Issue
Korean Journal of Chemical Engineering,
Vol.25, No.5, 1212-1220, 2008
Improvement of polymer electrolyte membrane by radiation-induced grafting of styrene onto FEP film with subsequent sulfonation
Poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) film was homogeneously and highly grafted by styrene monomer under simultaneous irradiation with an electron beam, whereas preirradiation with an electron beam was insufficient to accomplish a high degree of grafting without activation of the styrene monomer. Following its subsequent sulfonation, the styrene-grafted FEP film exhibited considerably higher values of both the IEC and IC and less methanol crossover than the Nafion membrane. The grafting of styrene onto the FEP polymer is thought to be initiated by the abstraction of F atoms from the CF3 groups in the polymeric structure. It was estimated that two sulfonic acid groups can be attached to the benzene ring of one styrene molecule. The profile of sulfur across the FEP film, which is related to the concentration profile of sulfonic acid groups inside the styrene-grafted FEP film, became more and more homogeneous over a period of several hours, due to the step by step diffusion of monomers into the film, eventually showing a high IC value of 0.25 S/cm in the case of the 125 μm thick FEP film, whereas Nafion 117 (125 μm thickness) exhibited an IC value of 0.12 S/cm.
[References]
  1. Savadogo O, J. New Mat. Electrochem. Syst., 1, 47, 1998
  2. Acres GJK, J. Power Sources, 100(1-2), 60, 2001
  3. Patri M, Hande VR, Phadnis S, Somaiah B, Roychoudhury S, Deb PC, Polym. Adv. Technol., 15, 270, 2004
  4. Miyake N, Wainright JS, Savinell RF, J. Electrochem. Soc., 148(8), A898, 2001
  5. Park HB, Lee YM, J. Korean Ind. Eng. Chem., 13(1), 1, 2002
  6. Xing PX, Robertson GP, Guiver MD, Mikhailenko SD, Wang KP, Kaliaguine S, J. Membr. Sci., 229(1-2), 95, 2004
  7. Inzelt G, Pineri M, Schultze JW, Vorotyntsev MA, Electrochim. Acta, 45(15-16), 2403, 2000
  8. Chen JH, Asano M, Yamaki T, Yoshida M, J. Membr. Sci., 269(1-2), 194, 2006
  9. Lappan U, Geiβle U, Uhlmann S, Nucl. Instrum. Methods Phys. Res. Sect. B-Beam Interact. Mater. Atoms, 236, 413, 2005
  10. Schmidt TJ, Simbeck K, Scherer GG, J. Electrochem. Soc., 152(1), A93, 2005
  11. Gupta B, Buchi FN, Scherer GG, Chapiro A, J. Membr. Sci., 118(2), 231, 1996
  12. Gupta B, Buchi FN, Scherer GG, J. Polym. Sci. A: Polym. Chem., 32(10), 1931, 1994
  13. Chen JH, Asano M, Yamaki T, Yoshida M, J. Membr. Sci., 256(1-2), 38, 2005
  14. Yamaki T, Kobayashi K, Asano M, Kubota H, Yoshida M, Polymer, 45(19), 6569, 2004
  15. Becker W, Bothe M, Schmidy-Naake G, die Angewandte Makromolekulare Chemie, 273, 57, 1999
  16. Gupta B, Chapiro A, Eur. Polym. J., 10, 1145, 1989
  17. Gupta B, Buchi FN, Scherer GG, Chapiro A, Polym. Adv. Technol., 5, 493, 1994
  18. Gupta B, Scherer GG, Chimia, 48, 127, 1994
  19. Nasef MM, Saidi H, Nor HM, J. Polym. Sci., 76, 220, 2000
  20. Liang GZ, Lu TL, Ma XY, Yan HX, Gong ZH, Polym. Int., 52, 1300, 2003
  21. Guta B, Buchi FN, Scherer GG, Solid State Ion., 61, 213, 1994
  22. Nasef MM, Saidi H, Nor HM, Foo OM, J. Appl. Polym. Sci., 78(14), 2443, 2000
  23. Kuver A, Vielstich W, J. Power Sources, 74(2), 211, 1998
  24. Ravikumar MK, Shukla AK, J. Electrochem. Soc., 143(8), 2601, 1996
  25. Carrette L, Friedrich KA, Stimming U, Fuel Cells, 1, 5, 2001
  26. Nasef MM, Zubir NA, Ismail AF, Khayet M, Dahlan KZM, Saidi H, Rohani R, Ngah TIS, Sulaiman NA, J. Membr. Sci., 268(1), 96, 2006
  27. Meyer G, Perrot C, Gebel G, Gonon L, Morlat S, Gardette JL, Polymer, 47(14), 5003, 2006