Print: | ISSN 0304-128X |
Online: | ISSN 2233-9558 |
Korean Chemical Engineering Research,
Vol.43, No.1, 80-84, 2005 융제 및 고분자 첨가 용액으로부터 분무 열분해 공정에 의해 합성한 Y2O3:Eu 형광체
Y2O3:Eu Phosphor Particles Prepared by Spray Pyrolysis from Solution Containing Flux and Polymeric Precursor
초음파 분무 열분해 공정에 의해 나노 크기의 Y2O3:Eu 형광체 분말들을 합성하였다. 고분자 전구체와 융제로 사용 되어진 리튬 탄산염이 나노 크기의 Y2O3:Eu 형광체의 형태 및 발광 특성에 미치는 영향에 대해 조사하였다. 고분자 전구체와 융체를 동시에 사용했을 때 분무 열분해 공정에 의해 제조된 구형의 마이크론 크기의 분말들은 고온의 후열 처리 과정에서 나노 크기의 분말로 전환되었다. Y2O3:Eu 형광체의 평균 크기는 분무용액에 첨가되어지는 고분자 전구체와 융제인 리튬 탄산염의 첨가량 및 분무 열분해 공정의 반응기 온도에 많은 영향을 받았다. 고농도의 고분자 전구체를 함유한 분무용액으로부터 고온의 반응기에서 합성되고 1,000 ℃ 이상에서 후열처리한 나노크기 Y2O3:Eu 분말들은 진공자외선 하에서 좋은 발광 특성을 나타내었으며, 고상 공정에 의해 합성된 상용의 Y2O3:Eu 형광체와 비슷한 발광 세기를 가졌다.
Nano-sized Y2O3:Eu phosphor particles were prepared by ultrasonic spray pyrolysis. The effect of polymeric precursor and lithium carbonate flux on the morphology and luminescence characteristics of nano-sized Y2O3:Eu phosphor particles was investigated. When using the spray solution containing both the polymeric precursor and the flux, the Y2O3:Eu particles with spherical shape and micron size were turned into nano-sized Y2O3:Eu phosphor particles during the post-treatment at high temperature. The mean size of Y2O3:Eu phosphor particles was affected by the contents of polymeric precursors and lithium carbonate flux, and preparation temperature. The as-prepared particles by spray pyrolysis at high temperature from solution containing high contents of polymeric precursors had good photoluminescence intensity under vacuum ultraviolet after post-treatment above 1,000 ℃. The prepared nano-sized Y2O3:Eu phosphor particles had comparable photoluminescence intensity under vacuum ultraviolet light with that of the commercial Y2O3:Eu phosphor particles prepared by solid state reaction method.
[References]
|