|
Korean Journal of Chemical Engineering, Vol.24, No.3, 512-517, 2007
Thermogravimetric study of coal and petroleum coke for co-gasification
As a preliminary study of gasification of coal and petroleum coke mixtures, thermogravimetric analyses were performed at various temperatures (1,100, 1,200, 1,300, and 1,400 oC) and the isothermal kinetics were analyzed and compared. The activation energies of coal, petroleum coke and coal/petroleum coke mixture were calculated by using both a shrinking core model and a modified volumetric model. The results showed that the activation energies for the anthracite and petroleum coke used in this study were 9.56 and 11.92 kcal/mol and reaction times were 15.8 and 27.0 min. In the case of mixed fuel, however, the activation energy (6.97 kcal/mol) and reaction time (17.0 min) were lower than the average value of the individual fuels, confirming that a synergistic effect was observed in the coprocessing of coal and petroleum coke.
[References]
- Heek KH, Strobel BO, Wanzl W, Fuel, 73, 1135, 1994
- Higman C, Burgt M, Gasification, Elsevier, New York, 2003
- Lee SH, Choi KB, Lee JG, Kim JH, Korean J. Chem. Eng., 23(4), 576, 2006
- Wang J, Anthony EJ, Abanades JC, Fuel, 83, 1341, 2004
- Ahn YK, Fischer WH, Int. J. Hydrog. Energy, 11(12), 783, 1986
- Gersten J, Fainberg V, Hetsconi G, Shidler Y, Fuel, 79, 1679, 2000
- Jones JM, Kubacki M, Kubica K, Ross AB, Williams A, J. Anal. Appl. Pyrolysis, 74, 502, 2005
- Moghtaderi B, Meesri C, Wall TF, Fuel, 83, 745, 2004
- Suelves I, Moliner R, Lazaro MJ, J. Anal. Appl. Pyrolysis, 55, 29, 2000
- Ahmaruzzaman M, Sharma DK, J. Anal. Appl. Pyrolysis, 73, 263, 2005
- Ndaji FE, Rllyatt WAT, Malik AA, Thomas KM, Fuel, 78, 301, 1999
- Audeh CA, Yan TY, Ind. Eng. Chem. Res., 26, 2419, 1987
- Levenspiel O, Chemical Reaction Engineering, 3rd ed., John Wiley & Sons Inc., 1999
- Ishida M, Wen CY, Chem. Eng. Sci., 26, 031, 1971
- Kasaoka S, Skata Y, Tong C, Intern. Chem. Eng., 25, 160, 1985
[Cited By]
- Yoon SJ, Choi YC, Hong JC, Ra HW, Lee JG, Korean Chemical Engineering Research, 46(3), 561, 2008
- Liu QY, Bei YL, Qi GB, Ding YJ, Korean Journal of Chemical Engineering, 25(5), 980, 2008
- Kanturk A, Sari M, Piskin S, Korean Journal of Chemical Engineering, 25(6), 1331, 2008
- Yoon SJ, Choi YC, Lee SH, Lee JG, Journal of the Korean Industrial and Engineering Chemistry, 20(1), 62, 2009
- Yoon SJ, Choi YC, Lee JG, Korean Journal of Chemical Engineering, 26(5), 1259, 2009
- Kook JW, Shin JH, Gwak IS, Lee SH, Applied Chemistry for Engineering, 26(2), 184, 2015
- Gwak IS, Hwang JH, Lee SH, Applied Chemistry for Engineering, 27(2), 171, 2016
- Shin JH, Lee LS, Lee SH, Korean Chemical Engineering Research, 54(4), 501, 2016
- Kim JH, Kim GM, Lisandy KY, Jeon CH, Korean Journal of Chemical Engineering, 34(11), 2852, 2017
- Kook JW, Gwak IS, Gwak YR, Seo MW, Lee SH, Korean Journal of Chemical Engineering, 34(12), 3092, 2017
|