|
Korean Journal of Chemical Engineering, Vol.22, No.2, 208-213, 2005
Simultaneous Removal of SO2 and NO by Sodium Chlorite Solution in Wetted-Wall Column
The effect of feeding rate of NaClO2 solution, inlet SO2 and NO concentration, [NaClO2]/[SO2+NO] molar ratio ( η), L/G ratio and, solution pH on the simultaneous removal of SOx/NOx has been investigated in a wetted-wall column. Both SOx and NOx removal efficiencies are enhanced with the increasing feeding rate of NaClO2 solution and attain a steady state. NOx removal efficiency increases with increasing SO2 concentration, but SOx removal remains unaffected with increasing NO concentration. In an acidic medium, DeSOx and DeNOx efficiency increased with increasing [NaClO2]/[SO2+NOx] molar ratio and attained a steady state. NOx removal starts only after the complete removal of SOx. The excess of NaClO2 does not enhance NOx removal efficiency. Solution pH does not affect the DeSOx and DeNOx efficiency. The maximum SOx and NOx removal efficiencies achieved at the typical operating conditions of commercialized FGD processes are about 100 and 67%, respectively.
[References]
- Adewuyi YG, He XD, Shaw H, Lolertpihop W, Chem. Eng. Commun., 174, 21, 1999
- Brogren C, Karlsson HT, Bjerle I, Chem. Eng. Technol., 20(6), 396, 1997
- Brogren C, Karlsson HT, Bjerle I, Chem. Eng. Technol., 21(1), 61, 1998
- Chien T, Chu H, J. Hazard. Mater., B80, 43, 2000
- Chu H, Chien TW, Li SY, The Science of the Total Environment, 275, 127, 2001
- Cooper CD, Alley FC, Air Pollution Control: A Design Approach, 2nd Ed., Waveland Press, Inc., Illinois, 454, 1994
- de Paiva JL, Kachan GC, Ind. Eng. Chem. Res., 37(2), 609, 1998
- Deshwal BR, Jo HD, Lee HK, Can. J. Chem. Eng., 2003
- Feng XB, Hall WK, Catal. Lett., 41(1-2), 45, 1996
- Harriott P, Smith K, Benson LB, Environ. Prog., 12, 110, 1993
- Heck MH, Farrauto RJ, Catalytic Air Pollution Control: Commercial Technology, Van Nostrand Reinhold, New York, 1995
- Hsu HW, Lee CJ, Chou KS, Chem. Eng. Commun., 170, 67, 1998
- Kieffer RG, Gordon G, Inorg. Chem., 7, 239, 1968
- Lancia A, Musmarra D, Pepe F, Ind. Eng. Chem. Res., 36(1), 197, 1997
- Littlejohn D, Chang SG, Ind. Eng. Chem. Res., 29, 1420, 1990
- Littlejohn D, Wang Y, Chang SG, Environ. Sci. Technol., 27, 2161, 1993
- Lyon RK, Environ. Sci. Technol., 21, 231, 1987
- Perlmutter H, Ao H, Shaw H, Environ. Sci. Technol., 27, 128, 1993
- Sada E, Kumazawa H, Kudo I, Kondo T, Chem. Eng. Sci., 33, 315, 1978
- Shen CH, Rochelle GT, Environ. Sci. Technol., 32, 1994, 1998
- Shi Y, Wang H, Chang SG, Environ. Prog., 16, 301, 1997
- Takeuchi H, Ando M, Kizawa N, Ind. Eng. Chem. Process Des. Dev., 16, 303, 1978
- Takeuchi H, Yamanaka Y, Ind. Eng. Chem. Process Des. Dev., 17, 389, 1978
- Yang CL, Shaw H, Environ. Prog., 17, 80, 1998
- Yang CL, Shaw H, Perlmutter HD, Chem. Eng. Commun., 143, 23, 1996
[Cited By]
- Bo Z, Yan L, Yuqun Z, Huiling T, Xiaowen Z, Changhe C, Korean Journal of Chemical Engineering, 24(3), 471, 2007
- Park HH, Lim CW, Jo HD, Choi WK, Lee HK, Korean Journal of Chemical Engineering, 24(4), 693, 2007
- Jung SH, Jeong GT, Lee GY, Cha JM, Park DH, Korean Journal of Chemical Engineering, 24(6), 1064, 2007
- Li T, Zhuo Y, Lei J, Xu X, Korean Journal of Chemical Engineering, 24(6), 1113, 2007
- Xu W, Tong H, Chen C, Xu X, Korean Journal of Chemical Engineering, 25(1), 53, 2008
- Park HH, Jo HD, Kim IW, Lee HK, Korean Chemical Engineering Research, 46(3), 521, 2008
- Lee KM, Byun YC, Koh DJ, Shin DN, Kim KT, Ko KB, Cho MH, Namkung W, Mok YS, Korean Chemical Engineering Research, 46(5), 988, 2008
- Tan H, Wei J, Luo Y, Yu P, Korean Journal of Chemical Engineering, 27(3), 848, 2010
- Rutto H, Enweremadu C, Korean Journal of Chemical Engineering, 29(1), 1, 2012
- Park HW, Uhm SH, Applied Chemistry for Engineering, 28(6), 607, 2017
|