| Issue |
Korean Chemical Engineering Research,
Vol.54, No.6, 830-837, 2016
Vol.54, No.6, 830-837, 2016
불소화 메조페이스 핏치로 제조된 그라파이트 폼의 물리/화학적 특성
Physical-Chemical Properties of Graphite Foams Produced with Fluorinated Mesophase Pitch
그라파이트 폼의 압축강도를 향상시키기 위하여 메조페이스 핏치를 공기분위기에서 산화안정화 한 후 다양한 불소 부분압으로 처리하였다. 불소화 처리된 메조페이스 핏치의 불소/탄소 표면화학 조성은 불소 부분압에 따라서 약 23.75%~61.48%의 범위를 가진다. 불소화 메조페이스 핏치기반 그라파이트 폼의 압축강도는 겉보기 밀도의 증가에 비례하여 증가되었다. 불소/탄소 표면화학 조성이 35.93%의 값을 갖는 메조페이스 핏치로부터 제조된 그라파이트 폼의 압축강도는 최대 2.93 ± 0.06MPa의 값을 보여 주었으며, 이 값은 미처리된 메조페이스 핏치로부터 제조된 그라파이트 폼과 비교하여 27.95% 증가되었다. 이러한 결과는 표면에너지가 큰 불소 작용기로 인한 메조페이스 핏치간의 계면결합력이 그 압축강도를 증가시켰기 때문으로 여겨진다.
In order to improve the compressive strength of graphite foams (GFms), mesophase pitch (MP) was stabilized in air atmosphere and then fluorinated at different conditions. The Fluorine/Carbon (F/C) in surface-chemical contents of fluorinated MP has range of 23.75%~61.48% according to the different fluorine partial pressure. The compressive strengths of GFms prepared from fluorinated MP were increased in proportion to the apparent densities. The compressive strength of the GFm produced from MP with 35.93% of F/C (%) showed maximum value in 2.93 ± 0.06 MPa, which was increased up to 27.95% than that of the GFm prepared from un-fluorinated MP. This result was attributed that the interface bonding between of MPs due to fluorine functional groups with high surface energy helped to improve compressive strength of the GFm.
[References]
- Inagaki M, Qiu J, Guo Q, Carbon, 87, 128, 2015
- Klett J, Hardy R, Romine E, Walls C, Burchell T, Carbon, 38(7), 953, 2000
- Kim JH, Jeong E, Lee YS, J. Ind. Eng. Chem., 32, 21, 2015
- Lee S, Kim JH, Jeong E, Lee YS, Korean Chem. Eng. Res., 54(2), 268, 2016
- Jafari AJ, Kakavandi B, Kalantary RR, Gharibi H, Asadi A, Azari A, Babaei AA, Takdastan A, Korean J. Chem. Eng., 33(10), 2878, 2016
- Delabarre C, Guerin K, Dubois M, Giraudet J, Fawal Z, Hamwi A, J. Fluor. Chem., 126(7), 1078, 2005
- Zhang J, Shi J, Wu G, Guo X, Guo Q, Liu L, Carbon, 49(5), 1628, 2011
- Fujimoto H, Yoshikawa M, Mabuchi A, Maeda T, J. Fluor. Chem., 57(1-3), 65, 1992
- Mochida I, Korai Y, Ku CH, Watanabe F, Sakai Y, Carbon, 38(2), 305, 2000
- Li S, Guo Q, Song Y, Shi J, Liu L, Carbon, 48(4), 1312, 2010
- Kim DW, Kim JS, Korean Chem. Eng. Res., 53(6), 703, 2015
- Fischer L, Siemann U, Ruland W, Colloid Polym. Sci., 261(9), 744, 1983
- Lee YS, Rho JS, Prospect. Ind. Chem., 6(2), 33, 2003
- Li X, Basso MC, Braghiroli FL, Fierro V, Pizzi A, Celzard A, Carbon, 50(5), 2026, 2012
- Munoz E, Ruiz-Gonzalez ML, Seral-Ascaso A, Sanjuan ML, Gonzalez-Calbet JM, Laguna M, de la Fuente GF, Carbon, 48(6), 1807, 2010
- Sanchez-Coronado J, Chung DDL, Carbon, 41(6), 1175, 2003
- Straatman AG, Gallego NC, Thompson BE, Hangan H, Int. J. Heat Mass Transf., 49(11-12), 1991, 2006
- Kim JH, Lee S, Jeong E, Lee YS, Appl. Chem. Eng., 26(6), 706, 2015
- Pandey PK, Smitha P, Gajbhiye NS, J. Polym. Res., 15(5), 397, 2008
- Karthik M, Faik A, Doppiu S, Roddatis V, Aguanno BD, Carbon, 87, 434, 2015
- Hou C, Zhang Q, Li Y, Wang H, Carbon, 50(5), 1959, 2012
- Kim JH, Lee YS, J. Ind. Eng. Chem., 30, 127, 2015
- Lee SE, Kim D, Lee MY, Lee MK, Jeong E, Lee YS, Polym. Korea, 39(1), 114, 2015
- Park MS, Kim KH, Kim MJ, Lee YS, Colloids Surf. A: Physicochem. Eng. Asp., 490, 104, 2016
- Yoo BR, Park IJ, Jo SM, Hong HY, Polym. Sci. Technol., 21, 416, 2010
- Kim JH, Bae TS, Lee YS, Polym. Korea, 39(6), 925, 2015
- Kim JH, Kim DY, Jeong E, Lee YS, Appl. Surf. Sci., 360, 1009, 2016
- Lee S, Lee BJ, Trans. KIEE., 62(6), 782, 2013
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.