|
Korean Journal of Chemical Engineering, Vol.16, No.5, 698-702, 1999
Flow Characteristics of Gas-Liquid Two Phase Plunging Jet Absorber-Gas Holdup and Bubble Penetration Depth-
A gas-liquid two phase plunging jet is formed through a gas sucking type multi-jet ejector nozzle. In this study, the effects of various conditions in the multi-jet ejector nozzle, the column diameter, and the liquid jet length on penetration depth of air bubbles lB and gas holdup hG in a gas-liquid two phase plunging jet absorber were studied experimentally. Consequently, empirical equations concerning lB and hG were obtained, respectively. These equations agree with the experimental data with an accuracy of ±20% for lB and ±25% for hG.
[References]
- Bin A, Smith JM, Chem. Eng. Commun., 15, 367, 1982
- Bin A, Chem. Eng. Sci., 48, 3585, 1993
- Burgess JM, Molloy NA, Chem. Eng. Sci., 28, 183, 1973
- Burgess JM, Molloy NA, McCarthy MJ, Chem. Eng. Sci., 27, 442, 1972
- Funatsu K, Hsu Y, Noda M, Sugawa S, Chem. Eng. Commun., 73, 121, 1988
- Ide M, Mada J, Kag. Kog. Ronbunshu, 12, 224, 1986
- Ide M, Mada J, Kawabata S, Shinohara H, Kag. Kog. Ronbunshu, 2, 439, 1976
- Kusabiraki D, Niki H, Yamagiwa K, Ohkawa A, Can. J. Chem. Eng., 68, 893, 1990
- Mckeoh EJ, Ervine DA, Chem. Eng. Sci., 36, 1161, 1981
- Nishikawa M, Yonezawa Y, Kayama T, Koyama K, Nagata S, J. Chem. Eng. Jpn., 9, 214, 1976
- Ohkawa A, Kusabiraki D, Sakai N, J. Chem. Eng. Jpn., 20, 295, 1987
- Ohkawa A, Shiokawa Y, Sakai N, Endoh K, J. Chem. Eng. Jpn., 18, 172, 1985
- Smigelschi O, Susiu GD, Chem. Eng. Sci., 32, 889, 1977
- Susiu GD, Smigelschi O, Chem. Eng. Sci., 31, 1217, 1976
- Tojo K, Miyanami K, Chem. Eng. J., 24, 89, 1982
- van de Sade E, Smith JM, Chem. Eng. J., 10, 225, 1975
- Weisweiler W, Rosch S, Ger. Chem. Eng., 1, 212, 1978
[Cited By]
- Lee KB, Chun BH, Lee JC, Park CJ, Kim SH, Korean Journal of Chemical Engineering, 19(1), 87, 2002
- Kim DS, Lee Y, Lee DH, Korean Journal of Chemical Engineering, 26(1), 288, 2009
- Alizadehdakhel A, Rahimi M, Alsairafi AA, Korean Journal of Chemical Engineering, 26(2), 475, 2009
|