Search / Korean Journal of Chemical Engineering
HWAHAK KONGHAK,
Vol.37, No.3, 430-438, 1999
Dry Sorbent Injection에 의한 배가스 처리:Calcium계와 금속산화물 흡착제를 이용한 HF 제거
Emission Control of Flue Gas by Dry Sorbent Injection : HF Removal by Calcium-Based and Metal Oxide Sorbents
DSI공정을 이용하여 배가스 내의 HF를 제거하기 위하여 여러 가지 실험변수들에 따른 HF와 calcium계 흡착제의 반응성을 고찰하였다. 250-950℃의 반응온도구간에서 고정층 반응기로부터 배출되는 기체를 GC로 분석하였으며, 반응기구를 확인하기 위하여 BET, XRD, SEM/EDX, DLS, TG/DTA등의 기기 분석을 수행하였다. Calcium계 흡착제는 750℃에서 가장 높은 반응성을 나타냈다. 그 이상의 온도에서는 흡착제의 구조적 변화로 인하여 비표면적이 감소하므로 반응성이 저하되었다. 유입되는 HF의 초기 농도가 높을수록 반응성은 우수하였으며, HF의 유량은 150ml/min일 경우에 반응성이 가장 우수하였다. Calcium계 흡착제 이외에 Al2O3, Cu2O, Fe2O3, MgO, TiO2, ZnO와 같은 금속산화물 흡착제와 HF의 반응성을 살펴본 결과, 본 연구의 실험 조건하에서는 Fe2O3가 가장 반응성이 좋은 것으로 확인되었다.
In order to reduce HF in a flue gas via DSI process, the HF removal efficiency of calcium-based sorbent was investigated. By using gas chromatography the effluent gas exited from fixed-bed reactor was analyzed at temperature range of 250-950 ℃. Also BET, XRD, SEM/EDX, DLS and TG/DTA were carried out to certify the reaction mechanism. HF removal efficiency was maximum at 750 ℃ and decreased above this temperature because of specific surface area reduction resulted from structural changes of sorbent. Reactivity of sorbent was proportional to initial concentration of HF and flow rate of 150 ml/min showed the highest removal capacity. In addition, HF removal efficiency of various metal oxide sorbents such as A12O3, Cu2O, Fe2O3, MgO, TiO2 and ZnO was studied. As a result, Fe2O3 showed an excellent removal capacity in this study.
[References]
  1. Budavari S, "The Merck Index," 12th ed., Marck & Co., Inc. Whitehouse Station, NJ, 1996
  2. Lewis RJ, "Hawley's Condensed Chemical Dictionary," 12th ed., Van Nostrand Reinhold Co., New York, NY, 1993
  3. Ji PS, Park TJ, Kim JJ, Chem. Ind. Technol., 11, 14, 1993
  4. James TY, Richard JD, James IJ, Am. Chem. Soc., 349, 1982
  5. Chappel PJ, Lachapelle DG, Kaplan N, EPRI Report, 1, Fundamental Research and Process Development, 1985
  6. Rosenhoover WA, Yoon H, Consolidation Coal Company Report, 1, 1989
  7. Toshinori O, Kenro T, Daizo K, Takehiro F, J. Chem. Eng. Jpn., 18(5), 432, 1985
  8. Stouffer NR, Yoon H, Burke FP, Ind. Eng. Chem. Res., 28(1), 20, 1989
  9. Muzio LJ, Offen GR, JAPCA, 37(5), 642, 1987
  10. Yoon H, Souffer MR, Rosenhoober WA, Withum JA, Burke FP, Environ. Prog., 7(2), 104, 1988
  11. Hajaligol MR, Longwell JP, Saforim AF, Ind. Eng. Chem. Res., 27(12), 2203, 1988
  12. Martin RJ, Keely T, Ohmine S, Chu EK, J. Eng. Gas Turbines Power, 110, 111, 1988
  13. Kresovich N, Stern RD, Stokes EA, Clark CC, Dahlin RS, The Association Dedicated to Air Pollution Control and Hazardous Waste Management, 28(2), 1, 1988
  14. Newton GH, Harrison DJ, Silcox GD, Pershing DW, Environ. Prog., 5(2), 140, 1986
  15. Attig RC, Sedor R, "Additive Injection for Sulfur Dioxide Control-A Pilot Plant Study," NTIS PB 226-761, EPA APTD 1176, U.S. EPA AEERL, pp. E3, E8, March, 1970
  16. Gartrell FE, "Full-Scale Desulfurization of Stack Gas by Dry Limestone Injection," Vol(I-III), NTIS PB 228-447, EPA 650/2-73-019, August, 1973
  17. Liu H, Chaffee R, "Evaluation of Fabric Filter as Chemical Contactor for Control of Sulfur Dioxide from Flue Gas," Dept. of Health, Education and Welfare, Contract PH 22-68-51, 1970
  18. Zallen DM, Gershman MH, Nurick W, "Generalization of Low Emission Coal Burner Technology," in Proceedings of the Third Stationary Source Combustion Symposium, Vol. II, NTIS PB 292-540, EPA 600/7-79-050b, 1979
  19. Hartman M, Tranka O, AIChE J., 39, 615, 1993
  20. Doraiswamy LK, Shama MM, "Heterogeneous Reactions: Analysis, Examples, and Reactor Design-vol. 1: Gas-Solid and Solid-Solid Reactions," John Wiley & Sons, Inc., 1984
  21. Burkat VS, Russian J. Appl. Chem., 68(6), Part 2, 1995
  22. Marcilly C, Courty P, Delmon G, J. Am. Ceram. Soc., 53, 56, 1970
  23. Ahmad A, Mikhail S, Chehab S, Owens D, Turcotte A, J. Mater. Sci., 27, 1772, 1992
  24. Lee YS, Park DH, Kim HT, Yoo KO, Korean J. Chem. Eng., 12(1), 23, 1995
  25. Borgwardt RH, Environ. Sci. Technol., 4, 59, 1970