The remediation of textile dying wastewater was carried out at ambient temperatures in a pilot-scale continuous stirred tank reactor by using the photo-Fenton oxidation process. The preliminary results suggest that the treatment system reached a steady state condition within 5-10 min after it was started up. By using a 2^(k) factorial design, the effects of various parameters on the removal efficiency of color, BOD and COD were identified under steady state conditions. The removal efficiencies of color and BOD were affected by the feed rate of H2O2 and Fe^(2+), whereas none of the parameters in the investigated ranges affected the removal efficiency of COD. Consequently, using univariate analysis to investigate higher parameter range values, the optimum conditions for treating textile wastewater were found to be 25 ml H2O2/min, 5 ml Fe^(2+)/min and 90 W UV-A power for 20 min. In addition, the removal of all pollutants was enhanced within the acidic pH range. Approximately 69.2, 99.4 and 48.5% of color, BOD and COD were removed, respectively. However, the concentration of TDS increased slightly during the treatment period due to the formation of new species or intermediate oxidation products. Nevertheless, all values of pollutants in the treated wastewater except COD were in the range of the standard values permitted for discharge into the environment.