|
Korean Journal of Chemical Engineering, Vol.23, No.1, 77-80, 2006
Hydrotalcites for adsorption of CO2 at high temperature
Adsorption of carbon dioxide by hydrotalcites was investigated by using a gravimetric method at 450 ℃. Hydrotalcites possessed higher adsorption capacity of CO2 than other basic materials such as MgO and Al2O3. Two different preparation methods of hydrotalcite with varying Mg/Al ratio were employed to determine their effects on the adsorption capacity of CO2. In addition, varying amounts of K2CO3 were impregnated on the hydrotalcite to further increase its adsorption capacity of CO2. The hydrotalcite prepared by the high supersaturation method with Mg/Al=2 showed the most favorable adsorption-desorption pattern with high adsorption capacity of CO2. K2CO3 impregnation on the hydrotalcite increased the adsorption capacity of CO2 because it changed both the chemical and the physical properties of the hydrotalcite. The optimum amount of K2CO3 impregnation was 20 wt%. The hydrotalcite prepared by the high supersaturation method with Mg/Al=2 and 20 wt% K2CO3 impregnation has the highest adsorption capacity of CO2 with 0.77 mmol CO2/g at 450 ℃ and 800 mmHg.
[References]
- Cativiela C, Figueras F, Fraile JM, Garcia JI, Mayoral JA, Tetrahedron Lett., 36, 4125, 1995
- Corma A, Iborra S, Primo J, Rey F, Appl. Catal. A: Gen., 114(2), 215, 1994
- Hoffman JS, Pennline HW, Investigation of CO2 capture using regenerable sorbents, Proc. of the 17th Annual International Pittsburgh Coal Conference, 2000
- Hufton JR, Mayorga S, Sircar S, AIChE J., 45(2), 248, 1999
- Hufton JR, Mayorga S, Gaffiney T, Nataraj S, Rao M, Sircar S, Proc. U.S. DOE Hydrogen Program Rev, 693, 1998
- Mckenzie AL, Fishel CT, Davis RJ, J. Catal., 138, 547, 1992
- Narayanan S, Krishna K, Appl. Catal. A: Gen., 174(1-2), 221, 1998
- Parida K, Das J, J. Mol. Catal. A-Chem., 151, 185, 2000
- Reichle WT, J. Catal., 63, 295, 1980
- Reichle WT, Appl. Catal. A: Gen., 47, 69, 1996
- Schaper H, Berg-Slot JJ, Stork WHJ, Appl. Catal. A: Gen., 54, 79, 1989
- Velu S, Swamy CS, Appl. Catal. A: Gen., 145(1-2), 141, 1996
- Yong Z, Mata V, Rodriguez AE, Ind. Eng. Chem. Res., 40(1), 204, 2001
[Cited By]
- Lee S, Song HJ, Maken S, Yoo SK, Park JW, Kim S, Shim JG, Jang KR, Korean Journal of Chemical Engineering, 25(1), 1, 2008
- Lee SC, Chae HJ, Choi BY, Jung SY, Ryu CY, Park JJ, Baek JI, Ryu CK, Kim JC, Korean Journal of Chemical Engineering, 28(2), 480, 2011
- Nong L, Xiao C, Jiang W, Korean Journal of Chemical Engineering, 28(3), 933, 2011
- Kim MJ, Kim H, Jeong KE, Jeong SY, Park YK, Jeon JK, Journal of Industrial and Engineering Chemistry, 16(4), 539, 2010
- Min YJ, Hong SM, Kim SH, Lee KB, Jeon SG, Korean Journal of Chemical Engineering, 31(9), 1668, 2014
- Jang HJ, Kim S, Lee KB, Korean Journal of Chemical Engineering, 34(1), 1, 2017
- Nguyen HKD, Nguyen TD, Hoang DN, Dao DS, Nguyen TT, Wanwisa L, Hoang LL, Korean Journal of Chemical Engineering, 34(2), 314, 2017
- Yang Y, Chen K, Huang L, Li M, Zhang T, Zhong M, Ning P, Wang J, Wen S, Journal of Industrial and Engineering Chemistry, 102, 86, 2021
|