|
Total 171 articles [ 키워드: Modeling ] |
No. |
Article |
1 |
Korean Journal of Chemical Engineering, 40 (12), pp.2787-2799 (2023) Study of the influence of operational parameters on biomass conversion in a pyrolysis reactor via CFD Alysson Dantas Ferreira, Suzana Dantas Ferreira, Severino Rodrigues de Farias Neto |
2 |
Korean Journal of Chemical Engineering, 40 (12), pp.2929-2940 (2023) Polymeric membranes for the oxygen enrichment of air in sulfur recovery units: Prevention of catalyst deactivation through BTX reduction Seyed Heydar Rajaee Shooshtari, Kiarash Bastani, Hamidreza Eslampanah |
3 |
Korean Journal of Chemical Engineering, 40 (11), pp.2632-2645 (2023) Microkinetic study of syngas conversion to dimethyl ether over a bifunctional catalyst: CZA/FER Jiyeong Cho, Jongmin Park, Hyun Seung Jung, et al. |
4 |
Korean Journal of Chemical Engineering, 40 (11), pp.2671-2682 (2023) Modeling of heterogeneous fenton process using catalyst produced from date palm waste for dye removal: Catalyst characterization and process optimization Faeze Moslemi, Mohammad Hassan Ehrampoush, Mohammad Mehralian, et al. |
5 |
Korean Journal of Chemical Engineering, 40 (11), pp.2708-2715 (2023) A novel approach to measuring fluid saturation using X-ray computed tomography Sobhan Sheikhi, Alexander Burukhin, Alexey Cheremisin |
6 |
Korean Journal of Chemical Engineering, 40 (10), pp.2407-2418 (2023) A data-based scheduling methodology for constructing hydrogen refueling stations Soo Hwan Kim, Jun-Hyung Ryu |
7 |
Korean Journal of Chemical Engineering, 40 (10), pp.2572-2580 (2023) CFD modeling of a multichannel Fischer-Tropsch reactor module with microscale cooling channels: Effects of mirrored structure cooling layers Yesol Woo, Da Bin Oh, Jae Eun Park, et al. |
8 |
Korean Journal of Chemical Engineering, 39 (12), pp.3179-3189 (2022) Objectives, challenges, and prospects of batch processes: Arising from injection molding applications Zhou Y, Cao Z, Lu J, et al. |
9 |
Korean Journal of Chemical Engineering, 39 (12), pp.3204-3213 (2022) Process modeling of syngas conversion to ethanol and acetic acid via the production of dimethyl ether and its carbonylation Kim SW, Jung HS, Lee WB, et al. |
10 |
Korean Journal of Chemical Engineering, 39 (7), pp.1673-1687 (2022) Study of gradual and sudden operating condition variations to optimize energy and mass consumption of an industrial fluidized catalytic cracking (FCC) unit with a high-efficiency regenerator Yaghoubi K, Gilani N, Abghari SZ, et al. |
|
|