Articles & Issues

Language: korean

Conflict of Interest: In relation to this article, we declare that there is no conflict of interest.

Publication history: Received February 27, 2013
Accepted March 20, 2013
Available online June 3, 2013

This is an Open-Access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

All issues

PVdF-HFP와 실리카가 코팅된 실크 견직물의 분리막 특성과 이를 채용한 리튬이온전지의 충방전 특성

Separator Properties of Silk-Woven Fabrics Coated with PVdF-HFP and Silica and the Charge-Discharge Characteristics of Lithium-ion Batteries Adopting Them

오심건 이영기¹ 김광만^1† 이용민 김상헌 김용주 고장면^†

Seem Geon Oh Young-Gi Lee¹ Kwang Man Kim^1† Yong Min Lee Sang Hern Kim Yong Joo Kim Jang Myoun Ko^†

한밭대학교 화학생명공학과, 305-719 대전광역시 유성구 동서대로 125 ¹한국전자통신연구원 부품소재연구부문 전력제어소자연구실, 305-700 대전광역시 유성구 가정로 218

Department of Chemical and Biological Engineering, Hanbat National University, 125 Dongseodae-ro, Yuseong-gu, Daejon 305-719, Korea ¹Research Section of Power Control Devices, Electronics & Telecommunications Research Institute (ETRI), 218 Gajung-ro, Yuseong-gu, Daejon 305-700, Korea

Korean Chemical Engineering Research, June 2013, 51(3), 330-334(5)
https://doi.org/10.9713/kcer.2013.51.3.330

Download PDF

Abstract

실크 견직물 표면에 poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP)와 실리카 나노입자의 혼합물을 코팅한 분리막을 제조하고 분리막에 전해액을 함침시켜 리튬이온전지용 분리막 겸 전해질로 사용하기 위한 특성이 조사되었다. 코팅막의 제조 시에는 전해액이 침투할 수 있는 미세다공의 형성을 심화시키기 위해 dibutylphthalate (DBP) 가소제의 함량을 변화시키면서 코팅된 분리막의 이온전도도, 함습율, 전기화학적 안정성 등을 조사하였고, 이를 리튬이온전지에 탑재하여 여러 전류속도에 대한 충방전 특성도 함께 측정하였다. 결과적으로 실리카가 첨가되고 DBP를 40~50 wt% 사용하여 코팅된 실크 분리막이 가장 우수한 분리막 특성 및 고율 충방전 특성을 나타내었다. 이는 (i) 실크견직물의 우수한 내구성과 내열성 이외에 (ii) DBP에 의한 미세다공 형성, (iii) 실리카에 의한 함습율 향상 등에 의해_x000D_ 코팅막의 표면적 및 코팅된 분리막의 이온전도도가 크게 향상되었기 때문이다.

Mixtures of poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) and silica nanoparticles are coated on the surface of a silk fabrics separator. The coated separators are finally prepared by injecting an electrolyte solution and then characterized for use of lithium-ion battery separator/electrolyte. In the preparation, various contents of dibutylphthalate (DBP) as a plasticizer are used to enhance the formation of micropores within the coated membrane. The coated silk fabrics separators are characterized in terms of ionic conductivity, drenching rate, and electrochemical stability, and the charge-discharge profiles of lithium-ion batteries adopting the coated separators are also examined. As a result, the coated silk fabrics separator prepared using DBP 40~50 wt% and silica shows the superior separator properties and high-rate capability. This is due to (i) high sustainability of silk fabrics, (ii) the formation of micropores with the coated layer membrane by DBP, (iii) increase in drenching rate by silica nanoparticles to involve great enhancements in specific surface area and ionic conductivity.

Keywords

Silk Fabrics Silica Nanoparticle Dibutylphthalate Plasticizer Separator Properties Lithium-ion Battery

References

Park JH, Park W, Kim JH, Ryoo D, Kim HS, Jeong YU, Kim DW, Lee SY, J. Power Sources, 196(16), 7035 (2011)
Venugopal G, Moore J, Howard J, Pendalwar S, J. Power Sources, 77(1), 34 (1999)
Park JH, Cho JH, Park W, Ryoo D, Yoon SJ, Kim JH, Jeong YU, Lee SY, J. Power Sources, 195(24), 8306 (2010)
Jeong HS, Kim DW, Jeong YU, Lee SY, J. Power Sources, 195(18), 6116 (2010)
Jeong HS, Lee SY, J. Power Sources, 196(16), 6716 (2011)
Gohl EPG, Vilensky LD, Textile Science, 2nd Ed., Longman Cheshire (1980)
Sirichaisit J, Brookes VL, Young RJ, Vollrath F, Biomacromolecules, 4(2), 387 (2003)
Tarascon JM, Gozdz AS, Schmutz C, Shokoohi F, Warren PC, Solid State Ion., 86-88, 49 (1996)
Kim KM, Kim JC, Park NG, Ryu KS, Chang SH, J. Power Sources, 123(1), 69 (2003)
Croce F, Appetecchi GB, Persi L, Scrosati B, Nature., 394(6692), 456 (1998)
Capiglia C, Mustarelli P, Quartarone E, Tomasi C, Magistris A, Solid State Ion., 118(1-2), 73 (1999)
Kim KM, Ryu KS, Kang SG, Chang SH, Chung IJ, Macromol.Chem. Phys., 202(6), 866 (2001)
He XM, Shi Q, Zhou X, Wan CR, Jiang CY, Electrochim. Acta, 51(6), 1069 (2005)
Kim KM, Park NG, Ryu KS, Chang SH, J. Appl. Polym. Sci., 102(1), 140 (2006)
Kim KM, Kim JC, Ryu KS, Macromol. Chem. Phys., 208(8), 887 (2007)
Kim JC, Kim KM, Korean Chem. Eng. Res., 46(1), 131 (2008)
Jeong HS, Choi ES, Lee SY, Electrochim. Acta., 86, 317 (2012)
Jeong HS, Choi ES, Lee SY, Kim JH, J. Memb.Sci., 415-416, 513 (2012)
Wang Y, Travas-Sejdic J, Steiner R, Solid State Ion., 148(3-4), 443 (2002)
Stallworth PE, Fontanella JJ, Wintersgill MC, Scheidler CD, Immel JJ, Greenbaum SG, Gozdz AS, J. Power Sources, 81-82, 739 (1999)
Kim KM, Park NG, Ryu KS, Chang SH, Electrochim. Acta., 51(26), 563 (2006)
Kim KM, Kim JC, Ryu KS, Macromol. Mater. Eng., 291(12), 1495 (2006)
Christie AM, Christie L, Vincent CA, J. Power Sources, 74(1), 77 (1998)
Abraham KM, Jiang Z, Carroll B, Chem. Mater., 9(9), 1978 (1997)