Issue
Total 15 articles [ 저자: 한학수 ]
No. Article
1 Korean Chemical Engineering Research, 49 (1), pp.75-82 (2011)
금속코팅용 광경화 코팅필름의 물성에 대한 아크릴산(Acrylic acid)의 영향
Effect of Acrylic Acid on the Physical Properties of UV-cured Coating Films for Metal Coating

서종철, 최준석, 장의성, et al.
2 Korean Chemical Engineering Research, 48 (1), pp.45-52 (2010)
가교형 이미드 올리고머 제조 및 듀얼 오브너블 용기(Dual-Ovenable Packaging) 용 폴리에테르이미드에 대한 적용 연구
Preparation of crosslinkable imide oligomers and Applications in Polyether Imides for Dual-ovenable Packaging

서종철, 박수일, 최승혁, et al.
3 Korean Chemical Engineering Research, 43 (2), pp.305-312 (2005)
가교형 폴리우레탄이미드의 합성을 통한 잔류 응력 거동 측정 및 특성 분석
Resudual Stress Behavior and Characterization of Poly(urethane-imide) Crosslinked Networks

박미희, 양승진, 장원봉, et al.
4 Korean Chemical Engineering Research, 42 (6), pp.748-753 (2004)
다공성 활성탄소-실리카젤 복합전극의 전기용량적 탈이온 공정에의 응용
Applications of Porous Activated Carbon-Silica Gel Composite Electrodes for Capacitive Deionization Process

양천모, 최운혁, 조병원, et al.
5 HWAHAK KONGHAK, 38 (2), pp.249-254 (2000)
사슬 강직도에 따른 폴리이미드 박막의 수분 흡수 거동
Water Sorption Behaviors in the Polyimide Thin Films with Various Chain Rigidities

이안나, 서종철, 전종호, et al.
6 HWAHAK KONGHAK, 37 (3), pp.459-464 (1999)
p-Phenylene Diamine(p-PDA)을 이용한 고기능성 폴리이미드 박막의 water Sorption 거동
Water Sorption Behaviors in High Performance Polyimide Thin Films Based on p-Phenylene Diamine(p-PDA)

서종철, 이안나, 조영일, et al.
7 HWAHAK KONGHAK, 37 (2), pp.262-269 (1999)
비용매 유도 상전이법에 의한 비대칭 폴리이미드막 제조시 물리적 인자의 영향 및 기체투과특성
Effects of Physical Factors in Asymmetric Polyimide Membranes Preparation by Nonsolvent Induced Phase Inversion Method and Gas Permeation Properties

전경용, 김한성, 임재홍, et al.
8 HWAHAK KONGHAK, 37 (1), pp.64-71 (1999)
폴리이미드 박막의 잔류 응력과 응력 완화 현상
Residual Stresses and Relaxation Behaviors of Polyimides Thin Films

정현수, 황재욱, 조영일, et al.
9 HWAHAK KONGHAK, 36 (6), pp.887-895 (1998)
PolyHEMA Beads 제조에 관한 형태학적 연구
A Morphological Study on the Preparation of PolyHEMA Beads

임재홍, 장우진, 김한성, et al.
10 HWAHAK KONGHAK, 36 (5), pp.669-673 (1998)
Porogen 용액의 성분비가 PolyHEMA Beads의 형태학적 구조에 미치는 영향
The Effect of Porogen Solution Component Ratio on the Morphology of PolyHEMA Beads

임재홍, 박종호, 장순호, et al.
1 [2]