Articles & Issues
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution
Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium,
provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
Articles in press
활성화된 바이오차(ABC)에 대한 메틸렌 블루 흡착의 물리화학적 매개변수 평가
Evaluation of Physicochemical Parameters in Methylene Blue Adsorption onto Activated Biochar (ABC)
Chebbi Rachid1
FADEL Ammar1†
Souifi Imane1
Salma Samidin2
Wan Nor Roslam Wan Isahak2
1Chemical and Environmental Process Engineering Laboratory, University of Biskra, industrial Chemistry, 1university of biskra industrial Chemical, 2Department of Chemical and Process Engineering, Faculty of Engineering and Built Department of Chemical and Process Engineering
In Press, Journal Pre-proof, Available online 1 February 2026
Abstract
환경 보존 및 보호에 대한 관심이 증가함에 따라 다양한 형태의 폐기물을 처리하기 위한 혁신적인 방법과 기술이 필요해졌습니다. 활성탄을 이용한 흡착은 폐수에서 오염 물질, 특히 메틸렌 블루를 제거하는 데 있어 잘 확립되고 유망한 접근 방식입니다. 본 연구는 바이오매스 기반 대추야자 씨앗에서 추출한 탄소 함량이 높은 흡착제를 개발하여 활성화된 바이오차(ABC)로 전환하는 것을 목표로 합니다. 활성화 온도, 활성화 중 질량 손실, 바이오차 입자 크기, 초기 메틸렌 블루 농도, 흡착 시간 및 흡착제 질량을 포함한 중요한 물리화학적 매개변수를 자세히 조사하여 흡착 용량에 미치는 영향을 확인했습니다. 활성화된 바이오차의 형태학적 구조와 작용기는 SEM, XRD, FTIR 기술을 사용하여 분석했습니다. 그 결과, ABC 생산을 위한 최적 활성화 온도는 1000°C이며, 99.15%의 효율과 19.83mg/g의 흡착 용량(qe)을 얻을 수 있었습니다. 효과적인 흡착 시간은 60분으로 결정되었으며, 흡착 효율은 96.16%, qe 값은 9.61mg/g를 달성했습니다.
The increasing focus on environmental preservation and protection necessitates innovative
methods and technologies to address various forms of waste . Adsorption using activated carbon is a well-established and promising approach for removing pollutants, particularly methylene blue, from wastewater. This study aims to develop a carbon-rich adsorbent derived from biomass-based date seeds and transform it into activated biochar (ABC). Important physicochemical parameters, including activation temperature , mass loss during activation, biochar particle sizes , initial methylene blue concentration, adsorption time, and adsorbent mass, were examined in detail to determine their effects on adsorption capacity. The activated biochar's morphological structure and functional groups were characterized using SEM, XRD, and FTIR techniques. The results revealed that the optimal activation temperature for producing ABC is 1000 °C, yielding 99.15

