Carbon nanotubes were deposited directly on SUS304 plates by PECVD with acetylene and hydrogen as precursors under various deposition conditions. Raman spectroscopy showed that carbon nanotubes were not fully graphitized at the deposition temperatures, 600 to 750 ℃, although defects decreased with increase of deposition temperature. SEM microscopy showed that carbon nanotubes were not straight, but their growth followed the tip growth model. Pretreatment of the substrate such as polishing and dipping in HF solution was required for the successful deposition. Using non-aqueous electrolyte we fabricated electrical double layer capacitance (EDLC) with SUS304 plates, on which carbon nanotubes were deposited, without any treatment, and measured charge/discharge characteristics. Discharge capacitance decreased with cycles from initial value of 128 F/g, but stabilized at 58 F/g after 50 cycles.
Bower C, Zhou O, Zhu W, Werder DJ, Jin S, Appl. Phys. Lett., 77, 830, 2000
Chen Y, Zhong LW, Yin JS, Johnson DJ, Prince RH, Chem. Phys. Lett., 272, 178, 1997
Choi YC, Shin YM, Lee YH, Lee BS, Appl. Phys. Lett., 76(17), 2367, 2000
Collins PG, Avouris P, "Nanotubes for Electronics," Scientific American, December Issue, 38, 2000
Conway BE, "Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications," Kluwer Academic/Plenum Publishers, New York, 1999