대면적 대기압 플라즈마 반응 장비를 플라즈마-용액 시스템에 적용하여 액상 내부에 잠입된 폴리프로필렌(PP) 필름의 표면손상 없이 관능기 도입 가능성을 탐색하였다. 액상으로 1-butyl-3- methylimidazolium tetrafluoroborate: [BMIM]+[BF4]^(-) 이온성 액체 수용액을 사용한 경우, 안정적으로 플라즈마를 발생시킬 수 있었다. PP 필름의 플라즈마 처리 결과, PP 표면에 다양한 산소 함유 관능기들이 도입되었음을 확인할 수 있었다. 플라즈마 처리 후 PP의 표면 자유에너지는 처리시간, 전압의 증가에 따라서 증가하며, 1.5M 이온성 액체 수용액 농도에서 가장 큰 값을 나타내었다. ATR-FTIR 분석 결과, 다양한 카르보닐 기(1,726 cm^(-1), 1,643 cm^(-1))와 하이드록시 기(3,100~3,500 cm^(-1))의 흡광도가 증가하였고, XPS 분석은 ATR-FTIR 분석 결과를 뒷받침하여 주었다.
We investigated the possibility of introducing functional groups without damaging surface polymeric chains through the treatment of a polypropylene(PP) film immersed in liquid phase using an atmospheric pressure plasma with large area. The ionic liquid of 1-butyl-3-methylimidazolium tetrafluoroborate: [BMIM]+[BF4]- was successfully applied for generating stable plasmas in the plasma-solution system. We successfully treated the film surface using the plasma-solution system and confirmed various oxygen-containing functional groups formed on the surface of PP film. The surface free energy of PP film was increased with increasing plasma treatment time and power. It also showed a maximum value at the PP sample treated in the ionic liquid solution of 1.5 M. ATR-FTIR analyses revealed the increase of various carbonyl groups(1,726 cm^(-1), 1,643 cm^(-1)) and OH groups(3,100~3,500 cm^(-1)) after plasma treatment
of PP film, and XPS also supported the ATR-FTIR result.
Myung SW, Yeom YH, Jang YM, Choi HS, Cho DC, J. Mate. Sci: Mater.Med., “Preparation of a Reticulated Polyurethane Foam Grafted with Poly(acrylic acid) through Atmospheric Pressure Plasma Treatment and its Lysozyme Immobilization”, 16, 745, 2005
Kwon OJ, Tang S, Myung SW, Lu N, Choi HS, Surf. Coat. Technol., “Surface Characteristics of Polypropylene Film Treated by an Atmospheric Pressure Plasma", 192, 1, 2005
Zhao Y, Tang S, Myung SW, Lu N, Choi HS, Polymer Testing., “Effect of Washing on Surface Free Energy of Polystyrene Plate Treated by RF Atmospheric Pressure Plasma", 25, 327, 2006
Tang S, Lu N, Wang JK, Ryu SK, Choi HS, J. Phys. Chem. C., “Novel Effects of Surface Modification on Activated Carbon Fibers Using a Low Pressure Plasma Treatment", 111, 1820, 2007
Tang S, Kwon OJ, Lu N, Choi HS, Surf. Coat. Technol., “Surface Characteristics of AISI 304L Stainless Steel After an Atmospheric Pressure Plasma Treatment", 195, 298, 2005
Tang S, Lu N, Myung SW, Choi HS, Surf. Coat. Technol., “Enhancement of Adhesion Strength between Two AISI 316 L Stainless Steel Plates through Atmospheric Pressure Plasma Treatment", 200, 5220, 2006
Ichiki T, Koidesawa T, Horiike Y, Plasma Sources Sci. Technol., “An Atmospheric-pressure Microplasma Jet Source for the Optical Emission Spectroscopic Analysis of Liquid Sample", 12, S16, 2003
Titov VA, Rybkin VV, Shikova TG, Ageeva TA, Golubchikov OA, Choi HS, Surf. Coat. Technol., 199, 231, 2005
Ishijima T, Hotta H, Sugai H, Sato M, Appl. Phys. Lett., “Multibubble Plasma Production and Solvent Decomposition in Water by Slotexcited Microwave Discharge", 91, 121501, 2007
Ryzhkov VA, Physica B., “Carbon Nanotube Production by a Cracking of Liquid Hydrocarbons", 323, 324, 2002
Kazuhiko H, Takeru O, Toshiro K, Rikizo H, J. Plasma Fusion Res., “Development of a Plasma Source Using Atmospheric-Pressure Glow Discharge in Contact with Solution", 81, 417, 2005
Kaneko T, Baba K, Hatakeyama R, Plasma Phys. Control. Fusion., “Gas-liquid Interfacial Plasmas: Basic Properties and Applications to Nanomaterial Synthesis", 51, 124011, 2009
Kaneko T, Baba K, Harada T, Hatakeyama R, Plasma Process. Polym., “Novel Gas-Liquid Interfacial Plasmas for Synthesis of Metal Nanoparticles", 6, 713, 2009
Choi HS, Rybkin VV, Titov VA, Shikova TG, Ageeva TA, Surf. Coat. Technol., “Comparative Actions of a Low Pressure Oxygen Plasma and an Atmospheric Pressure Glow Discharge on the Surface Modification of Polypropylene", 200, 4479, 2006