Issue
Total 73 articles [ 저자: Kim SH ]
No. Article
41 HWAHAK KONGHAK, 41 (1), pp.122-128 (2003)
폐윤활유 연속 주입식 열분해 반응기에서 생성되는 탄소 침적체의 특성
Characteristics of Deposited Carbon on the Pyrolysis Reactor Wall with Continuous Feeding of Waste Lubricating Oil

김관문, 김영석, 정성욱, et al.
42 HWAHAK KONGHAK, 40 (6), pp.735-740 (2002)
GPS(Glycidoxypropyl Trimethoxysilane)을 이용한 친수성 코팅 필름의 제조
Preparation of Hydrophilic Coating Film Using GPS(Glycidoxypropyl Trimethoxysilane)

박정국, 송기창, 강현욱, et al.
43 HWAHAK KONGHAK, 40 (5), pp.613-617 (2002)
코로나 방전처리에 의한 폴리이미드 필름의 표면 및 접착특성에 관한 연구
Surface and Adhesion Characteristics of Polyimide Film Treated by Corona Discharge

박수진, 조기숙, 김성현
44 HWAHAK KONGHAK, 40 (4), pp.411-414 (2002)
질산 인듐과 염화 주석으로부터 얻어진 인듐주석산화 분말의 합성에서 첨가제와 소성 조건의 영향
The Effect of Additive and Sintering Conditions in the Formation of ITO Powder Obtained from Indium Nitrate and Tin Chloride

김순회, 김기도, 김희택
45 HWAHAK KONGHAK, 40 (2), pp.196-202 (2002)
암모니아-물 기포분사형 흡수기의 물질전달 모사 및 실험 연구
The Study on Model Simulation and Experiment for Mass Transfer in Bubble Mode Absorber of Ammonia and Water

이재철, 이기봉, 전병희, et al.
46 HWAHAK KONGHAK, 40 (2), pp.274-279 (2002)
계면활성제를 이용한 흡수식 열펌프 성능향상에 관한 수치 해석 연구
Numerical Study for Performance Enhancement of Absorption Heat Pump by Surfactants

이찬호, 하종주, 이재철, et al.
47 HWAHAK KONGHAK, 40 (1), pp.50-56 (2002)
CMPO 미량 첨가에 따른 30% TBP/dodecane-HNO3 계에서의 Tc 추출 증진 및 Tc, Np, U의 선택적 공추출
Enhancement of Tc Extraction and Selective co-extraction of Tc, Np and U by Means of Adding a Small Amount of CMPO in 30% TBP/Dodecane-HNO3 System

이일희, 김수호, 김광욱, et al.
48 HWAHAK KONGHAK, 39 (6), pp.750-756 (2001)
슬러리 반응기에서 액상 디메틸에테르 합성의 물질 전달 해석
Analysis of Mass Transfer in a Slurry Reactor for Dimethyl Ether Synthesis

최정운, 이상호, 심규성, et al.
49 HWAHAK KONGHAK, 39 (6), pp.757-762 (2001)
반 회분식 반응기에서 polypropylene의 등온 및 비등온 열분해반응 특성
Isothermal and Non-isothermal Pyrolysis Characteristics of Polypropylene in Stirred Batch Reactor

김승수, 박찬진, 김성현
50 HWAHAK KONGHAK, 39 (5), pp.527-535 (2001)
연소합성을 이용한 탄화질화 티타늄 세라믹 제조에서의 연소특성
Combustion Characteristics for Producing Titanium Carbonitride Ceramics by Combustion Synthesis

김상환, 강태성, 김준봉, et al.
[1] [2] [3] [4] 5 [6] [7] [8]