About The Journal
  Aims and Scope
  Editorial Board
  Submit a Manuscript 
  Subscription Information
  Guidelines for Publication
  Ethics
Articles & Issues
  Search
  Issue
  Online First
  KJChE on
For Authors
  Instructions to Authors
  Ethical Responsibilities of
  Authors in KJChE
  Ethics in Publishing
  Peer Review Process
  Author's Checklist
  Copyright Transfer Form
Contact us
 
 
 
Issue
Korean Journal of Chemical Engineering,
Vol.16, No.6, 804-809, 1999
Coal Combustion Characteristics in a Pressurized Fluidized Bed
Han KH, Park J, Ryu JI, Jin GT
The characteristics of emission and heat transfer coefficient in a pressurized fluidized bed combustor are investigated. The pressure of the combustor is fixed at 6 atm. and the combustion temperatures are set to 850, 900, and 950 degrees C. The gas velocities are 0.9, 1.1, and 1.3 m/s and the excess air ratios are 5, 10, and 20%. The desulfurization experiment is performed with limestone and dolomite and Ca/S mole ratios are 1, 2, and 4. The coal used in the experiment is Cumnock coat from Australia. All experiments are executed at 2 m bed height. In this study, the combustion efficiency is higher than 99.8% through the experiments. The heat transfer coefficient affected by gas velocity, bed temperature and coal feed rate is between 550-800 W/m(2) degrees C, which is higher than those of AFBC and CFBC. CO concentration with increasing freeboard temperature decreases from 100 ppm to 20 ppm. NOx concentration in flue gas is in the range of 5-130 ppm and increases with increasing excess air ratio. N2O concentration in flue gas decreases from 90 to 10 ppm when the bed temperature increases from 850 to 950 degrees C.
Keywords: Pressurized Fluidized Bed Combustion; Heat Transfer Coefficient; Flue Gas Emissions
[References]
  1. Allen D, Hayhurst AN, "The Reduction of Nitric Oxide by Carbon Monoxide in a Fluidized Bed," Conf. 11th On Fluidized Bed Combustion, London, December, 221, 1991
  2. Anthony EJ, Preto F, "Pressurized Combustion in FBC Systems," In Pressurized Fluidized Bed Combustion (Ed. Cuenca and Anthony), 80, 1995
  3. Devaru C, Kolar A, "Heat Transfer from a Horizontal Finned Tube Bundle in Bubbling Fluidized Beds of Small and Large Particles," Proc. of the 13th International Conf. on FBC, 461, 1995
  4. Grace JR, Can. J. Chem. Eng., 64, 353, 1986
  5. Johnsson JE, Fuel, 73, 1398, 1994
  6. Johnsson J, Dam-Johansen K, "Reduction of N2O over Char and Bed Material from CFBC," Proc. of the 13th International Conf. on FBC, 859, 1995
  7. Kim H, Park D, Korean J. Chem. Eng., 4(2), 143, 1987
  8. Lyngfet A, Leckner B, "The Effect of Reductive Decomposition of CaSO4 on Sulphur Capture in Fluidized Bed Boilers," Proc. of the 10th International Conf. on FBC, 675, 1989
  9. McCabe WL, Smith JC, "Unit Operations of Chemical Engineering," 3rd Edition, McGraw-Hill, 302, 1976
  10. McClung JD, Provol SJ, Morehead HT, Dodd AM, "The Lakeland Mclntosh Unit 4 Demonstration Project Utilizing Foster Wheeler's Pressurized Circulating Fluidized-Bed Combustion Technology," Proc. of the 14th International Conf. on FBC, 79, 1997
  11. Mcdonald DK, Anderson J, "Comparison of Bubbling and Circulating Pressurized Fluidized Bed Combustion," Proc. of the 12th International Conf. on FBC, 555, 1993
  12. Miller CL, "Commercialization and Future Role of Pressurized Bed Combustion as a Clean Coal Technology," International Clean Coal Technology Symposium on PFBC, July 26-28, Kitakyusyu, Japan, 65, 1994
  13. Moritomi H, "Pressurized Fluidized Bed Combustion," APEC CCT Training Course, Sydney, Nov., 1994
  14. Podolski WF, Miller SA, Vogel GJ, Gehl SM, Hanway JE, Henry RF, Smyk EB, Swift WM, Parker KM, Graves RL, Griffin FP, Lackey ME, "Pressurized Fluidized Bed Combustion Technology," Noyes Data Corporation, 272, 1983
  15. Sarofim AF, "Fluidized Bed Combustion and Emission Control Issues," International Clean Coal Technology Symposium on PFBC, July 26-28, Kitakyusyu, Japan, 11, 1994
  16. Shun D, Bae DH, Han KH, Son JE, Kang Y, Wee YH, Lee JS, Ji PS, HWAHAK KONGHAK, 34(3), 321, 1996
  17. Tomuro J, Hokari N, Miyamoto T, Yoshii Y, Oki K, "Reduction of NO During Load Change Through the Operations of a 2MWth PFBC Unit," Proc. of the 11th International Conf. on FBC, 97, 1995
  18. Wallman PH, Carlsson RCJ, "Fluidized Bed Combustion Kinetics at Elevated Pressures," Proc. of the 11th International Conf. on FBC, 1517, 1991
  19. Wedel G, Krein J, Mollenhoff H, Rehwinkel H, Winkler K, "Pressurized Fluidized Bed Combustion in a 15MWth Test Facility Bubbling and Circulating Experience and Future Development," Proc. of the 12th International Conf. on FBC, 403, 1993
[Cited By]
  1. Han KH, Song YS, Ryu JI, Son JE, Jin GT, HWAHAK KONGHAK, 41(1), 86, 2003
  2. Lin CL, Wey MY, Korean Journal of Chemical Engineering, 20(6), 1123, 2003
  3. Chen HC, Zhao CS, Li YW, Lu DF, Korean Journal of Chemical Engineering, 24(5), 906, 2007
  4. Han KH, Hyun JS, Choi WK, Lee JS, Korean Chemical Engineering Research, 47(5), 580, 2009
참고문헌정보(참고문헌, 인용문헌)는 화학공학소재연구정보센터에 의해 제공되고 있습니다.