Issue
Korean Journal of Chemical Engineering
ISSN 0256-1115
Volume 23, Number 4
Korean J. Chem. Eng. 23(4), 517-687
July, 2006
28 articles Entire volume, number list
517-521 Characterization of crude feed and products from operating conditions by using continuous probability functions and inferential models
Lee DH, Lee ES, Park SJ
522-530 Simulation of fixed bed reactor for dimethyl ether synthesis
Lee SB, Cho W, Park DK, Yoon ES
531-539 Prediction of concentration and temperature profiles for non-isothermal ethane cracking in a pipe reactor
Garg RK, Krishnan VV, Srivastava VK
540-546 Nonlinear model based control of two-product reactive distillation column
Han M, Clough DE
547-554 Thermodynamic features of the Cu-ZSM-5 catalyzed NO decomposition reaction
Lee DK
555-559 Platinum electroless deposition on Nafion membrane for PEM fuel cells
Hawut W, Hunsom M, Pruksathorn K
560-565 On the modeling of electro-hydrodynamic flow in a wire-plate electrostatic precipitator
Chun YN, Yeom DS
566-569 Preparation and electrochemical properties of Li1.1Mn2O3.9F0.1 material for lithium secondary battery
Lee YS, Cho SJ, Yoshio M
570-575 Optimum condition of membrane electrode assembly fabrication for PEM fuel cells
Nakrumpai B, Pruksathorn K, Piumsomboon P
576-580 Gasification characteristics of combustible wastes in a 5 ton/day fixed bed gasifier
Lee SH, Choi KB, Lee JG, Kim JH
581-591 Analytical methods of size distribution for organic matter in water and wastewater
Shon HK, Kim SH, Erdei L, Vigneswaran S
592-594 Feasibility of bamboo-based activated carbons for an electrochemical supercapacitor electrode
Kim C, Lee JW, Kim JH, Yang KS
595-600 Enhancement of UV disinfection efficiency by arraying inclined lamps
Lim SJ, Lee YJ
601-606 Modification of lipase from Candida rugosa with poly(ethylene oxide-co-maleic anhydride) and its separation using aqueous two-phase partition system
Park K, Lee S, Maken S, Koh W, Min B, Park J
607-609 Purification of recombinant Pfu DNA polymerase using a new JK110 resin
Sun Z, Cai J
610-616 Kinetics of volume expansion during infusion of Ringer’s solution based on single volume model
Choi KT, Yeo YK
617-624 Performance study on ultrafiltration of Kraft black liquor and membrane characterization using Spiegler-Kedem model
Sarkar P, Datta S, Bhattacharjee C, Bhattacharya PK, Gupta BB
625-630 Characteristics and recognition mechanism of monolithic poly(methacrylic acid-ethylene glycol dimethacrylate) column
Yan H, Jin L, Row KH
631-637 Measurement and modelling of phase equilibria for ethanol+water+1-pentanol at isobaric condition
Goenaga JM, Gonzalez-Olmos R, Iglesias M, Resa JM
638-644 Adsorption and desorption characteristics of 2-methyl-4-chlorophenoxyacetic acid onto activated carbon
Cho SY, Park SS, Kim SJ, Kim TY
645-649 Reaction rate of carbon dioxide in glycidyl methacrylate solution using tricaprylylmethylammonium chloride as a catalyst
Park SW, Park DW, Lee JW
650-657 A new correlation for VLE data: Application to binary mixtures containing nitrogen
Mulero A, Larrey D, Cuadros F
658-662 Drying performance of a tumbler dryer with condenser
Lee KS, Yang B, Pyo SY, Kim HG, Lee DH, Kim SD
663-668 Preparation of powdered activated carbon from rice husk and its methane adsorption properties
Balathanigaimani MS, Kang HC, Shim WG, Kim C, Lee JW, Moon H
669-671 Spectral dependency of Eu2+-activated silicate phosphors on the composition for LED application
Kim SH, Lee HJ, Kim KP, Yoo JS
672-677 Effects of oil type on the properties of short oil alkyd coating materials
Atimuttigul V, Damrongsakkul S, Tanthapanichakoon W
678-682 Fabrication of high aspect ratio nanostructures using capillary force lithography
Suh KY, Jeong HE, Park JW, Lee SH, Kim JK
683-687 Synthesis of aluminum isopropoxide from aluminum dross
Yoo SJ, Yoon HS, Jang HD, Lee JW, Hong ST, Lee MJ, Lee SI, Jun KW