Issue
Korean Chemical Engineering Research
ISSN 0304-128X
Volume 44, Number 5
Korean Chem. Eng. Res. 44(5), 425-554
October, 2006
17 articles Entire volume, number list
425-434 반복학습제어를 기반으로 한 회분공정의 고급제어기법
Advanced Control Techniques for Batch Processes Based on Iterative Learning Control Methods

이광순
435-443 고폭화약 연구의 기술 분야
Basic Technologies for the Development of High Explosives

김현수
444-452 2성분계 {1,2-dichloropropane+2-(2-methoxyethoxy)ethanol 및 + 2-(2-ethoxyethoxy)ethanol}에 대한 298.15 K에서의 과잉몰엔탈피 및 과잉몰부피
Excess Molar Enthalpies and Excess Molar Volumes for the Binary Mixtures {1,2-dichloropropane+2-(2-methoxyethoxy)ethanol, and +2-(2-ethoxyethoxy)ethanol} at 298.15 K

김재원, 김문갑
453-459 D-tryptophan과 N-CBZ-D-phenylalanine의 분리에서 이온성 액체의 영향
Influence of Ionic Liquid for Separation of D-tryptophan and N-CBZ-D-phenylalanine

김은철, 정금주, Polyakova Y, 구윤모, 노경호
460-467 Zeolite 5A에서의 H2/CO/CO2 단성분 및 혼합성분의 흡착평형
Pure Gas Adsorption Equilibrium for H2/CO/CO2 and Their Binary Mixture on Zeolite 5A

안의섭, 장성철, 최도영, 김성현, 최대기
468-475 이산화탄소(CO2) 가스에 의한 케이크 여과속도의 향상
The Improvement of Cake Filtration Rate using CO2 Gas Saturation

임성삼, 송연민
476-482 바이폴라막 전기투석에 의한 유기산 회수에 관한 모델링
Modeling for the Recovery of Organic Acid by Bipolar Membrane Electrodialysis

김상헌, 이병철
483-488 Remote 플라즈마에서 위치 및 반응기체에 따른 PMMA의 식각 특성 분석
Influence of Loading Position and Reaction Gas on Etching Characteristics of PMMA in a Remote Plasma System

고천광, 이원규
489-497 국내탄용 미분탄 보일러의 순환유동층 전환에 따른 경제성 평가
Economic Feasibility of Conversion of the Pulverized Coal Firing Boiler using Korean Anthracite into a Circulating Fluidized Bed Boiler

이종민, 김동원, 김재성, 김종진, 김형석
498-504 고밀도 CHF3 플라즈마에서 바이어스 전압과 이온의 입사각이 Photoresist의 식각에 미치는 영향
Effects of Bias Voltage and Ion-incident Angle on the Etching of Photoresist in a High-density CHF3 Plasma

강세구, 민재호, 이진관, 문상흡
505-512 액체-입자 Swirling 유동층에서 유동입자 흐름 및 열전달 특성
Characteristics of Particle Flow and Heat Transfer in Liquid-Particle Swirling Fluidized Beds

손성모, 강석환, 강용, 김상돈
513-519 마이크로 칩 전기영동에 응용하기 위한 다결정 실리콘 층이 형성된 마이크로 채널의 MEMS 가공 제작
MEMS Fabrication of Microchannel with Poly-Si Layer for Application to Microchip Electrophoresis

김태하, 김다영, 전명석, 이상순
520-527 실리콘 산화막의 플라즈마 식각에 대한 표면반응 모델링
Surface Reaction Modeling for Plasma Etching of SiO2 Thin Film

임연호
528-534 플라즈마트론을 이용한 바이오가스 개질로부터 수소생산
Hydrogen Gas Production from Biogas Reforming using Plasmatron

김성천, 전영남
535-539 Li2ZrO3로 CO2 제거시 알칼리 첨가제 효과
Effects of Alkaline Additives on CO2 Removal by Li2ZrO3

박주원, 강동환, 조영도, 유경선, 이재구, 김재호, 한춘
540-546 파일럿 규모의 흐름반응기에서 유기 및 무기 첨가제가 질소산화물의 선택적 무촉매 환원반응에 미치는 영향
Effects of Organic and Inorganic Additives on Selective Non Catalytic Reduction Reaction of NOx in a Pilot Scale Flow Reactor

박수엽, 유경선, 이중기, 박영권
547-554 응집공정에서 발생하는 알루미늄 가수분해종 분포특성
Characteristic of Al(III) Hydrolysis Specie Distribution on Coagulation Process

송유경, 정철우, 황보봉형, 손인식