Articles & Issues
- Conflict of Interest
- In relation to this article, we declare that there is no conflict of interest.
-
This is an Open-Access article distributed under the terms of the Creative Commons Attribution
Non-Commercial License (http://creativecommons.org/licenses/bync/3.0) which permits unrestricted non-commercial use, distribution, and reproduction in any medium,
provided the original work is properly cited.
Copyright © KIChE. All rights reserved.
Articles in press
전도성 고분자 Polyaniline-Polypyrrole의 폴리아로마틱 복합체로 개질된 샤프심 전극의 비효소적 글루코스 검출 성능
Non-enzymatic glucose sensing performance of a pencil graphite electrode modified with a polyaromatic composite of polyaniline-polypyrrole
송민정1†
1서경대학교 나노융합공학과
In Press, Journal Pre-proof, Available online 1 May 2026
Abstract
본 연구에서는 샤프심 전극(pencil graphite electrode; PGE)과 전도성 고분자 Polyaniline (PANI)와 Polypyrrole (PPy)의 폴리아로마틱 복합체를 접목하여 전극 소재를 개발하고 비효소적 글루코스에 대한 검출 성능을 분석하였다. PANI-PPy 복합체는 전처리된 PGE 표면에 전기화학적 중합법을 통해 직접 합성되었으며, 제작된 PANI/PPy/PGE 전극의 전기화학적 특성은 순환전압 전류법(CV)과 전기화학 임피던스(EIS) 분석법, 시간대전류법(CA)을 이용하여 분석되었다. π-전자가 풍부한 전도성 고분자 PANI와 PPy의 시너지 효과에 의해 효율적인 전자전달과 향상된 전도도, 넓은 유효면적 등 전기화학적 특성과 기계적 안정성이 향상되었다. 이런 특성들 덕분에 PANI/PPy/PANI 전극 기반의 비효소적 글루코스 센서는 저농도 선형 농도 구간(0.012 ~ 0.089 mM)과 고농도 구간(0.668 ~ 6.67 mM)에서 각각 682.76 μA/mM·cm2와 87.13 μA/mM·cm2의 감도를 보이며, 금속 사용 없이도 전기화학적 센싱 성능이 개선되었다. 본 연구를 기반으로 다양한 표면 개질을 통해 저비용, 고성능 일회용 전극 소재 및 센서 개발에 효과적으로 응용될 수 있을 것으로 기대된다.
We developed an electrode material by integrating a pencil graphite electrode (PGE) with a polyaromatic composite of conductive polymers polyaniline (PANI) and polypyrrole (PPy), and analyzed its detection performance for non-enzymatic glucose. The PANI-PPy composite was directly synthesized on the pretreated PGE surface via electrochemical polymerization. The electrochemical properties of the fabricated PANI/PPy/PGE electrode were analyzed using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). The synergistic effects of π-electron-rich conductive polymers PANI and PPy resulted in improved electrochemical properties such as efficient electron transfer, enhanced conductivity, large effective surface area, and improved electrochemical and mechanical stability. Due to these characteristics, the non-enzymatic glucose sensor based on the PANI/PPy/PANI electrode exhibited sensitivities of 682.76 μA/mM·cm2 and 87.13 μA/mM·cm2 in the low-concentration linear range (0.012 ~ 0.089 mM) and high-concentration range (0.068 ~ 6.67 mM), respectively. Consequently, the developed electrode demonstrated improved electrochemical sensing performance for non-enzymatic glucose detection without the use of metals. Based on this study, it is expected to be effectively applicable to the development of low-cost, high-performance disposable electrode materials and sensors through various surface modifications.

