|
Total 133 articles [ 키워드: Liquid ] |
No. |
Article |
1 |
Korean Chemical Engineering Research, 61 (3), pp.446-455 (2023) 공기부양반응기 내에서의 액체순환속도를 위한 모델 A Model for Liquid Circulation Velocity in Airlift Reactors 최근호 |
2 |
Korean Chemical Engineering Research, 61 (2), pp.312-321 (2023) Effects of Geometry and Operating Fluid on the Expansion Behavior of Liquid-Solid Fluidized Beds Mohsen Mozafari-Shamsi, Alireza Malooze, Mohammad Sefid, et al. |
3 |
Korean Chemical Engineering Research, 60 (4), pp.473-477 (2022) 폐배터리 재활용 공정 폐액 중 리튬 회수를 위한 분리 기술 고찰 A review on Separation Technologies for Lithium Recovery from Waste Solutions in Recycling Process of Waste Battery 송대성, 김은규, Vu TT |
4 |
Korean Chemical Engineering Research, 60 (3), pp.452-458 (2022) 기-액 하이브리드 대기압 플라즈마 반응기 제작 및 특성 분석 Fabrication and Characterization of Gas-liquid Hybrid Reactor Equipped with Atmospheric Pressure Plasma 권흥수, 이원규 |
5 |
Korean Chemical Engineering Research, 60 (3), pp.468-471 (2022) Helical Ribbon Impeller의 중심축과 스트럿이 혼합성능에 미치는 영향 Effect of Helical Ribbon Impeller’s Center Shaft & Lateral Supporting Struts on Mixing Performance 고승태 |
6 |
Korean Chemical Engineering Research, 59 (4), pp.542-547 (2021) 저점도 액 통기 교반용 글라스라이닝 홈베이스 임펠러의 최적 형상 Optimum Geometry of Glass Lined HOMEBASE Impeller for Gas-Liquid System of Low Viscosity Liquid 고승태 |
7 |
Korean Chemical Engineering Research, 59 (2), pp.276-280 (2021) 왕복요동 교반조의 자유 표면에서의 산소흡수속도 Oxygen Transfer Rate from Liquid Free Surface in Reciprocally Shaking Vessel 고승태 |
8 |
Korean Chemical Engineering Research, 59 (2), pp.296-303 (2021) Cu-La-Al/honeycomb 촉매를 이용한 저독성 추진제 분해 Decomposition of Low-toxic Propellant by Cu-La-Al/honeycomb Catalysts 김문정, 유달산, 이정섭, et al. |
9 |
Korean Chemical Engineering Research, 57 (3), pp.313-320 (2019) Extraction/Separations of Cobalt by Supported Liquid Membrane: A Review Swain B, Shim HW, Lee CG |
10 |
Korean Chemical Engineering Research, 57 (1), pp.73-77 (2019) Phase Equilibrium of Binary Mixture for the (propylene oxide + 1-pentanol) System at Several Temperatures Kim JL, Kim HM, Park SI, et al. |
|
|