Search / Korean Journal of Chemical Engineering
Korean Chemical Engineering Research,
Vol.48, No.1, 33-38, 2010
은 표면의 이중층 지질막에 의한 구리 이온 농도 측정용 마이크로플루이딕 시스템
Microfluidic System for the Measurement of Cupric Ion Concentration using Bilayer Lipid Membrane on Silver Surface
구리 이온 농도를 측정하기 위하여 생체재료를 사용하여 마이크로플루이딕 시스템을 제작하였다. 은 전극에 세포막을 모방한 이중층 지질막(bilayer lipid membrane; BLM)을 피복하여 제2 구리 이온 농도를 감지하도록 하였다. 은 전극에 지지된 BLM은 그 안정성이 증대되었다. 은에 지지된 이중층 지질막(s-BLM)은 은 전선을 지질 (phosphatidylcholine; PC) 용액에 담갔다가 KCl 용액에 담글 때 자기조립 특성에 의하여 용이하게 형성할 수 있다. 이 지지된 이중층 지질막(s-BLM)은 Cu^(2+)의 농도와 s-BLM을 통과하는 전류 간의 상관 관계를 결정하기 위하여 사용되었다. 얻어진 상관관계는 선형을 보였으며 높은 재현성을 가졌다. Cu^(2+) 농도가 10~130 μM인 범위에서 Cu^(2+) 농도와 전류의 상관관계를 나타내기 위하여 보정 곡선을 구축하였다. 이 보정 곡선을 미지 시료의 Cu^(2+) 농도 측정에 사용하였다. 지지된 이중층 지질막이 구비된 마이크로플루이딕 시스템은 PDMS(polydimethyl siloxane)를 사용하여 전형적인 연질 포토리소그라피와 몰딩 기법으로 제작하였다. 집적된 마이크로플루이딕 시스템은 은 전선을 절단하지 않고도 은 표면을 활성화시키는 기능, 은 표면에 이중층 지질막을 피복하는 기능, KCl 완충 용액을 주입하는 기능, Cu^(2+)를 포함한 시료를 주입하는 기능, 시료 중의 Cu^(2+) 농도를 측정하는 기능 등 다중 기능을 가지도록 하였다.
A microfluidic system has been developed using biomaterial for the measurement of cupric ion concentration. The cell-membrane-mimicking bilayer lipid membrane(BLM)-coated silver electrode was used for the sensing of cupric ion concentration. The silver-supported BLM could increase its stability. A silver-supported bilayer lipid membrane(s-BLM) was easily obtained using its self-assembling characteristics by immersing silver wire into lipid(phosphatidylcholine; PC) solution and then dipping into aqueous KCl solution. These s-BLMs were used to determine the relationship between Cu^(2+) concentration and current crossing s-BLM. Their relationship showed high linearity and reproducibility. The calibration curve was constructed to express the relationship between Cu^(2+) concentration and current in the Cu^(2+) concentration range of 10 and 130 μM. This calibration curve was used to measure Cu^(2+) concentration in an unknown sample. Microfluidic system with s-BLM was made of PDMS(polydimethyl siloxane) using typical soft photolithography and molding technique. This integrated system has various functions such as activation of the silver surface without cutting silver wire, coating of BLM on silver surface, injection of KCl buffer solution, injection of Cu^(2+) sample and measurement of Cu^(2+) concentration in the sample.
[References]
  1. Rengaraj S, Kim Y, Joo CK, Choi K, Yi J, Korean J. Chem. Eng., 21(1), 187, 2004
  2. Prakorn R, Kwanta N, Ura P, Korean J. Chem. Eng., 21(6), 1212, 2004
  3. Somasundrum M, Bannister JV, Sens. Actuators B-Chem., 15, 203, 1993
  4. Bychkov E, Bruns M, Klewe-Nebenius H, Pfenning G, Raptis K, Hoffmann W, Ache HJ, Sens. Actuators B-Chem., 27, 384, 1995
  5. Ben Ali M, Lemiti M, Jaffrezic-Renault N, Martelet C, Chovelon JM, Ben Ouada H, Thin Solid Films, 383(1-2), 292, 2001
  6. Pandey PC, Sens. Actuators B-Chem, 54, 210, 1999
  7. Prakash R, Srivastava RC, Pandey PC, J. Solid State Electrochem. Curr. Res. Dev. Sci. Technol., 6, 203, 2002
  8. Barna K, Nagy G, J. Biochem. Biophys. Methods., 53, 177, 2002
  9. Dimitrios PN, Krull UJ, Anal. Chim. Acta, 288, 187, 1994
  10. Siontorou CG, Dimitrios NP, Krull UJ, Chiang KL, Anal. Chem., 69, 3109, 1997
  11. Krull UJ, Seethaler SL, Brennan JD, Nikolelis DP, Thin Solid Films, 244(1-2), 917, 1994
  12. Doe H, Surf. Sci., 95, 629, 2001
  13. Becucci L, Moncelli MR, Guidelli R, Langmuir, 19(8), 3386, 2003
  14. Tien HT, Ottova AL, Colloids Surf. A: Physicochem. Eng. Asp., 149, 217, 1999
  15. Siontorou CG, Nikolelis DP, Miernik A, Krull UJ, Electrochim. Acta, 43(23), 3611, 1998
  16. Katrivanos PL, Purnell AJ, Aleksandridis AA, Siontorou CG, White C, Laboratory Robotics and Automation, 10, 239, 1998
  17. Whitesides XY, George M, Annu. Rev. Mater. Sci., 28, 153, 1998
  18. Malaquin L, Carcenac F, Vieu C, Mauzac M, Microelectron. Eng., 61, 379, 2002
  19. Ottova AL, Tien HT, Bioelectrochem. Bioenergetics, 42, 141, 1997