Issue
HWAHAK KONGHAK,
Vol.25, No.6, 586-592, 1987
팔라듐 담지촉매의 소결현상에 관한 연구
A Study on Sintering of Supported Palladium Catalysts
담체, 소결온도, 소결분위기를 바꾸어 가며 팔라듐 담지촉매의 소결실험을 행하였다. 담체는 γ-Al2O3와 SiO2를 사용했고, 소결온도는 500 ℃, 700 ℃를 택했으며 소결분위기는 수소(환원성 분위기) 및 산소(산화성 분위기)를 택했다.
소결에 따른 표면적의 변화는 수소 화학흡착법에 의해서 측정하였다.
실험결과 산화성 및 환원성 분위기 양쪽 모두 다 소결현상을 나타냈고 재분산현상은 나타나지 않았다. 소결속도는 담체보다 온도에 더 영향을 받았으며, 환원성 분위기보다는 산화성 분위기에서 소결이 더 빨리 일어났다. 본 실험 조건 하에서 소결은 초기(5시간 이내)에 빨리 일어났고 그 후는 느리게 나타났다.
소결속도식 dS/dt=-kSn에서 소결지수 n의 값은 500 ℃, H2분위기에서는 11∼12였고, O2분위기에서는 2∼7이였다. 또 700 ℃에서 H2 및 O2분위기에서 각각 2.5∼4 및 2∼2.5였다.
Sintering behavior of supported palladium catalysts was studied in hydrogen and oxygen atmospheres at 500 ℃ and 700 ℃. Palladium was supported on SiO2 and γ-Al2O3. Surface area changes of the sintered catalysts were characterized by H2 chemisorption.
At both atmospheres redispersion phenomena were not found. The sintering rate was severely affected by temperature. The effect of supporting material on the sintering rate was little appreciated. In O2 atmosphere palladium was sintered faster than in H2 one. Most of sintering was taken place in 5 hours.
In sintering rate equation of dS/dt=-kSn, the experimental results showed n to be 11∼12 in H2 atmosphere and 2∼7 in O2 atmosphere, respectively at 500 ℃, and 2.5∼4 in H2 and 2∼2.5 in O2 atmosphere at 700 ℃.