Issue
Korean Journal of Chemical Engineering,
Vol.29, No.9, 1259-1265, 2012
Electroless deposition of NiMoP films using alkali-free chemicals for capping layers of copper interconnections
NiMoP films were electrolessly deposited on copper substrates in a bath containing alkali-free chemicals. The film characteristics such as composition, thickness (or deposition rate), and microstructure were investigated by varying the concentration of the electrolyte. The film thickness increased with nickel ion concentration and decreased with increasing concentrations of either molybdate or hypophosphite ions. The nickel, molybdenum, and phosphorous content of the film increased as the concentrations of their corresponding precursors increased in the bath. Microstructural analysis showed that amorphous films formed when the combined content of molybdenum and phosphorous in the film was sufficiently high. Higher combined contents of molybdenum and phosphorous also improved the corrosion resistance of the film.
[References]
  1. Dubin VM, Shachamdiamand Y, Zhao B, Vasudev PK, Ting CH, J. Electrochem. Soc., 144(3), 898, 1997
  2. Andricacos PC, Uzoh C, Dukovic JO, Horkans J, Deligianni H, IBM J. Res. Dev., 42, 567, 1998
  3. Shacham-Diamand Y, Dedhia A, Hoffstetter D, Oldham WG, J. Electrochem. Soc., 140, 2427, 1993
  4. Shachamdiamand Y, Dubin V, Angyal M, Thin Solid Films, 262(1-2), 93, 1995
  5. Namkoung YM, Lee HM, Son YS, Lee K, Kim CK, Korean J. Chem. Eng., 27(5), 1596, 2010
  6. Shacham-Diamand Y, Sverdlov Y, Petrov N, J. Electrochem. Soc., 148(3), C162, 2001
  7. Dulal SMSI, Kim TH, Shin CB, Kim CK, J. Alloy.Compd., 461, 382, 2008
  8. Dulal SMSI, Yun HJ, Shin CB, Kim CK, Electrochim. Acta, 53(2), 934, 2007
  9. Nakano H, Itabashi T, Akahoshi H, J. Electrochem. Soc., 152(3), C163, 2005
  10. Antonelli SB, Allen TL, Johnson DC, Dubin VM, J. Electrochem. Soc., 153(6), J46, 2006
  11. Osaka T, Takano N, Kurokawa T, Ueno K, Electrochem. Solid State Lett., 5(1), C7, 2002
  12. Chou YH, Sung Y, Liu YM, Pu NW, Ger MD, Surf. Coat.Technol., 203, 1020, 2009
  13. Liu DL, Yang ZG, Zhang C, Mater. Sci. Eng. B., 166, 67, 2010
  14. Revesz A, Lendvai J, Loranth J, Padar J, Bakonyi I, J. Electrochem. Soc., 148(11), C715, 2001
  15. Deal EB, IEEE Trans. Electron. Devices., ED-27, 606, 1980
  16. Gambino J, Wynne J, Gill J, Mongeon S, Meatyard D, Lee B, Bamnolker H, Hall L, Li N, Hernandez M, Little P, Hamed M, Ivanov I, Gan CL, Microelectron. Eng., 83, 2059, 2006
  17. Chang SY, Wan CC, Wang YY, Shih CH, Tsai MH, Shue SL, Yu CH, Liang MS, Thin Solid Films, 515(3), 1107, 2006
  18. Chou YH, Sung Y, Bai CY, Ger MD, J. Electrochem. Soc., 155(9), D551, 2008
  19. Gomez E, Pellicer E, Valles E, J. Electroanal. Chem., 580(2), 222, 2005
  20. WertheimGK, Wernick JH, Crecelius G, Phys. Rev. B., 18, 875, 1978
  21. Klein JC, Hercules DM, J. Catal., 82, 424, 1983
  22. Brox B, Olefjord I, Surf. Interface Anal., 13, 3, 1988
  23. Anwar M, Hogarth CA, Bulpett R, J. Mater. Sci., 24, 3087, 1989
  24. Okamoto Y, Imanaka T, Teranishi S, J. Catal., 65, 448, 1980
  25. Taniguchi M, Suga S, Seki M, Sakamoto H, Kanzaki H, Akahama Y, Terada S, Endo S, Narita S, Solid State Commu., 45, 59, 1983
  26. Myers CE, Franzen HF, Anderegg JW, Inorg. Chem., 24, 1822, 1985
  27. Keong KG, Sha W, Malinov S, J. Alloy. Compd., 334, 192, 2002
  28. Niedbala J, Materials Science Forum., 514, 465, 2006
  29. Stern M, Geary AL, J. Electrochem. Soc., 104, 56, 1957