Issue
Korean Journal of Chemical Engineering,
Vol.25, No.4, 885-891, 2008
Effect of gas environment on properties of particles prepared by spray pyrolysis of metal nitrates
Particles in different states of oxidation were prepared by spray pyrolyses of aqueous solutions of silver and copper nitrates under different gas environments: air, nitrogen or mixture gas of 10 vol%H2-N2, respectively. Silver nitrate was converted to phase-pure silver at temperatures below 500 ℃ whose densification and crystallization were completed around 500 ℃, irrespective of the gas environment. On the other hand, phase-pure copper(II) oxide was formed from copper nitrate up to 1,000 ℃ with air, but below 800 ℃ with nitrogen, above which copper(I) oxide was produced. Phase-pure copper particles were obtained with the mixture gas at temperatures above 400 ℃. Copper(I) oxide was sintered and crystallized more easily than copper(II) oxide. The rates of the metallization, sintering and crystallization of copper were between those of silver and nickel.
[References]
  1. http://www.silverinstitute.org/, the Silver Institute, 45-55, 2004
  2. Addona T, Auger P, Celik C, Chen G, Nickel and copper powders for high capacitance MLCC manufacture, Passive Component Industry, Nov./Dec., 14-24, 1999
  3. Kodas TT, Hampden-Smith MJ, Aerosol processing of materials, Wiley-VCH, 299-306, 1999
  4. Kodas TT, Hampden-Smith MJ, Caruso J, Skamser DJ, Powell QH, Chandler CD, Nickel powders, methods for producing powders and devices fabricated from same, U.S. Patent, 6316100, 2001
  5. Nagashima K, Wada M, Kato A, J. Mater. Res., 5, 2828, 1990
  6. Stovic S, Ilic I, Uskokovic D, Mater. Lett., 24, 369, 1995
  7. Che SL, Takada K, Takashima K, Sakurai O, Shinozaki K, Mizutani N, J. Mater. Sci., 34(6), 1313, 1999
  8. Kang DJ, Kim SG, Kim HS, J. Mater. Sci., 39(18), 5719, 2004
  9. Kim KN, Kim SG, Powder Technol., 145(3), 155, 2004
  10. Pluym TC, Powell QH, Gurav AS, Ward TL, Kodas TT, Wang LM, Glickman HD, J. Aerosol Sci., 24, 383, 1993
  11. Yang SY, Kim SG, Powder Technol., 146(3), 185, 2004
  12. Lenggoro IW, Itoh Y, Iida N, Okuyama K, Mater. Res. Bull., 38, 1819, 2003
  13. Kang DJ, Ph.D. Dissertation, Chung Ang University, Seoul, 2003
  14. Majumdar D, Shefelbine TA, Kodas TT, J. Mater. Res., 11, 2861, 1998
  15. Ichinose N, Osaki Y, Kashu S, Introduction to Ultrafine Particle Technology (in Jap), Ohm Co, 29, 1988