| Issue |
Korean Chemical Engineering Research,
Vol.50, No.3, 582-587, 2012
Vol.50, No.3, 582-587, 2012
APP 핵제를 첨가한 PLA 필름의 등온결정화 특성에 관한 연구
Study on Isothermal Crystallization Characteristics of PLA Film by Adding APP as a Nucleation Agent
본 논문에서는 ammonium phosphate (APP)를 핵제로 사용한 PLA 필름에 대한 결정화 특성을 연구하였다. PLA 필름의 결정화도와 결정크기는 Scherrer 식을 이용하여 결정하였으며 결정화속도 상수는 Avrami 식을 이용하여 계산하였다. 본 연구에 사용한 시료는 2단계 과정을 거쳐 제조되었다. 먼저 APP를 1, 5, 10 wt% 첨가한 필름을 각각 제조하고 130, 140, 150 ℃에서 어닐링시켜서 시료로 사용하였다. 순수한 PLA 필름의 결정화도는 평균 4.6%였으며 APP를 1, 5, 10 wt% 첨가한 필름의 평균 결정화도는 각각 12.2, 47.7, 50.0%였다. 순수한 PLA 필름의 평균 결정크기는 28.0nm였으며 APP를 1, 5, 10 wt% 첨가한 필름의 평균 결정크기는 26.8, 24.0, 19.0 nm였다. APP를 1 wt% 첨가한 PLA 필름의 130, 140, 150 ℃ 어닐링 온도별 결정화속도 상수는 각각 2.12, 3.86, 0.27로, 140 oC에서 어닐링시킨 PLA 필름의 결정속도가 가장 빨랐으며 순수한 필름, 5, 10 wt% 첨가한 필름보다 높았다.
In this paper, it was studied on the crystallization characteristics of PLA film by adding ammonium phosphate (APP) as a nucleation agent. Crystallinity and crystallite size of PLA film were determined by Scherrer equation. Crystallization rate constant of PLA film was calculated through Avrami equation. Film samples in the study were prepared by two steps. PLA films were prepared by adding 1, 5, and 10 wt%, respectively, at first and was secondly annealed at 130,140, and 150 ℃. Crystallinity of pure PLA film was average 4.6% and those of PLA film with adding 1, 5, and 10 wt% APP were 12.2, 47.7, and 50.0%, respectively. Crystallite size of PLA film was average 28.0 nm and those of PLA film with adding 1, 5, and 10 wt% APP were 26.8, 24.0, and 19.0 nm, respectively. Crystallization rate constants of PLA film with 1 wt% APP were 2.12, 3.86, and 0.27 by annealing at 130, 140, and 150 ℃, respectively, where was higher than pure PLA film and those with adding 5 and 10 wt% APP, respectively.
[References]
- Yoon CS, Ji DS, Text. Sci. Eng., 43(5), 235, 2006
- Ray SS, Okamoto M, Macromol. Rapid Commun., 24(14), 815, 2003
- Drumright RE, Gruber PR, Henton DE, Adv. Mater., 12(23), 1841, 2000
- Lunt J, Polym. Degrad. Stabil., 59, 145, 1998
- Fang Q, Hanna MA, Ind. Crop.Prod., 10, 47, 1999
- Kawamoto N, Sakai A, Horikoshi T, Urushihara T, Tobita E, J. Appl. Polym. Sci., 103(1), 244, 2007
- Zhai WT, Ko Y, Zhu WL, Wong AS, Park CB, Int. J. Mol. Sci., 10(12), 5381, 2009
- Li HB, Huneault MA, Polymer, 48(23), 6855, 2007
- Harris AM, Lee EC, J. Appl. Polym. Sci., 107(4), 2246, 2008
- Suardana NPG, Min SK, Lim JK, Mater. Design., 32, 1990, 2011
- Shumao L, Jie R, Hua Y, Tao Y, Weizhong Y, Polym. Int., 59, 242, 2010
- Xiao H, Yang L, Ren X, Jiang T, Yeh JT, Polym.Composite., 31(12), 2057, 2010
- Xiao HW, Li P, Ren XM, Jiang T, Yeh JT, J. Appl. Polym. Sci., 118(6), 3558, 2010
- Kim J, Kim MS, Kim BW, Korean Chem. Eng. Res., 49(5), 611, 2011
- Yu L, Liu HS, Xie FW, Chen L, Li XX, Polym. Eng. Sci., 48(4), 634, 2008
- Fakirov S, Fischer EW, Hoffmann R, Schmidt GF, Poylmer., 18(11), 1121, 1977
- Rao YQ, Greener J, Avila-Orta CA, Hsiao BS, Blanton TN, Polymer, 49(10), 2507, 2008
- Papageorgiou GZ, Achilias DS, Bikiaris DN, Karayannidis GP, Thermochim. Acta, 427(1-2), 117, 2005
- Lim LT, Auras R, Rubino M, Prog. Polym. Sci., 33(8), 820, 2008
- Danilchenko SN, Kukharenko OG, Moseke C, Protsenko IY, Sukhodub LF, Sulkio-Cleff B, Crystal. Res. Technol., 37(11), 1234, 2002
- Du A, Koo D, Ziegler M, Cairncross RA, Polym. Physics., 49, 873, 2011
- Kim HC, Lee H, Kim HY, Pak PK, Lee BO, Polym.(Korea), 23(1), 25, 1999
[Cited By]
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.