Search / Korean Journal of Chemical Engineering
Total 30 articles [ 저자: 김성현 ]
No. Article
11 HWAHAK KONGHAK, 41 (4), pp.485-490 (2003)
불소화 처리가 폴리이미드 필름의 표면 및 유전특성에 미치는 영향
Influence of Fluorination on Surface and Dielectric Characteristics of Polyimide Thin Film

박수진, 조기숙, 김성현
12 HWAHAK KONGHAK, 41 (1), pp.122-128 (2003)
폐윤활유 연속 주입식 열분해 반응기에서 생성되는 탄소 침적체의 특성
Characteristics of Deposited Carbon on the Pyrolysis Reactor Wall with Continuous Feeding of Waste Lubricating Oil

김관문, 김영석, 정성욱, et al.
13 HWAHAK KONGHAK, 40 (6), pp.735-740 (2002)
GPS(Glycidoxypropyl Trimethoxysilane)을 이용한 친수성 코팅 필름의 제조
Preparation of Hydrophilic Coating Film Using GPS(Glycidoxypropyl Trimethoxysilane)

박정국, 송기창, 강현욱, et al.
14 HWAHAK KONGHAK, 40 (5), pp.613-617 (2002)
코로나 방전처리에 의한 폴리이미드 필름의 표면 및 접착특성에 관한 연구
Surface and Adhesion Characteristics of Polyimide Film Treated by Corona Discharge

박수진, 조기숙, 김성현
15 HWAHAK KONGHAK, 40 (2), pp.196-202 (2002)
암모니아-물 기포분사형 흡수기의 물질전달 모사 및 실험 연구
The Study on Model Simulation and Experiment for Mass Transfer in Bubble Mode Absorber of Ammonia and Water

이재철, 이기봉, 전병희, et al.
16 HWAHAK KONGHAK, 40 (2), pp.274-279 (2002)
계면활성제를 이용한 흡수식 열펌프 성능향상에 관한 수치 해석 연구
Numerical Study for Performance Enhancement of Absorption Heat Pump by Surfactants

이찬호, 하종주, 이재철, et al.
17 HWAHAK KONGHAK, 39 (6), pp.750-756 (2001)
슬러리 반응기에서 액상 디메틸에테르 합성의 물질 전달 해석
Analysis of Mass Transfer in a Slurry Reactor for Dimethyl Ether Synthesis

최정운, 이상호, 심규성, et al.
18 HWAHAK KONGHAK, 39 (6), pp.757-762 (2001)
반 회분식 반응기에서 polypropylene의 등온 및 비등온 열분해반응 특성
Isothermal and Non-isothermal Pyrolysis Characteristics of Polypropylene in Stirred Batch Reactor

김승수, 박찬진, 김성현
19 HWAHAK KONGHAK, 39 (2), pp.245-250 (2001)
UV/TiO2 시스템을 이용한 수용성 절삭유의 분해특성에 관한 연구
Photodegradation of Water-Soluble Cutting Oil Using UV/TiO2 System

이창훈, 박찬진, 김성현
20 HWAHAK KONGHAK, 38 (5), pp.732-738 (2000)
회분식 반응기에서 Polystyrene의 열분해 반응 특성
Pyrolysis Characteristics of Polystyrene on Stirred Batch Reactor

김승수, 전병희, 박찬진, et al.
[1] 2 [3]