., 75, 221 (1992) 
Bhave RR, "Inorganic Membranes: Synthesis: Characteristics and Applications," Van Nostrand Reinhold, New York (1991)
Bond RL, "Porous Carbon Solids," New York, Academic Press, Chaps. 1, 5 and 6 (1967)
Burggraaf AJ, Cot L, "Fundamentals of Inorganic Membrane Science and Technology," Elsevier (1996)
Hasegawa Y, Tanaka T, Watanabe K, Jeong BH, Kusakabe K, Morooka S, Korean J. Chem. Eng., 19(2), 309 (2002)
Hwang ST, Kammermeyer K, "Membranes in Separations," John Wiley & Sons (1975)
Jia MD, Chen BS, Noble RD, Falconer JL, J. Membr. Sci., 90(1-2), 1 (1994) 
Jolinde M, vandeGraafKapteijn F, Moulijn JA, Microporous Mesoporous Mater., 35-36, 267 (2000) 
van de Graaf JM, Kapteijn F, Moulijn JA, J. Membr. Sci., 144(1-2), 87 (1998) 
Kapoor A, Yang RT, Wong C, Catal. Rev.-Sci. Eng., 31, 129 (1989)
Karger J, Ruthven DM, "Diffusion in Zeolites and other Microporous Solids," John Wiley & Sons (1992)
Keizer K, Uhlhorn RJR, vanVuren RJ, Burggraaf AJ, J. Membr. Sci., 39, 285 (1988) 
Kim SS, Sea BK, Korean J. Chem. Eng., 18(3), 322 (2001)
Kim YS, Kusakabe K, Morooka S, Yang SM, Korean J. Chem. Eng., 18(1), 106 (2001)
Lee D, Oyama ST, J. Membr. Sci., 210(2), 291 (2002) 
Raman NK, Brinker CJ, J. Membr. Sci., 105(3), 273 (1995) 
Rao MB, Sircar S, J. Membr. Sci., 85, 253 (1993) 
Ross S, Oliver JP, "On Physical Adsorption," Interscience, New York (1964)
Talu O, Kabe RL, AIChE J., 33, 510 (1987) 
Uchytil P, J. Membr. Sci., 97, 139 (1994)
Vroon ZA, Keizer K, Gilde MJ, Verweij H, Burggraaf AJ, J. Membr. Sci., 113(2), 293 (1996) 
West GD, Diamond GG, Holland D, Smith ME, Lewis MH, J. Membr. Sci., 203(1-2), 53 (2002) 
Xomeritakis G, Naik S, Braunbarth CM, Cornelius CJ, Pardey R, Brinker CJ, J. Membr. Sci., 215(1-2), 225 (2003) 
Yang RT, "Gas Separation by Adsorption Processes," Butterworths (1987)
Yang SM, Lee YE, Hyun SH, Lee CH, J. Mater. Sci., 37(12), 2519 (2002)