|
Korean Journal of Chemical Engineering, Vol.33, No.9, 2747-2755, 2016
Synthesis of metal organic framework (MOF-5) with high selectivity for CO2/N2 separation in flue gas by maximum water concentration approach
Water plays a crucial role in the synthesis mechanism of metal organic framework-5 (MOF-5). Synthesized MOF-5 with good phase structure and large specific surface area is largely determined by an important synthesis factor: the total water concentration of the initial synthesis solution (Ctw). An understanding of the effects of different and high Ctw on the synthesis of MOF-5 and the investigation of the maximum Ctw suitable for the synthesis of MOF-5 are important to guide the synthesis of MOF-5. Through the research of the maximum Ctw, a favorable synthetic approach was established which could realize the synthesis of MOF-5 with fine performance on CO2 adsorption and separation. The research results show that the maximum Ctw could be as high as 1,440mmol/L, and synthesized MOF-5 still has a good phase structure and a large specific surface area of 2,136m2/g (BET). Synthesized MOF-5 by the maximum Ctw exhibits a high CO2 adsorption capacity of 2.5mmol/g and a low N2 adsorption capacity of 0.2mmol/g at 298 K and 100 kPa. More importantly, synthesized MOF-5 by the maximum Ctw exhibits a high selectivity for CO2/N2 of 18-22 at 298 K and 20-130 kPa in simulated flue gas.
[References]
- Furukawa H, Ko N, Go YB, Aratani N, Choi SB, Choi E, Yazaydin AO, Snurr RQ, O'Keeffe M, Kim J, Yaghi OM, Science, 329(5990), 424, 2010
- Deng HX, Doonan CJ, Furukawa H, Ferreira RB, Towne J, Knobler CB, Wang B, Yaghi OM, Science, 327(5967), 846, 2010
- Zhou X, Zhang Y, Yang XG, Zhao LZ, Wang GY, J. Mol. Catal. A-Chem., 361, 12, 2012
- Munn AS, Clarkson GJ, Millange F, Dumont Y, Walton RI, Cryst. Eng. Commun., 15, 9679, 2013
- Kent CA, Liu DM, Ito A, Zhang T, Brennaman MK, Meyer TJ, Lin WB, J. Mater. Chem. A, 1, 14982, 2013
- Yoon HC, Rallapalli PBS, Han SS, Beum HT, Jung TS, Cho DW, Ko M, Kim JN, Korean J. Chem. Eng., 12, 2501, 2015
- Kaye SS, Dailly A, Yaghi OM, Long JR, J. Am. Chem. Soc., 129(46), 14176, 2007
- Millward AR, Yaghi OM, J. Am. Chem. Soc., 127(51), 17998, 2005
- Eddaoudi M, Kim J, Rosi N, Vodak D, Wachter J, O’Keeffe M, Yaghi OM, Science, 295, 469, 2002
- Drummond ML, Cundari TR, Wilson AK, J. Phys. Chem. C, 117, 14717, 2013
- Kong XQ, Deng HX, Yan FY, Kim J, Swisher JA, Smit B, Yaghi OM, Reimer JA, Science, 341(6148), 882, 2013
- Tsao CS, Yu MS, Chung TY, Wu HC, Wang CY, Chang KS, Chen HL, J. Am. Chem. Soc., 127, 15997, 2009
- Hafizovic J, Bjorgen M, Olsbye U, Dietzel PDC, Bordiga S, Prestipino C, Lamberti C, Lillerud KP, J. Am. Chem. Soc., 129(12), 3612, 2007
- Hausdorf S, Wagler J, Mossig R, Mertens FORL, J. Phys. Chem. A, 112, 7567, 2008
- Rowsell JLC, Spencer EC, Eckert J, Howard JAK, Yaghi OM, Science, 309, 1350, 2005
- Gadipelli S, Guo Z, Chem. Mater., 26, 6333, 2014
- Zhao ZX, Li Z, Lin YS, Ind. Eng. Chem. Res., 48(22), 10015, 2009
- Zhao ZX, Ma XL, Kasik A, Li Z, Lin YS, Ind. Eng. Chem. Res., 52(3), 1102, 2013
- Yaghi OM, Eddaoudi M, Li H, Kim J, Rosi N, United States Patent, No., 2003/0004364 A1 (2003).
- Hausdorf S, Baitalow F, Seidel J, Mertens FORL, J. Phys. Chem. A, 111(20), 4259, 2007
- Yaghi OM, Li QW, MRS Bull., 34, 682, 2009
- Walton KS, Millward AR, Dubbeldam D, Frost H, Low JJ, Yaghi OM, Snurr RQ, J. Am. Chem. Soc., 130(2), 406, 2008
- Saha D, Bao Z, Jia F, Deng S, Environ. Sci. Technol., 44, 1820, 2010
- Karra JR, Walton KS, J. Phys. Chem. C, 114, 15735, 2010
- Liu B, Smit B, Langmuir, 25(10), 5918, 2009
- Keskin S, Sholl DS, Ind. Eng. Chem. Res., 48(2), 914, 2009
- Zhang L, Hu YH, Mater. Sci. Eng. B-Solid State Mater. Adv. Technol., 176, 573, 2011
- Li HH, Shi W, Zhao KN, Li H, Bing YM, Cheng P, Inorg. Chem., 51(17), 9200, 2012
- Rosi NL, Kim J, Eddaoudi M, Chen BL, O'Keeffe M, Yaghi OM, J. Am. Chem. Soc., 127(5), 1504, 2005
- Wong-Foy AG, Matzger AJ, Yaghi OM, J. Am. Chem. Soc., 128(11), 3494, 2006
- Baran P, Zarebska K, Bukowska M, Energy Fuels, 29(3), 1899, 2015
- Sudibandriyo M, Pan ZJ, Fitzgerald JE, Robinson RL, Gasem EAM, Langmuir, 19(13), 5323, 2003
- Mohammad SA, Chen JS, Fitzgerald JE, Robinson RL, Gasem KAM, Energy Fuels, 23(1), 1107, 2009
- Mohammad SA, Arumugam A, Robinson RL, Gasem KAM, Energy Fuels, 26(1), 536, 2012
- Wu Q, Zhou L, Wu JQ, Zhou YP, J. Chem. Eng. Data, 50(2), 635, 2005
- Remy T, Peter SA, Perre SV, Valvekens P, Vos DED, Baron GV, Denayer JFM, J. Phys. Chem. C, 117, 9301, 2013
- Ming Y, Purewal J, Yang J, Xu CC, Soltis R, Warner J, Veenstra M, Gaab M, Muller U, Siegel DJ, Langmuir, 31(17), 4988, 2015
- Li H, Eddaoudi M, O’Keeffe M, Yaghi OM, Nature, 402, 276, 1999
- Eddaoudi M, Li HL, Yaghi OM, J. Am. Chem. Soc., 122(7), 1391, 2000
[Cited By]
- Chung MG, Yoo KS, Applied Chemistry for Engineering, 30(5), 615, 2019
- Sun B, Bilal M, Jia S, Jiang Y, Chi J, Korean Journal of Chemical Engineering, 36(12), 1949, 2019
- Kim MB, Kim TH, Yoon TU, Kang JH, Kim JH, Bae YS, Journal of Industrial and Engineering Chemistry, 84, 179, 2020
|