본 연구에서는 TiCl4/N2/H2/Ar을 출발물질로 하여 TiN 박막을 PECVD 공정으로 제조하는데 영향을 끼치는 변수에 대해서 1차원 분산모델을 이용하여 모사하고 실험결과와 비교하였다. 공정모사는 플라즈마 발생에 따른 반응물의 분해반응을 입력되는 R.F. power의 함수로 단순화 시키고, Si-wafer 위에서의 증착속도는 Langmuir-Hinshelwood-Hougen-Watson형의 속도식을 사용하였으며, 표면반응이 TiCl3또는 TiCl2로부터 시작되는 두 가지 반응경로에 대하여 모사하였다. 모사결과는 온도, 낮은 R.F. power의 영역에 대해서 제한적으로 실제 경향을 따르고 있음을 알 수 있었으며, 높은 R.F. power 영역과 조성변화에는 실제거동을 잘 표현하지 못함을 알 수 있었다.
Deposition rates for TiN films starting from the mixture of TiCl4/N2/H2/Ar in PECVD(Plasma Enhanced Chemical Vapor Deposition) reactor were simulated with 1-dimensional radial dispersion model and these results were compared with the experimental results. Plasma dissociative reaction parameters were expressive of a function of R.F. power only, and TiN deposition rates on Si wafer were estimated by assuming a Langmuir-Hinshelwood-Hougen-Watson(L.H.H.W.) mechanism. In considering the reaction mechanisms, surface reactions starting from TiCl3 or TiCl2 were evaluated, respectively. Calculated TiN deposition rates agreed with the experimental results for the changes of temperature, and low range R.F. power, but some discrepancy was found for the changes of H2/N2 ratio and high range R.F. power.