| Issue |
Korean Chemical Engineering Research,
Vol.47, No.4, 476-480, 2009
Vol.47, No.4, 476-480, 2009
Li 이온 포함하는 PEO/PMMA 고분자 전해질의 제조 및 전기화학적 거동
Preparation and Electrochemical Behaviors of Polymer Electrolyte Based on PEO/PMMA Containing Li Ion
본 연구는 리튬 이차전지용 고분자 전해질 복합재료에 관한 것으로, 고분자는 poly(ethylene oxide)(PEO)와 poly(methyl methacrylate) (PMMA) 블렌드를 사용하고, 용매로는 Ethylene carbonate(EC), 그리고 LiClO4를 리튬염으로 하는 전해질 복합체 필름을 제조하였으며, PMMA의 함유량에 따른 고분자 전해질의 전기화학적 특성을 관찰하였다. 제조된 고분자 전해질의 결정화도와 이온전도도는 시차주사열량계(DSC)와 주파수반응분석기(FRA)로 분석하였다. 그 결과 PMMA의 함량을 증가시킴에 따라서, PEO의 결정 영역이 감소하고 이온전도도가 증가하였다. 또한, PMMA의 함량이 20 wt.% 이상인 경우, 고분자 블렌드필름에서 상분리되는 현상을 관찰하였다. 즉, SEM 분석결과에 의해서, PMMA 주
성분 영역과 PEO 주성분 영역의 구분이 가능하였다. 고분자 전해질의 이온전도도는 20 wt.% 첨가한 경우 가장 큰 이온전도도를 가지며, 함유량이 20 wt.% 이상에서는 PMMA 상의 증가로 인해 다소 감소된 이온전도도 변화를 나타내었다.
A polymer composite electrolyte of a blend of poly(methyl methacrylate)(PMMA) and poly(ethylene oxide) (PEO) as a host polymer, the ethylene carbonate as a solvent, and LiClO4 as a salt was studied. The crystallinity of the polymer electrolytes was evaluated using differential scanning calorimeter(DSC). The ionic conductivity of the polymer electrolytes was measured by frequency response analyzer(FRA) method. The effect of PEO/PMMA blend ratios on the ionic conduction in these electrolytes was investigated. The electrolyte films showed a phase separation due to immiscibility of the PMMA with the PEO. The PMMA-rich phase and the PEO-rich phase were produced during a film casting. The ionic conductivity of blend electrolyte was dependent on the content of PMMA and showed the highest value at 20 wt.%. However, when PMMA content exceeds 20 wt.%, the ionic conductivity was decreased due to the slow ionic transport through the PMMA-rich phase.
[References]
- Croce F, Gerace F, Dautzemberg G, Passerini S, Appetecchi GB, Scrosati B, Electrochim. Acta, 39(14), 2187, 1994
- Abraham KM, Choe HS, Pasquariello DM, Electrochim. Acta, 43(16-17), 2399, 1998
- Bohnke O, Frand G, Rezrazi M, Rousselot C, Truche C, Solid State Ion., 66, 105, 1993
- Christie AM, Vincent CA, J. Appl. Electrochem., 26(3), 255, 1996
- Southall JP, Hubbard HV, Johnston SF, Rogers V, Davies GR, McIntyre JE, Ward IM, Solid State Ion., 85(1-4), 51, 1996
- Tunemi K, Ohno H, Tsuchida E, Electrochem. Acta., 28, 833, 1983
- Pistoia G, Antonini A, Wang G, J. Power Sources., 58, 139, 1996
- Fenton DE, Parker JM, Wright PV, Polymer, 14, 589, 1973
- Gauthier M, Belanger A, Bouchard P, Kaper B, Richard S, Vassord G, Armand MM, Sanchez JY, Krause L, J. Power Sources, 54, 163, 1995
- Alloin F, Sanchez JY, Armand M, J. Electrochem. Soc., 141(7), 1915, 1994
- Leroux F, Goward G, Power WP, Nazar LF, J. Electrochem. Soc., 144(11), 3886, 1997
- Kweon JO, You JS, Noh ST, Korean Chem. Eng. Res., 42(6), 741, 2004
- Kim DW, J. Power Sources, 87(1-2), 78, 2000
- Meyer WH, Adv. Mater., 10(6), 439, 1998
- Song JY, Wang YY, Wan CC, J. Power Sources, 77(2), 183, 1999
- Tarascon JM, Armand MB, Nature, 414, 359, 2001
- Croce F, Appetechi GB, Persi L, Scrosati B, Nature, 394, 456, 1998
- Krejza O, Velicka J, Sedlaøikova M, Vondrak J, J. Power Sources, 178, 774, 2008
- Kumar B, Scanlon LG, Solid State Ion., 124(3-4), 239, 1999
- Jeon JD, Kim MJ, Kwak SY, J. Power Sources, 162(2), 1304, 2006
- Seo YJ, Cha JH, Lee H, Ha YJ, Koh JH, Lee C, Korean Chem. Eng. Res., 46(1), 170, 2008
- Harris CS, Rukavina TG, Electrochim. Acta, 40(13-14), 2315, 1995
- Gao L, Macdonald DD, J. Electrochem. Soc., 144(4), 1174, 1997
- Rietman EA, Kaplan ML, J. Polym. Sci., Part C: Polym. Lett., 28, 187, 1990
- Fang CP, Ying SK, Eur. Polym. J., 29, 799, 1993
- Cho BW, Kim DH, Lee HW, Na BK, Korean J. Chem. Eng., 24(6), 1037, 2007
- Kim S, Kang JY, Lee SG, Lee JR, Park SJ, Polym.(Korea), 29(4), 403, 2005
- Kim S, Hwang EJ, Jung YJ, Han MH, Park SJ, Colloids and Surfaces A: Physicochem. Eng. Aspects, 313, 216, 2008
- Wen ZY, Itoh T, Ikeda M, Hirata N, Kubo M, Yamamoto O, J. Power Sources, 90(1), 20, 2000
[Cited By]
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.